hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Used Fluid Energy Mills

6 Fluid Energy Mills

Enter to Search

Used- Stainless Steel Fluid Air Impact/Screening Mill, Model 014

Stock# 45198005

Used- Fluid Air Impact/Screening Mill, Model 014, 304 Stainless Steel. Stainless steel fixed rotor with (8) Approximate 1" thick bars, 14" x 15" cutting chamber with bottom screen. Approximate 2-7/8" diameter screw fed feed throat, driven by a 1.5hp, 3/60/200-230/460 volt 1725 rpm gear motor, ratio 20 to 1. Mill driven by a 20hp more info...

Unused- Alpine-Hosokawa 1500/3 AFG Jet Mill System/Plant

Stock# 42371001

Unused- Alpine-Hosokawa 1500/3 AFG Jet Mill System/Plant. Consisting of: (1) Alpine-Hosokawa 1500/3 AFG jet mill in stainless steel;(1) Ingersoll Rand compressor type 10,000 cfm; (1) feed hopper, 60 cubic foot working volume; (1) baghouse model JA-289-M12T, (1) fan incl 730 L-17, CW, Arr 8 discharge fan assembly; (1) inlet filte more info...

Used- Fluid Air Granumill Jr., 316 Stainless Steel

Stock# 42564009

Used- Fluid Air Granumill Jr., 316 Stainless Steel. Chamber measures 5-1/2" diameter x approximately 3" deep. One piece cantilever rotor with 2 impact profiles and bottom screen. 2" Sanitary top inlet, 2-1/2" x 2-1/2" sanitary outlet. 100-10,000 rpm maximum. Rated .2-60 lbs/ hr. Finished particle size of 2000-27 microns. Driven more info...

Used- Majac Donaldson Model A-12 Acucut Classifier.

Stock# 11252081

Used- Majac Donaldson Model A-12 Acucut Classifier. Laboratory size mechanical air separator. 12" diameter with 1 hp vari-speed rotor drive, (500 to 5500 rpm). Designed for very fine particle separation cuts involving material in the 1/2 to 35 micron range. Includes feeder, powder recovery system, 7.5 hp (90 CFM at 10" hg) prima more info...

Used- Stainless Steel Majac Jet Pulverizer Classifier, Model 7-10

Stock# 83117

Used- Majac Jet Pulverizer Classifier, Model 7-10. Stainless steel construction, dual nozzle pulverizing section with 30 hp variable speed classifier drive, 5 hp 230/460 volt K-tron twin screw volumetric feeder with hopper, interconnecting ductwork, 100 hp Hoffman blower and controls.

Used- Microfluidics Model M210AE/H Pilot Scale Microfluidizer Processor

Stock# 41177207

Used- Microfluidics Model M210AE/H Pilot Scale Microfluidizer Processor. Designed for high shear rates, maximizing the energy per unit fluid volume resulting in uniform submicron particle and droplet sizes. Pressure range 2,500 to 12,000 psi (170 to 810 bar), nominal flow rate range 1 to 1-1/2 gallons per minute, sample size 1 g more info...

Used- Stainless Steel Fluid Air Impact/Screening Mill, Model 014

Used- Stainless Steel Fluid Air Impact/Screening Mill, Model 014

Stock# 45198005

Used- Fluid Air Impact/Screening Mill, Model 014, 304 Stainless Steel. Stainless steel fixed rotor with (8) Approximate 1" thick bars, 14" x 15" cutting chamber with bottom screen. Approximate 2-7/8" diameter screw fed feed throat, driven by a 1.5hp, 3/60/200-230/460 volt 1725 rpm gear motor, ratio 20 to 1. Mill driven by a 20hp, 3/60/230/460 volt, 1770 rpm motor. Includes a control panel with (2) Toshiba inverter drives. Mounted on a stainless steel base with casters. Serial# 10063.

Mfr: 20 Material: Fluid Air
VIEW ITEM ADD TO CART

Unused- Alpine-Hosokawa 1500/3 AFG Jet Mill System/Plant

Unused- Alpine-Hosokawa 1500/3 AFG Jet Mill System/Plant

Stock# 42371001

Unused- Alpine-Hosokawa 1500/3 AFG Jet Mill System/Plant. Consisting of: (1) Alpine-Hosokawa 1500/3 AFG jet mill in stainless steel;(1) Ingersoll Rand compressor type 10,000 cfm; (1) feed hopper, 60 cubic foot working volume; (1) baghouse model JA-289-M12T, (1) fan incl 730 L-17, CW, Arr 8 discharge fan assembly; (1) inlet filter/silencer; (1) operator terminal incl A-B 1336 Plus 11 variable frequency drive and A-B PLC 500 system; (1) tank weigh module - load cell; (1) Delvac bag collector; (1) PO pump 30/12/6; (1) PO pump 50/12/8; (1) 1.7 Cub meter sq surge hopper; (1) 6.0 Cub meter sq surge bin C/Bugemann; (1) new low carbon ash silo.

Mfr: Alpine Material:
VIEW ITEM ADD TO CART

Used- Fluid Air Granumill Jr., 316 Stainless Steel

Used- Fluid Air Granumill Jr., 316 Stainless Steel

Stock# 42564009

Used- Fluid Air Granumill Jr., 316 Stainless Steel. Chamber measures 5-1/2" diameter x approximately 3" deep. One piece cantilever rotor with 2 impact profiles and bottom screen. 2" Sanitary top inlet, 2-1/2" x 2-1/2" sanitary outlet. 100-10,000 rpm maximum. Rated .2-60 lbs/ hr. Finished particle size of 2000-27 microns. Driven by a 1/2 hp variable speed drive. Includes a control panel and semi-power digital display. Built 2001.

Mfr: Fluid Air Material: 316 Stainless Steel
VIEW ITEM ADD TO CART

Used- Majac Donaldson Model A-12 Acucut Classifier.

Used- Majac Donaldson Model A-12 Acucut Classifier.

Stock# 11252081

Used- Majac Donaldson Model A-12 Acucut Classifier. Laboratory size mechanical air separator. 12" diameter with 1 hp vari-speed rotor drive, (500 to 5500 rpm). Designed for very fine particle separation cuts involving material in the 1/2 to 35 micron range. Includes feeder, powder recovery system, 7.5 hp (90 CFM at 10" hg) primary air blower, and controls. Rated from 1-20 pounds/hour. No nameplate on this unit. Last use in pharmaceutical processing.

Mfr: Majac Material:
VIEW ITEM ADD TO CART

Used- Stainless Steel Majac Jet Pulverizer Classifier, Model 7-10

Used- Stainless Steel Majac Jet Pulverizer Classifier, Model 7-10

Stock# 83117

Used- Majac Jet Pulverizer Classifier, Model 7-10. Stainless steel construction, dual nozzle pulverizing section with 30 hp variable speed classifier drive, 5 hp 230/460 volt K-tron twin screw volumetric feeder with hopper, interconnecting ductwork, 100 hp Hoffman blower and controls.

Mfr: Majac Material: Stainless Steel
VIEW ITEM ADD TO CART

Used- Microfluidics Model M210AE/H Pilot Scale Microfluidizer Processor

Used- Microfluidics Model M210AE/H Pilot Scale Microfluidizer Processor

Stock# 41177207

Used- Microfluidics Model M210AE/H Pilot Scale Microfluidizer Processor. Designed for high shear rates, maximizing the energy per unit fluid volume resulting in uniform submicron particle and droplet sizes. Pressure range 2,500 to 12,000 psi (170 to 810 bar), nominal flow rate range 1 to 1-1/2 gallons per minute, sample size 1 gallon to continuous. Mounted on casters. Motor is 15 hp and is rated for Hazardous Location, Box is rated for Class 1, Group C & D. Class 2 Group E,F,G. 316 stainless steel. 3/60/208/230/460V.

Mfr: Microfluidics Material: 316 Stainless Steel
VIEW ITEM ADD TO CART
  • Used- Stainless Steel Fluid Air Impact/Screening Mill, Model 014

    Used- Fluid Air Impact/Screening Mill, Model 014, 304 Stainless Steel. Stainless steel fixed rotor with (8) Approximate 1" thick bars, 14" x 15" cutting chamber with bottom screen. Approximate 2-7/8" diameter screw fed feed throat, driven by a 1.5hp, 3/60/200-230/460 volt 1725 rpm gear motor, ratio 20 to 1. Mill driven by a 20hp, 3/60/230/460 volt, 1770 rpm motor. Includes a control panel with (2) Toshiba inverter drives. Mounted on a stainless steel base with casters. Serial# 10063.

    VIEW ITEM Add to Cart
  • Unused- Alpine-Hosokawa 1500/3 AFG Jet Mill System/Plant

    Unused- Alpine-Hosokawa 1500/3 AFG Jet Mill System/Plant. Consisting of: (1) Alpine-Hosokawa 1500/3 AFG jet mill in stainless steel;(1) Ingersoll Rand compressor type 10,000 cfm; (1) feed hopper, 60 cubic foot working volume; (1) baghouse model JA-289-M12T, (1) fan incl 730 L-17, CW, Arr 8 discharge fan assembly; (1) inlet filter/silencer; (1) operator terminal incl A-B 1336 Plus 11 variable frequency drive and A-B PLC 500 system; (1) tank weigh module - load cell; (1) Delvac bag collector; (1) PO pump 30/12/6; (1) PO pump 50/12/8; (1) 1.7 Cub meter sq surge hopper; (1) 6.0 Cub meter sq surge bin C/Bugemann; (1) new low carbon ash silo.

    VIEW ITEM Add to Cart
  • Used- Fluid Air Granumill Jr., 316 Stainless Steel

    Used- Fluid Air Granumill Jr., 316 Stainless Steel. Chamber measures 5-1/2" diameter x approximately 3" deep. One piece cantilever rotor with 2 impact profiles and bottom screen. 2" Sanitary top inlet, 2-1/2" x 2-1/2" sanitary outlet. 100-10,000 rpm maximum. Rated .2-60 lbs/ hr. Finished particle size of 2000-27 microns. Driven by a 1/2 hp variable speed drive. Includes a control panel and semi-power digital display. Built 2001.

    VIEW ITEM Add to Cart
  • Used- Majac Donaldson Model A-12 Acucut Classifier.

    Used- Majac Donaldson Model A-12 Acucut Classifier. Laboratory size mechanical air separator. 12" diameter with 1 hp vari-speed rotor drive, (500 to 5500 rpm). Designed for very fine particle separation cuts involving material in the 1/2 to 35 micron range. Includes feeder, powder recovery system, 7.5 hp (90 CFM at 10" hg) primary air blower, and controls. Rated from 1-20 pounds/hour. No nameplate on this unit. Last use in pharmaceutical processing.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Majac Jet Pulverizer Classifier, Model 7-10

    Used- Majac Jet Pulverizer Classifier, Model 7-10. Stainless steel construction, dual nozzle pulverizing section with 30 hp variable speed classifier drive, 5 hp 230/460 volt K-tron twin screw volumetric feeder with hopper, interconnecting ductwork, 100 hp Hoffman blower and controls.

    VIEW ITEM Add to Cart
  • Used- Microfluidics Model M210AE/H Pilot Scale Microfluidizer Processor

    Used- Microfluidics Model M210AE/H Pilot Scale Microfluidizer Processor. Designed for high shear rates, maximizing the energy per unit fluid volume resulting in uniform submicron particle and droplet sizes. Pressure range 2,500 to 12,000 psi (170 to 810 bar), nominal flow rate range 1 to 1-1/2 gallons per minute, sample size 1 gallon to continuous. Mounted on casters. Motor is 15 hp and is rated for Hazardous Location, Box is rated for Class 1, Group C & D. Class 2 Group E,F,G. 316 stainless steel. 3/60/208/230/460V.

    VIEW ITEM Add to Cart
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200