hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Used Rotary Tray Dryers

6 Rotary Tray Dryers

Enter to Search

Wyssmont Turbo Tray Dryer, Model O-16. Stainless steel construction. Dust collector sized for a des...

Stock# 10749096

Used- Wyssmont Turbo Tray Dryer, Model O-16. Stainless steel construction. Dust collector sized for a design maximum air flow of ~2,400 acfm at 150 F. with chilled water heat exchanger to de-humidify air, steam heated exchanger to heat air, forced draft fan, multi-screw feeder, stainless steel duct work, baghouse, draft fan, rot more info...

Wyssmont Turbo Tray Dryer, Model N-28. 316 S/S, (28) - 78" diameter trays. Includes steam coils and...

Stock# 13705038

Used- Wyssmont Turbo Tray Dryer, Model N-28. 316 S/S, (28) - 78" diameter trays. Includes steam coils and blower. Requires gearbox (not for use on edible products).

Used- Stainless Steel Wyssmont Turbo-Dryer, Model K10

Stock# 42718001

Used- Wyssmont Turbo-Dryer, Model K10, 304 Stainless Steel. Electrically heated. Approximate 48 diameter x 60 tall. (10) Rows of 8 wide trays with stationary wipers. Approximate capacity from 25 to 200 pounds an hour. Driven by a 1-1/2 hp, 90 volt, 1800 rpm XP DC motor with reducer. Includes a top feed chute with a Pulva Feeder, more info...

Used- Wyssmont Style Rotary Tray Dryer, 304 Stainless Steel.

Stock# 47515004

Used- Wyssmont Style Rotary Tray Dryer, 304 Stainless Steel. Approximate 32" diameter x 32" tall chamber. (7) Rows of 10" wide trays with stationary wipers. Driven by a 3/8hp, 3/60/230 volt gear motor, ratio 120 to 1. 3" Top feed, off center bottom outlet. Includes (1) Xchanger C series heat exchanger, model C-175-6, (1) (1) Xch more info...

Used-Babcock tray dryer Type 3-2000

Stock# 64468

Used- Babcock Tray Dryer, Type 3-2000. 316 stainless steel construction. (3) 78" diameter (2000 mm) trays. Inside rated for 90 psi (6 bar) at 311 deg F (115 deg C). On 4 legs. Heat exchanger mounted on side.

Used- Wyssmont Model Turbo-Dryer Model N-25-28

Stock# 47651002

Used- Wyssmont Turbo-Dryer, Model N-25-28, 304 Stainless Steel. Wet feed at 70 degrees F. 675 pounds per hour, dry feed 171 pounds per hour. Entrainer flow to drying zone 7,359 ACFM at 310 degrees F., heat consumption 1,293,240 BTU/hour, (1487 pounds/hour), exhaust 6,674 ACFM at 220 degrees F., dryer temperature 220 degree F. on more info...

Wyssmont Turbo Tray Dryer, Model O-16. Stainless steel construction. Dust collector sized for a des...

 Wyssmont Turbo Tray Dryer, Model O-16. Stainless steel construction. Dust collector sized for a des...

Stock# 10749096

Used- Wyssmont Turbo Tray Dryer, Model O-16. Stainless steel construction. Dust collector sized for a design maximum air flow of ~2,400 acfm at 150 F. with chilled water heat exchanger to de-humidify air, steam heated exchanger to heat air, forced draft fan, multi-screw feeder, stainless steel duct work, baghouse, draft fan, rotary airlock discharge, air conveyor discharge chute, etc. Reported to be reconditioned.

Dia (in): Shelves: Material: Stainless Steel Mfr: Wyssmont
VIEW ITEM ADD TO CART

Wyssmont Turbo Tray Dryer, Model N-28. 316 S/S, (28) - 78" diameter trays. Includes steam coils and...

 Wyssmont Turbo Tray Dryer, Model N-28. 316 S/S, (28) - 78" diameter trays. Includes steam coils and...

Stock# 13705038

Used- Wyssmont Turbo Tray Dryer, Model N-28. 316 S/S, (28) - 78" diameter trays. Includes steam coils and blower. Requires gearbox (not for use on edible products).

Dia (in): Shelves: Material: Mfr: Wyssmont
VIEW ITEM ADD TO CART

Used- Stainless Steel Wyssmont Turbo-Dryer, Model K10

Used- Stainless Steel Wyssmont Turbo-Dryer, Model K10

Stock# 42718001

Used- Wyssmont Turbo-Dryer, Model K10, 304 Stainless Steel. Electrically heated. Approximate 48 diameter x 60 tall. (10) Rows of 8 wide trays with stationary wipers. Approximate capacity from 25 to 200 pounds an hour. Driven by a 1-1/2 hp, 90 volt, 1800 rpm XP DC motor with reducer. Includes a top feed chute with a Pulva Feeder, 26 diameter x 16 high, driven by a 3/4 hp, 3/60/230/460 volt, 1750 rpm motor with reducer, serial# 9837. Bottom discharge with a 1/3 hp rotary valve, (1) heat chamber with blower, (1) cyclone with blower, and (1) control panel with chart recorder.

Dia (in): 4 Shelves: 10 Material: 304 Stainless Steel Mfr: Wyssmont
VIEW ITEM ADD TO CART

Used- Wyssmont Style Rotary Tray Dryer, 304 Stainless Steel.

Used- Wyssmont Style Rotary Tray Dryer, 304 Stainless Steel.

Stock# 47515004

Used- Wyssmont Style Rotary Tray Dryer, 304 Stainless Steel. Approximate 32" diameter x 32" tall chamber. (7) Rows of 10" wide trays with stationary wipers. Driven by a 3/8hp, 3/60/230 volt gear motor, ratio 120 to 1. 3" Top feed, off center bottom outlet. Includes (1) Xchanger C series heat exchanger, model C-175-6, (1) (1) Xchanger TV series heat exchanger, model TV-100-3, (1) Sprout Waldron #1 stainless steel blower, driven by a 7.5hp, 3/60/230/460 volt, 1750 rpm motor. Dryer mounted on a stainless steel frame. No manufacturers tag.

Dia (in): 32 Shelves: 7 Material: 304SS Mfr: Wyssmont
VIEW ITEM ADD TO CART

Used-Babcock tray dryer Type 3-2000

Used-Babcock tray dryer Type 3-2000

Stock# 64468

Used- Babcock Tray Dryer, Type 3-2000. 316 stainless steel construction. (3) 78" diameter (2000 mm) trays. Inside rated for 90 psi (6 bar) at 311 deg F (115 deg C). On 4 legs. Heat exchanger mounted on side.

Dia (in): 78 Shelves: 3 Material: 316 Stainless Steel Mfr: Babcock & Wilcox
VIEW ITEM ADD TO CART

Used- Wyssmont Model Turbo-Dryer Model N-25-28

Used- Wyssmont Model Turbo-Dryer Model N-25-28

Stock# 47651002

Used- Wyssmont Turbo-Dryer, Model N-25-28, 304 Stainless Steel. Wet feed at 70 degrees F. 675 pounds per hour, dry feed 171 pounds per hour. Entrainer flow to drying zone 7,359 ACFM at 310 degrees F., heat consumption 1,293,240 BTU/hour, (1487 pounds/hour), exhaust 6,674 ACFM at 220 degrees F., dryer temperature 220 degree F. on top, 280 degree F. on bottom. Unit approximate 114" diameter x 16 tall. (13) PTFF coated 22" wide x 2" tall lip x 4-7/8" spaced top trays with adjustable wipers, (12) 22" Wide x 1-1/2" tall lip x 4-7/8" spaced bottom trays with adjustable wipers, driven by a 1/2hp motor. Top inlet with a Wyssmont Multi-screw feeder, model MSF-1554-173, (2) 6" diameter x approximate 80" long screws. (1) Turbo fan assembly driven by a 1hp gear motor. Off center bottom discharge with a rotary valve, driven by a 1/2hp gear motor. Dryer mounts on a 33" tall stainless steel frame, serial# J-470, built 1995. Includes a Condenser solvent receiver, approximate 1635 square feet condenser, Wyssmont steam heater, Sly model SBR-1011-8 stainless steel dust collector, approximate 1320 square feet filter area, 20hp exhaust fan, 40hp recirculation fan, approximate 10-1/2" wide pleated plastic belt conveyor, and control panels.

Dia (in): 114 Shelves: 25 Material: 304SS Mfr: Wyssmont
VIEW ITEM ADD TO CART
  • Wyssmont Turbo Tray Dryer, Model O-16. Stainless steel construction. Dust collector sized for a des...

    Used- Wyssmont Turbo Tray Dryer, Model O-16. Stainless steel construction. Dust collector sized for a design maximum air flow of ~2,400 acfm at 150 F. with chilled water heat exchanger to de-humidify air, steam heated exchanger to heat air, forced draft fan, multi-screw feeder, stainless steel duct work, baghouse, draft fan, rotary airlock discharge, air conveyor discharge chute, etc. Reported to be reconditioned.

    VIEW ITEM Add to Cart
  • Wyssmont Turbo Tray Dryer, Model N-28. 316 S/S, (28) - 78" diameter trays. Includes steam coils and...

    Used- Wyssmont Turbo Tray Dryer, Model N-28. 316 S/S, (28) - 78" diameter trays. Includes steam coils and blower. Requires gearbox (not for use on edible products).

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Wyssmont Turbo-Dryer, Model K10

    Used- Wyssmont Turbo-Dryer, Model K10, 304 Stainless Steel. Electrically heated. Approximate 48 diameter x 60 tall. (10) Rows of 8 wide trays with stationary wipers. Approximate capacity from 25 to 200 pounds an hour. Driven by a 1-1/2 hp, 90 volt, 1800 rpm XP DC motor with reducer. Includes a top feed chute with a Pulva Feeder, 26 diameter x 16 high, driven by a 3/4 hp, 3/60/230/460 volt, 1750 rpm motor with reducer, serial# 9837. Bottom discharge with a 1/3 hp rotary valve, (1) heat chamber with blower, (1) cyclone with blower, and (1) control panel with chart recorder.

    VIEW ITEM Add to Cart
  • Used- Wyssmont Style Rotary Tray Dryer, 304 Stainless Steel.

    Used- Wyssmont Style Rotary Tray Dryer, 304 Stainless Steel. Approximate 32" diameter x 32" tall chamber. (7) Rows of 10" wide trays with stationary wipers. Driven by a 3/8hp, 3/60/230 volt gear motor, ratio 120 to 1. 3" Top feed, off center bottom outlet. Includes (1) Xchanger C series heat exchanger, model C-175-6, (1) (1) Xchanger TV series heat exchanger, model TV-100-3, (1) Sprout Waldron #1 stainless steel blower, driven by a 7.5hp, 3/60/230/460 volt, 1750 rpm motor. Dryer mounted on a stainless steel frame. No manufacturers tag.

    VIEW ITEM Add to Cart
  • Used-Babcock tray dryer Type 3-2000

    Used- Babcock Tray Dryer, Type 3-2000. 316 stainless steel construction. (3) 78" diameter (2000 mm) trays. Inside rated for 90 psi (6 bar) at 311 deg F (115 deg C). On 4 legs. Heat exchanger mounted on side.

    VIEW ITEM Add to Cart
  • Used- Wyssmont Model Turbo-Dryer Model N-25-28

    Used- Wyssmont Turbo-Dryer, Model N-25-28, 304 Stainless Steel. Wet feed at 70 degrees F. 675 pounds per hour, dry feed 171 pounds per hour. Entrainer flow to drying zone 7,359 ACFM at 310 degrees F., heat consumption 1,293,240 BTU/hour, (1487 pounds/hour), exhaust 6,674 ACFM at 220 degrees F., dryer temperature 220 degree F. on top, 280 degree F. on bottom. Unit approximate 114" diameter x 16 tall. (13) PTFF coated 22" wide x 2" tall lip x 4-7/8" spaced top trays with adjustable wipers, (12) 22" Wide x 1-1/2" tall lip x 4-7/8" spaced bottom trays with adjustable wipers, driven by a 1/2hp motor. Top inlet with a Wyssmont Multi-screw feeder, model MSF-1554-173, (2) 6" diameter x approximate 80" long screws. (1) Turbo fan assembly driven by a 1hp gear motor. Off center bottom discharge with a rotary valve, driven by a 1/2hp gear motor. Dryer mounts on a 33" tall stainless steel frame, serial# J-470, built 1995. Includes a Condenser solvent receiver, approximate 1635 square feet condenser, Wyssmont steam heater, Sly model SBR-1011-8 stainless steel dust collector, approximate 1320 square feet filter area, 20hp exhaust fan, 40hp recirculation fan, approximate 10-1/2" wide pleated plastic belt conveyor, and control panels.

    VIEW ITEM Add to Cart
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200