hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Used Scraped Surface Heat Exchangers

12 Scraped Surface Heat Exchangers

Enter to Search

Used- Tetra Pak Continuous Ice Cream Freezer.

Stock# 49008001

Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

Used- Tetra Pak Continuous Ice Cream Freezer.

Stock# 49008002

Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

Used- Tetra Pak Continuous Ice Cream Freezer.

Stock# 49008003

Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

Votator Turba-Film Agitated Thin Film Evaporator, Model 18-072, 316L Stainless Steel. 26 Square fe...

Stock# 49554004

Used- Votator Turba-Film Agitated Thin Film Evaporator, Model 18-072, 316L Stainless Steel. 26 Square feet heat transfer area. (1) 18" Diameter x 72" long vertical chamber with a 4 point rotor. Internal rated FV at 40 to 400 degrees F. (1) Carbon steel thermal section rated 150 psi at 40 to 400 degrees F. 2 Tri-clamp feed, 10" more info...

Used- Stainless Steel Twin Tube Scrape Surface Heat Exchanger

Stock# 86130

Used- Twin Tube Scrape Surface Heat Exchanger, 304 Stainless Steel. Approximate 6 square feet heat transfer surface, (2) 6" diameter x 24" long jacketed tubes. Plastic scraper blades. 3" tri clamp inlet/outlet. Each tube driven by an approximate 5 hp gearmotor. Includes control panel. Mounted on a carbon steel frame.

Used: Stainless Steel Cherry Burrell Votator Scraped Surface Heat Exchanger

Stock# 40069005

Used: Cherry Burrell Votator Scraped Surface Heat Exchanger, Model 6 x 24, 316 stainless steel. (1) 6" diameter x 24" long jacketed horizontal chamber with (8) blades. Jacket rated 150 psi at 375 degrees F, shell rated 400 psi at 375 degrees F. Driven by a 7-1/2 hp, 3/60/230/460 volt, 1760 rpm XP gear motor. Includes a Waukesh more info...

Used- Cherry-Burrell Votator Scraped Surface Heat Exchanger

Stock# 43081003

Used- Cherry-Burrell Votator Scraped Surface Heat Exchanger, 6 Square Feet, Model 1C648F, Stainless Steel. (1) 6" Diameter x 48" long carbon steel jacket horizontal chamber. Internal rated 400 psi at 375 degrees F, jacket rated 150 psi at 375 degrees F. Top inlet, end outlet. Driven by a 15 hp, 3/60/230/460 volt, 1170 rpm motor. more info...

Used- Nickel Votator Triple Tube Scraped Surface Heat Exchanger System

Stock# 44731001

Used- Votator Triple Tube Scraped Surface Heat Exchanger System, Model SPEC2F80, 27 total square feet, SB161 nickel. (3) approximately 6" diameter x 72" long horizontal chambers. Internal rated 250 psi at 375 degrees F, carbon steel jacket rated 150 psi at 375 degrees F. 1-1/2" Tri-clamp inlet and outlet. Each tube driven by a 7 more info...

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Stock# 49097001

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 72" long. Rated 150 psi @ -20 to 400 Degrees F. Includes 40HP DC Drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8017, Serial# 91F0706, Drawing# 12AP457805, built 1991 more info...

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Stock# 49097002

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 72" long. Includes 40HP DC drive. Rated 150 psi @ -20 to 400 Degrees F. Includes 40HP DC drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8019, built 1991.

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Stock# 49097003

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 60" long. Rated 150 psi @ -20 to 400 Degrees F. With Drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8021, built 1991. Requires motor.

Chemetron Scraped Surface Heat Exchanger. Approximately 9 square feet, stainless steel. 6'' diamete...

Stock# 49273001

Used- Chemetron Scraped Surface Heat Exchanger. Approximately 9 square feet, stainless steel. 6'' diameter x 72'' long horizontal chamber. Internal rated 400 psi at 375 deg F, jacket rated 150 psi at 375 deg F. 1 1/2'' tri clamp inlet, 6'' outlet. Driven by a 15 hp, 3/60/220/440 volt, 1770 rpm cone drive, ratio 7.5 to 1. Mounted more info...

Used- Tetra Pak Continuous Ice Cream Freezer.

Used- Tetra Pak Continuous Ice Cream Freezer.

Stock# 49008001

Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

Dia (in): Len (in): Material: Mfr: TetraPak
VIEW ITEM ADD TO CART

Used- Tetra Pak Continuous Ice Cream Freezer.

Used- Tetra Pak Continuous Ice Cream Freezer.

Stock# 49008002

Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

Dia (in): Len (in): Material: Mfr: TetraPak
VIEW ITEM ADD TO CART

Used- Tetra Pak Continuous Ice Cream Freezer.

Used- Tetra Pak Continuous Ice Cream Freezer.

Stock# 49008003

Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

Dia (in): Len (in): Material: Mfr: TetraPak
VIEW ITEM ADD TO CART

Votator Turba-Film Agitated Thin Film Evaporator, Model 18-072, 316L Stainless Steel. 26 Square fe...

 Votator Turba-Film Agitated Thin Film Evaporator, Model 18-072, 316L Stainless Steel.  26 Square fe...

Stock# 49554004

Used- Votator Turba-Film Agitated Thin Film Evaporator, Model 18-072, 316L Stainless Steel. 26 Square feet heat transfer area. (1) 18" Diameter x 72" long vertical chamber with a 4 point rotor. Internal rated FV at 40 to 400 degrees F. (1) Carbon steel thermal section rated 150 psi at 40 to 400 degrees F. 2 Tri-clamp feed, 10" vapor outlet, 2" tri-clamp bottom outlet. Driven by a 25 hp, 3/60/230/460 volt, 1170 rpm motor. Includes an Industrial Process Equipment 133 square foot vertical shell & tube heat exchanger, Model 1ST10-96. 304 Stainless steel tubes, carbon steel shell, both rated 150 psi at 300 degrees F.

Dia (in): Len (in): Material: 316L Mfr: Votator
VIEW ITEM ADD TO CART

Used- Stainless Steel Twin Tube Scrape Surface Heat Exchanger

Used- Stainless Steel Twin Tube Scrape Surface Heat Exchanger

Stock# 86130

Used- Twin Tube Scrape Surface Heat Exchanger, 304 Stainless Steel. Approximate 6 square feet heat transfer surface, (2) 6" diameter x 24" long jacketed tubes. Plastic scraper blades. 3" tri clamp inlet/outlet. Each tube driven by an approximate 5 hp gearmotor. Includes control panel. Mounted on a carbon steel frame.

Dia (in): 6 Len (in): 24 Material: 304 Stainless Steel Mfr:
VIEW ITEM ADD TO CART

Used: Stainless Steel Cherry Burrell Votator Scraped Surface Heat Exchanger

Used: Stainless Steel Cherry Burrell Votator Scraped Surface Heat Exchanger

Stock# 40069005

Used: Cherry Burrell Votator Scraped Surface Heat Exchanger, Model 6 x 24, 316 stainless steel. (1) 6" diameter x 24" long jacketed horizontal chamber with (8) blades. Jacket rated 150 psi at 375 degrees F, shell rated 400 psi at 375 degrees F. Driven by a 7-1/2 hp, 3/60/230/460 volt, 1760 rpm XP gear motor. Includes a Waukesha Cherry Burrell positive displacement pump, Model 030U2C, 316 stainless steel, rated .060 gallons per revolution. Driven by a 3 hp, 3/60/230/460 volt, 1755 rpm motor. Unitized on a stainless steel base on casters.

Dia (in): 6 Len (in): 24 Material: 316 Stainless Steel Mfr: Cherry Burrell
VIEW ITEM ADD TO CART

Used- Cherry-Burrell Votator Scraped Surface Heat Exchanger

Used- Cherry-Burrell Votator Scraped Surface Heat Exchanger

Stock# 43081003

Used- Cherry-Burrell Votator Scraped Surface Heat Exchanger, 6 Square Feet, Model 1C648F, Stainless Steel. (1) 6" Diameter x 48" long carbon steel jacket horizontal chamber. Internal rated 400 psi at 375 degrees F, jacket rated 150 psi at 375 degrees F. Top inlet, end outlet. Driven by a 15 hp, 3/60/230/460 volt, 1170 rpm motor. Mounted on a carbon steel frame.

Dia (in): 6 Len (in): 48 Material: Stainless Steel Mfr: Cherry Burrell
VIEW ITEM ADD TO CART

Used- Nickel Votator Triple Tube Scraped Surface Heat Exchanger System

Used- Nickel Votator Triple Tube Scraped Surface Heat Exchanger System

Stock# 44731001

Used- Votator Triple Tube Scraped Surface Heat Exchanger System, Model SPEC2F80, 27 total square feet, SB161 nickel. (3) approximately 6" diameter x 72" long horizontal chambers. Internal rated 250 psi at 375 degrees F, carbon steel jacket rated 150 psi at 375 degrees F. 1-1/2" Tri-clamp inlet and outlet. Each tube driven by a 7.5 hp motor. Mounted on a common carbon steel frame.

Dia (in): 6 Len (in): 72 Material: 316SS Mfr: Votator
VIEW ITEM ADD TO CART

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Stock# 49097001

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 72" long. Rated 150 psi @ -20 to 400 Degrees F. Includes 40HP DC Drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8017, Serial# 91F0706, Drawing# 12AP457805, built 1991.

Dia (in): 6 Len (in): Material: Mfr: APV/Crepaco
VIEW ITEM ADD TO CART

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Stock# 49097002

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 72" long. Includes 40HP DC drive. Rated 150 psi @ -20 to 400 Degrees F. Includes 40HP DC drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8019, built 1991.

Dia (in): 6 Len (in): 72 Material: 316 SS Mfr:
VIEW ITEM ADD TO CART

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

Stock# 49097003

Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 60" long. Rated 150 psi @ -20 to 400 Degrees F. With Drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8021, built 1991. Requires motor.

Dia (in): 6 Len (in): 72 Material: Mfr:
VIEW ITEM ADD TO CART

Chemetron Scraped Surface Heat Exchanger. Approximately 9 square feet, stainless steel. 6'' diamete...

 Chemetron Scraped Surface Heat Exchanger. Approximately 9 square feet, stainless steel. 6'' diamete...

Stock# 49273001

Used- Chemetron Scraped Surface Heat Exchanger. Approximately 9 square feet, stainless steel. 6'' diameter x 72'' long horizontal chamber. Internal rated 400 psi at 375 deg F, jacket rated 150 psi at 375 deg F. 1 1/2'' tri clamp inlet, 6'' outlet. Driven by a 15 hp, 3/60/220/440 volt, 1770 rpm cone drive, ratio 7.5 to 1. Mounted on a frame. Built 1967

Dia (in): 9 Len (in): 72 Material: Stainless Steel Mfr: Chemetron
VIEW ITEM ADD TO CART
  • Used- Tetra Pak Continuous Ice Cream Freezer.

    Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

    VIEW ITEM Add to Cart
  • Used- Tetra Pak Continuous Ice Cream Freezer.

    Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

    VIEW ITEM Add to Cart
  • Used- Tetra Pak Continuous Ice Cream Freezer.

    Used- Tetra Pak Continuous Ice Cream Freezer. 300 gallons per hour. Can be used with ammonia or freon. 100% over run. CIP capable and ready.

    VIEW ITEM Add to Cart
  • Votator Turba-Film Agitated Thin Film Evaporator, Model 18-072, 316L Stainless Steel. 26 Square fe...

    Used- Votator Turba-Film Agitated Thin Film Evaporator, Model 18-072, 316L Stainless Steel. 26 Square feet heat transfer area. (1) 18" Diameter x 72" long vertical chamber with a 4 point rotor. Internal rated FV at 40 to 400 degrees F. (1) Carbon steel thermal section rated 150 psi at 40 to 400 degrees F. 2 Tri-clamp feed, 10" vapor outlet, 2" tri-clamp bottom outlet. Driven by a 25 hp, 3/60/230/460 volt, 1170 rpm motor. Includes an Industrial Process Equipment 133 square foot vertical shell & tube heat exchanger, Model 1ST10-96. 304 Stainless steel tubes, carbon steel shell, both rated 150 psi at 300 degrees F.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Twin Tube Scrape Surface Heat Exchanger

    Used- Twin Tube Scrape Surface Heat Exchanger, 304 Stainless Steel. Approximate 6 square feet heat transfer surface, (2) 6" diameter x 24" long jacketed tubes. Plastic scraper blades. 3" tri clamp inlet/outlet. Each tube driven by an approximate 5 hp gearmotor. Includes control panel. Mounted on a carbon steel frame.

    VIEW ITEM Add to Cart
  • Used: Stainless Steel Cherry Burrell Votator Scraped Surface Heat Exchanger

    Used: Cherry Burrell Votator Scraped Surface Heat Exchanger, Model 6 x 24, 316 stainless steel. (1) 6" diameter x 24" long jacketed horizontal chamber with (8) blades. Jacket rated 150 psi at 375 degrees F, shell rated 400 psi at 375 degrees F. Driven by a 7-1/2 hp, 3/60/230/460 volt, 1760 rpm XP gear motor. Includes a Waukesha Cherry Burrell positive displacement pump, Model 030U2C, 316 stainless steel, rated .060 gallons per revolution. Driven by a 3 hp, 3/60/230/460 volt, 1755 rpm motor. Unitized on a stainless steel base on casters.

    VIEW ITEM Add to Cart
  • Used- Cherry-Burrell Votator Scraped Surface Heat Exchanger

    Used- Cherry-Burrell Votator Scraped Surface Heat Exchanger, 6 Square Feet, Model 1C648F, Stainless Steel. (1) 6" Diameter x 48" long carbon steel jacket horizontal chamber. Internal rated 400 psi at 375 degrees F, jacket rated 150 psi at 375 degrees F. Top inlet, end outlet. Driven by a 15 hp, 3/60/230/460 volt, 1170 rpm motor. Mounted on a carbon steel frame.

    VIEW ITEM Add to Cart
  • Used- Nickel Votator Triple Tube Scraped Surface Heat Exchanger System

    Used- Votator Triple Tube Scraped Surface Heat Exchanger System, Model SPEC2F80, 27 total square feet, SB161 nickel. (3) approximately 6" diameter x 72" long horizontal chambers. Internal rated 250 psi at 375 degrees F, carbon steel jacket rated 150 psi at 375 degrees F. 1-1/2" Tri-clamp inlet and outlet. Each tube driven by a 7.5 hp motor. Mounted on a common carbon steel frame.

    VIEW ITEM Add to Cart
  • Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

    Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 72" long. Rated 150 psi @ -20 to 400 Degrees F. Includes 40HP DC Drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8017, Serial# 91F0706, Drawing# 12AP457805, built 1991.

    VIEW ITEM Add to Cart
  • Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

    Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 72" long. Includes 40HP DC drive. Rated 150 psi @ -20 to 400 Degrees F. Includes 40HP DC drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8019, built 1991.

    VIEW ITEM Add to Cart
  • Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672

    Used- APV Crepaco Scrape Surface Heat Exchanger, Model HRT/HD/HEXHD 672, 304 Stainless Steel. Approximate 9 square feet. Approximate 6" diameter x 60" long. Rated 150 psi @ -20 to 400 Degrees F. With Drive. Openings: (2) 2" inlets, (2) 2" outlets. National Board# 8021, built 1991. Requires motor.

    VIEW ITEM Add to Cart
  • Chemetron Scraped Surface Heat Exchanger. Approximately 9 square feet, stainless steel. 6'' diamete...

    Used- Chemetron Scraped Surface Heat Exchanger. Approximately 9 square feet, stainless steel. 6'' diameter x 72'' long horizontal chamber. Internal rated 400 psi at 375 deg F, jacket rated 150 psi at 375 deg F. 1 1/2'' tri clamp inlet, 6'' outlet. Driven by a 15 hp, 3/60/220/440 volt, 1770 rpm cone drive, ratio 7.5 to 1. Mounted on a frame. Built 1967

    VIEW ITEM Add to Cart
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200