hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Used Mikro Pulverizer Mills

8 Mikro Pulverizer Mills

Enter to Search

Used: Stainless Steel Ascoat Lakso Fluid Bed Wurster Coater, model 2XP HT

Stock# 82978

USED: Ascoat Lakso Fluid Bed Wurster Coater, model 2XP HT. All stainless steel construction including chamber, bottom housing, dust collector, filter chamber, stand and control panel. Electrically heated, 4" Wurster section, HEPA filter and controls.

Used- Carbon Steel Mikro Pulverizer, Model 4TH

Stock# 71957

Used- Mikro Pulverizer, Model 4TH, Carbon Steel. 20" diameter x 12" wide rotor with 8 rows of 4 LFS stirrup hammers. 3 approximate 2" diameter screw feed driven by a 1-1/2 hp DC motor. Main drive is a 15 hp, 3/60/230/460 volt, 1760 rpm motor. Includes bottom screen. Unit mounted on a 42" wide x 60" long x 26" high stand.

Used: Stainless Steel Mikro Pulverizer

Stock# 86594

USED- Mikro Pulverizer, Carbon Steel. Approximate 20" diameter x 12" wide rotor with 16 rows of 4 swinging stirrup hammers. 13" x 15" top feed with 304 stainless steel hopper, triple screw chamber feed, approximate 2" diameter x 8" long screws, driven by a 1 1/2 HP, 3/60/230/460 Volt, 1750 RPM XP gearmotor, ratio 3.6:1. Main dri more info...

Used- PPS Kemutec Air Classifier Mill, Model 5-CMT, Carbon Steel.

Stock# 45689027

Used- PPS Kemutec Air Classifier Mill, Model 5-CMT, Carbon Steel. Approximate 20" diameter x 8.5" deep chamber. Inner disk 11.5" diameter. Driven by a 40 hp, 3/60/460/3450 rpm motor. top hinged cover, 8.5" top opening, side openings: 3.25", 10" x 7", no MFG tag, (2) control panels.

Used- Carbon Steel Mikro Pulverizer, Model 38CB

Stock# 83213

Used- Mikro Pulverizer, Model 38CB, Carbon Steel. 14" Diameter x 14" wide rotor with approximately 6 rows of 36 swinging hammers. Gravity feed with chute, bottom screen, set up for blower discharge. Driven by a 40 hp, 3/60/460 volt, 3560 rpm motor. Mounted on a carbon steel frame.

Used- Carbon Steel Mikro pulverizer, model 3TH

Stock# 24644003

Used- Mikro pulverizer, model 3TH, carbon steel. 14" diameter x 14" wide rotor with approx 14 rows of 4 swinging stirrup hammers. Gravity feed with hopper, bottom screen, set up for blower discharge. Driven by a 40 hp, 3/60/460 volt, 3560 rpm motor. Mounted carbon steel frame.

Used- Stainless Steel Mikro Pulverizer, Model 3TH

Stock# 80616

Used- Mikro Pulverizer, Model 3TH, 301 Stainless Steel. Approximate 10" diameter x 12" wide rotor with 6 rows of approximately (36) 1-1/8" wide x 3/16" thick swinging hammers. Top feed, bottom discharge with a 36" diameter x 22" long coned hopper. Driven by a 50 hp, 3/60/230/460 volt, 1765 rpm motor. Unit requires frame/table mo more info...

Used- Hosokawa Mikropul Pulverizer, Model 60ACM

Stock# 45689025

Used- Hosokawa Mikropul Pulverizer, Model 60ACM, Carbon Steel. Approximate 31-1/2" diameter rotor. Driven by a 75 hp, 3/60/230/460 volt, 1775 rpm motor. Separator driven by a 10 hp, 3/60/230/460 volt, 1760 rpm motor. Inlet 15-1/2" x 8-3/4", outlet 14" x 8". Includes control panel with Allen Bradley controls. Mounted on a carbon more info...

Used: Stainless Steel Ascoat Lakso Fluid Bed Wurster Coater, model 2XP HT

Used: Stainless Steel Ascoat Lakso Fluid Bed Wurster Coater, model 2XP HT

Stock# 82978

USED: Ascoat Lakso Fluid Bed Wurster Coater, model 2XP HT. All stainless steel construction including chamber, bottom housing, dust collector, filter chamber, stand and control panel. Electrically heated, 4" Wurster section, HEPA filter and controls.

HP: Mfr: Ascoat Model: 2XP HT Material: Stainless Steel
VIEW ITEM ADD TO CART

Used- Carbon Steel Mikro Pulverizer, Model 4TH

Used- Carbon Steel Mikro Pulverizer, Model 4TH

Stock# 71957

Used- Mikro Pulverizer, Model 4TH, Carbon Steel. 20" diameter x 12" wide rotor with 8 rows of 4 LFS stirrup hammers. 3 approximate 2" diameter screw feed driven by a 1-1/2 hp DC motor. Main drive is a 15 hp, 3/60/230/460 volt, 1760 rpm motor. Includes bottom screen. Unit mounted on a 42" wide x 60" long x 26" high stand.

HP: 15 Mfr: Mikro Corporation Model: 4TH Material: Carbon Steel
VIEW ITEM ADD TO CART

Used: Stainless Steel Mikro Pulverizer

Used: Stainless Steel Mikro Pulverizer

Stock# 86594

USED- Mikro Pulverizer, Carbon Steel. Approximate 20" diameter x 12" wide rotor with 16 rows of 4 swinging stirrup hammers. 13" x 15" top feed with 304 stainless steel hopper, triple screw chamber feed, approximate 2" diameter x 8" long screws, driven by a 1 1/2 HP, 3/60/230/460 Volt, 1750 RPM XP gearmotor, ratio 3.6:1. Main drive is a 30 HP, 3/60/208-220/440 Volt, 3545 RPM XP motor. Includes bottom screen. Unit mounted on a carbon steel frame.

HP: 30 Mfr: Mikro Corporation Model: N/A Material: Carbon Steel
VIEW ITEM ADD TO CART

Used- PPS Kemutec Air Classifier Mill, Model 5-CMT, Carbon Steel.

Used- PPS Kemutec Air Classifier Mill, Model 5-CMT, Carbon Steel.

Stock# 45689027

Used- PPS Kemutec Air Classifier Mill, Model 5-CMT, Carbon Steel. Approximate 20" diameter x 8.5" deep chamber. Inner disk 11.5" diameter. Driven by a 40 hp, 3/60/460/3450 rpm motor. top hinged cover, 8.5" top opening, side openings: 3.25", 10" x 7", no MFG tag, (2) control panels.

HP: 40 Mfr: Kemutec Model: 5-CMT Material: Carbon Steel
VIEW ITEM ADD TO CART

Used- Carbon Steel Mikro Pulverizer, Model 38CB

Used- Carbon Steel Mikro Pulverizer, Model 38CB

Stock# 83213

Used- Mikro Pulverizer, Model 38CB, Carbon Steel. 14" Diameter x 14" wide rotor with approximately 6 rows of 36 swinging hammers. Gravity feed with chute, bottom screen, set up for blower discharge. Driven by a 40 hp, 3/60/460 volt, 3560 rpm motor. Mounted on a carbon steel frame.

HP: 40 Mfr: Mikro Corporation Model: 38CB Material: Carbon Steel
VIEW ITEM ADD TO CART

Used- Carbon Steel Mikro pulverizer, model 3TH

Used- Carbon Steel Mikro pulverizer, model 3TH

Stock# 24644003

Used- Mikro pulverizer, model 3TH, carbon steel. 14" diameter x 14" wide rotor with approx 14 rows of 4 swinging stirrup hammers. Gravity feed with hopper, bottom screen, set up for blower discharge. Driven by a 40 hp, 3/60/460 volt, 3560 rpm motor. Mounted carbon steel frame.

HP: 40 Mfr: Mikro Corporation Model: 3TH Material: cs
VIEW ITEM ADD TO CART

Used- Stainless Steel Mikro Pulverizer, Model 3TH

Used- Stainless Steel Mikro Pulverizer, Model 3TH

Stock# 80616

Used- Mikro Pulverizer, Model 3TH, 301 Stainless Steel. Approximate 10" diameter x 12" wide rotor with 6 rows of approximately (36) 1-1/8" wide x 3/16" thick swinging hammers. Top feed, bottom discharge with a 36" diameter x 22" long coned hopper. Driven by a 50 hp, 3/60/230/460 volt, 1765 rpm motor. Unit requires frame/table mounting.

HP: 50 Mfr: Mikro Corporation Model: 3TH Material: 301SS
VIEW ITEM ADD TO CART

Used- Hosokawa Mikropul Pulverizer, Model 60ACM

Used- Hosokawa Mikropul Pulverizer, Model 60ACM

Stock# 45689025

Used- Hosokawa Mikropul Pulverizer, Model 60ACM, Carbon Steel. Approximate 31-1/2" diameter rotor. Driven by a 75 hp, 3/60/230/460 volt, 1775 rpm motor. Separator driven by a 10 hp, 3/60/230/460 volt, 1760 rpm motor. Inlet 15-1/2" x 8-3/4", outlet 14" x 8". Includes control panel with Allen Bradley controls. Mounted on a carbon steel base. Serial # 81C5058.

HP: 75 Mfr: Hosokawa Model: 60ACM Material: Carbon Steel
VIEW ITEM ADD TO CART
  • Used: Stainless Steel Ascoat Lakso Fluid Bed Wurster Coater, model 2XP HT

    USED: Ascoat Lakso Fluid Bed Wurster Coater, model 2XP HT. All stainless steel construction including chamber, bottom housing, dust collector, filter chamber, stand and control panel. Electrically heated, 4" Wurster section, HEPA filter and controls.

    VIEW ITEM Add to Cart
  • Used- Carbon Steel Mikro Pulverizer, Model 4TH

    Used- Mikro Pulverizer, Model 4TH, Carbon Steel. 20" diameter x 12" wide rotor with 8 rows of 4 LFS stirrup hammers. 3 approximate 2" diameter screw feed driven by a 1-1/2 hp DC motor. Main drive is a 15 hp, 3/60/230/460 volt, 1760 rpm motor. Includes bottom screen. Unit mounted on a 42" wide x 60" long x 26" high stand.

    VIEW ITEM Add to Cart
  • Used: Stainless Steel Mikro Pulverizer

    USED- Mikro Pulverizer, Carbon Steel. Approximate 20" diameter x 12" wide rotor with 16 rows of 4 swinging stirrup hammers. 13" x 15" top feed with 304 stainless steel hopper, triple screw chamber feed, approximate 2" diameter x 8" long screws, driven by a 1 1/2 HP, 3/60/230/460 Volt, 1750 RPM XP gearmotor, ratio 3.6:1. Main drive is a 30 HP, 3/60/208-220/440 Volt, 3545 RPM XP motor. Includes bottom screen. Unit mounted on a carbon steel frame.

    VIEW ITEM Add to Cart
  • Used- PPS Kemutec Air Classifier Mill, Model 5-CMT, Carbon Steel.

    Used- PPS Kemutec Air Classifier Mill, Model 5-CMT, Carbon Steel. Approximate 20" diameter x 8.5" deep chamber. Inner disk 11.5" diameter. Driven by a 40 hp, 3/60/460/3450 rpm motor. top hinged cover, 8.5" top opening, side openings: 3.25", 10" x 7", no MFG tag, (2) control panels.

    VIEW ITEM Add to Cart
  • Used- Carbon Steel Mikro Pulverizer, Model 38CB

    Used- Mikro Pulverizer, Model 38CB, Carbon Steel. 14" Diameter x 14" wide rotor with approximately 6 rows of 36 swinging hammers. Gravity feed with chute, bottom screen, set up for blower discharge. Driven by a 40 hp, 3/60/460 volt, 3560 rpm motor. Mounted on a carbon steel frame.

    VIEW ITEM Add to Cart
  • Used- Carbon Steel Mikro pulverizer, model 3TH

    Used- Mikro pulverizer, model 3TH, carbon steel. 14" diameter x 14" wide rotor with approx 14 rows of 4 swinging stirrup hammers. Gravity feed with hopper, bottom screen, set up for blower discharge. Driven by a 40 hp, 3/60/460 volt, 3560 rpm motor. Mounted carbon steel frame.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Mikro Pulverizer, Model 3TH

    Used- Mikro Pulverizer, Model 3TH, 301 Stainless Steel. Approximate 10" diameter x 12" wide rotor with 6 rows of approximately (36) 1-1/8" wide x 3/16" thick swinging hammers. Top feed, bottom discharge with a 36" diameter x 22" long coned hopper. Driven by a 50 hp, 3/60/230/460 volt, 1765 rpm motor. Unit requires frame/table mounting.

    VIEW ITEM Add to Cart
  • Used- Hosokawa Mikropul Pulverizer, Model 60ACM

    Used- Hosokawa Mikropul Pulverizer, Model 60ACM, Carbon Steel. Approximate 31-1/2" diameter rotor. Driven by a 75 hp, 3/60/230/460 volt, 1775 rpm motor. Separator driven by a 10 hp, 3/60/230/460 volt, 1760 rpm motor. Inlet 15-1/2" x 8-3/4", outlet 14" x 8". Includes control panel with Allen Bradley controls. Mounted on a carbon steel base. Serial # 81C5058.

    VIEW ITEM Add to Cart
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200