Centrifuges

Used-Tema 400 Solid Bowl Overhung Decanter Centrifuge, Model TS-400-F. 30 hp drive motor, 460V, 3 ph, 60 hz, 316L stainless steel wetted parts, 304 stainless steel drive housing. Self-contained lubrication system with external pump and filter, carbon steel baseplate and guard, epoxy painted, manufactured 2002. Comes with spare high tolerance scroll with flights machined to within 0.015" of bowl inner wall for maximum separation efficiency. Reported to be reconditioned. more info...

• Diameter (in.):  
• Length (in.):  
• Model: TS-400-F
• Manufacturer: Tema

Unused-Tema 210 Solid Bowl Decanter Centrifuge, Model TS-210-F. Material of construction is 316 stainless steel, wet end, 7.5 hp drive motor, 480V, 3 ph, 60 hz, self-contained lubrication system with external filter and pump, feed capacity 11 gpm. more info...

• Diameter (in.):  
• Length (in.):  
• Model: TS-210F
• Manufacturer: Tema

Used-Vulcan Liguifue Sludge Thickener, Model LFST-366. Flow rate 100 gpm, feed solids concentration 0.5% - 1.5%, thickened solids concentration 5.0% - 7.0%, solids capture rate 98%, polymer usage type 5 - 7 lb active polymer/dry ton, screen opening size 0.020". Also includes the following equipment: (2) Goulds sludge pumps, Svenmix mixer, (2) Moyno sludge pumps, Nord reducer, (2) Princo flanges, EMCO Polymar feed system, (2) Goulds feed pumps, Clow Kennedy gate valve, more info...

• Diameter (in.):  
• Length (in.):  
• Model: LFST-366
• Manufacturer: Vulcan

Used-Tema 140 Solid Bowl Decanter Centrifuge. Mechanical solids liquid separation, model TS-140-F, 316 Ti stainless steel, wet end, 5 hp drive motor, Group D TEFC motor. Feed capacity 4.4 gpm. Drive motor 5 hp. Manufactured 1999. more info...

• Diameter (in.):  
• Length (in.):  
• Model: TS-140-F
• Manufacturer: Tema

Used-Sludge Dewatering Unit built in 2008 inside a CSC certified 30' container, with flow controlled cavity pumps, discharge conveyors, polymer unit and control panel with touch screen. Decanter Hiller DDF 45 (Deca Drill Fluid), hydraulic differential speed up to 35 rpm. Feed rate 883 cubic feet/hour (25m3/h), solids load 3.3 - 6.6 tons/hour (3 - 6 metric tons/hour).Ran for less than 1000 hours. more info...

• Diameter (in.):  
• Length (in.):  
• Model:  
• Manufacturer:  

Used- Veronesi MDA 700 Solid Bowl Decanter Centrifuge. Carbon steel construction on product contact parts. Maximum bowl speed 4600 rpm, 2 phase, 1.17” (30 mm) single lead conveyor, base, casing, gearbox, feed pipe, fiberglass top cover, 15 kw (approximately 22.5 hp) 380/50/3 exp drive motor. Mounted on a carbon steel stand. more info...

• Diameter (in.):  
• Length (in.):  
• Model: MDA700
• Manufacturer: Veronesi

Used-Hysep MD 44 C2 Sludge Dewatering Decanter, 3600 rpm bowl speed, capacity 308.6 lbs (140 kg) dry solids per hour, 220/380 volt, 34.5/20 amp, 13.3 hp/10 kW, 50 hz, 1430 rpm, with manual. more info...

• Diameter (in.):  
• Length (in.):  
• Model: MD 44 C2
• Manufacturer: Hysep

Used- Flottweg Sorticanter K4D/444 with control panel. Specifically designed for the plastics recycling industry, but materials other than plastics can also be separated. Some of these materials can be heavier than the liquid phase and others lighter (e.g. the contents of the fat separators can be separated into fat, water and solid impurities). It is able to separate two plastics of different densities in a carrier medium such as water. Sorticanter to be adjusted quickly more info...

• Diameter (in.):  
• Length (in.):  
• Model: K4D/444
• Manufacturer: Flottweg

Used-Alfa Laval AVNX-716B-31G decanter centrifuge, stainless steel (product contact areas). Bowl diameter 13.9“/7.5” (353/190 mm), maximum bowl speed 4000 rpm. 20HP/15kW main drive, 380V/3/50Hz. more info...

• Diameter (in.):  
• Length (in.):  
• Model: AVNX 716B-31G
• Manufacturer: Alfa Laval

Used- Sulzer Escher Wyss ZDC-30 Decanter Centrifuge, Type ZDC-30, Hastelloy S on product contact parts. Gas tight design. Casing No 2 purge seals with meter. 12.3" diameter x 35.1" straight side (315mm x 900mm) bowl. 4" pitch, hardfaced cake flingers, flush port. Bowl speed 2000-4500 rpm by a 15 kW, 3/40/380 volt, 1450-2900 rpm, variable speed motor. Complete with gearbox, casing, lube system and frame. more info...

• Diameter (in.): 12.3
• Length (in.): 35.1
• Model: ZDC-30
• Manufacturer: Sulzer Escher Wyss

Used- Sulzer Escher Wyss ZDC-30 Decanter Centrifuge, Type ZDC-30, Hastelloy S on product contact parts. Gas tight design. Casing No 2 purge seals with meter. 12.3" diameter x 35.1" straight side (315mm x 900mm) bowl. 4" pitch, hardfaced cake flingers, flush port. Bowl speed 2000-4500 rpm by a 15 kW, 3/40/380 volt, 1450-2900 rpm, variable speed motor. Complete with gearbox, casing, lube system and frame. more info...

• Diameter (in.): 12.3
• Length (in.): 35.1
• Model: ZDC-30
• Manufacturer: Sulzer Escher Wyss

Used-Humbolt S1-11 Solid Bowl Decanter Centrifuge. Bowl material of construction H1 stainless steel, max bowl speed 3100 rpm, bowl diameter 350 mm, grease lubrication system, 30 hp drive motor, base, casing, 10 hp Roto-Dif backdrive. Reported to be reconditioned with less than 500 hours use. more info...

• Diameter (in.): 13.7
• Length (in.): 34.7
• Model: S1-11
• Manufacturer: Humbolt

Used-Alfa Laval LYNX-20 Decanter Centrifuge. Maximum bowl speed 4000 rpm, single lead conveyor, gearbox, base, casing, 33 kW drive motor. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: LYNX-20
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-418 Solid Bowl Decanter Centrifuge, 316 stainless steel (product contact areas). Max bowl speed 4000 rpm, base, bowl diameter 13.9" (353 mm), length 57.5" (1460 mm), casing feed pipe, 3.5 kNm gearbox, 49.3 hp/37 kW main drive motor 380/3/50. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: AVNX-418
• Manufacturer: Alfa Laval

Used-Humboldt Wedag S1-1 KDH Decanter Centrifuge. 316 Ti on product contact parts, bowl speed 3400 rpm, bowl diameter 13.8" (350 mm), bowl thickness 0.4" (10 mm). Solid capacity 1.5 kg/dm 3. 14.7 Hp/11 kW drive, 50 hz. Acid resistant bowl. more info...

• Diameter (in.): 13.8
• Length (in.):  
• Model: S1-1
• Manufacturer: Humboldt Wedag

Used-Alfa Laval AVNX-620B-31G Solid Bowl Decanter Centrifuge. Stainless steel construction on product contact areas. Maximum bowl speed 4000 rpm, single row of lined cake discharge ports, moon liquid plate dams, gearbox, base, casing and frame. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: 620
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX4030 Solid Bowl Decanter Centrifuge. Max bowl speed 4000 rpm, 316 stainless steel construction on product contact areas, single row of solids discharge ports, single lead conveyor, casing with base, motor, gearbox. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: AVNX-4030
• Manufacturer: Alfa Laval

USED: Alfa Laval MRNX-414-31G-8820.1419-02 Solid Bowl Decanter Centrifuge. 316 stainless steel construction (product contact areas), max bowl speed 3570 rpm, single lead conveyor with welded hardfacing, double row (non-lined) cake discharge ports, base, casing with CIP spray header and flush nozzles, gearbox, feed pipe, vibration isolators, 22 kw main drive motor (380/50/3), back drive, safety guard, mounted on approximate 3' stand. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: MRNX-414B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-420B-31G Solid Bowl Decanter Centrifuge. Stainless steel construction (product contact areas), single row of lined cake discharge ports, base, casing, gearbox. Inline drive configuration, 30 kw drive motor, backdrive, safety guards, mounted on unitized base. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: AVNX-420B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval NX 414B-31G Solid Bowl Decanter Centrifuge. Stainless steel construction on product contact areas, maximum bowl speed 3200 rpm, gearbox, base, casing, feed pipe inline main drive, mounted on 4 legs. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: NX-414B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval DMNX-418B-31G Solid Bowl Decanter Centrifuge. Bowl speed 4000 rpm, single lead conveyor, double row of lined cake discharge ports, liquid plate dams, casing, gearbox, 37 kW drive (690/3/50). more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: DMNX-418B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval DMNX-418B-31G Solid Bowl Decanter Centrifuge. Bowl speed 4000 rpm, single lead conveyor, double row of lined cake discharge ports, liquid plate dams, casing, gearbox, 37 kW drive (690/3/50). more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: DMNX-418B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval Decanter, type AVNX720 - as new - only 700 hours in operation. Complete sludge dewatering decanter with hydraulic back drive. Capacity approximately 150 kg (330 pounds) dry solids/hour, including steering panel, etc; 18 kW (24 hp) hydraulic motor. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: AVNX-720B-31G
• Manufacturer: Alfa Laval

Used- Alfa Laval NX-418 Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas), 4000 bowl rpm, 110 mm single lead conveyor with welded hard facing, double row of lined cake discharge ports, moon liquid dam plates, gearbox with torque arm assembly, base, casing, feed tube. 50hp,3/60/230/460 volt, 1750 rpm main drive motor, 7.5 hp back drive. Mounted on a carbon steel frame. Includes a control panel. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: NX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval Foodec 300 Sold Bowl Decanter Centrifuge. Stainless steel construction, max bowl speed 4000 rpm, base, casing, gearbox, feed pipe, vibration isolators, safety guards, 30 kW main motor, 5.5 kW backdrive, control panel with variable frequency drive, mounted on stand. more info...

• Diameter (in.): 13.8
• Length (in.): 57.1
• Model: Foodec 300
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-418 Sold Bowl Decanter Centrifuge. 316 Stainless steel (product contact areas), max bowl speed 3250 rpm, base, casing, feed pipe, gearbox, safety guards, 30 kW main drive motor 380/3/50, backdrive, DSC auger drive controller, mounted on stand. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: AVNX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval NX-418 Solid Bowl Decanter Centrifuge, stainless steel construction (product contact areas), max bowl speed 4000 rpm, single lead conveyor, lined solids discharge ports, liquid plate dams, gearbox, base, casing. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: NX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval Decanter Centrifuge, Model AVNX 718B-31G, manufactured 1988.Previously used in wastewater treatment application. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: AVNX -718B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval CFNX-414-B310-8820-1424-0 Solid Bowl Decanter Centrifuge, 316L stainless steel (on product contact parts). Max bowl speed 4000 rpm, double row of cake discharge ports (one row presently has plugs), base, casing. Unit is reported to have been reconditioned. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: CFNX-414
• Manufacturer: Alfa Laval

Used- Alfa Laval CFNX-414B-31G Solid Bowl Decanter Centrifuge, 316 stainless steel construction (product contact areas), max bowl speed 4000 rpm, 110 mm single lead conveyor, double row of cake solid discharge ports, gearbox, base, casing, in-line design 18.5 kw drive motor, feed pipe, cip motor, 4 kw backdrive motor, safety guards, mounted on approximate 3' stand. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: CHNX-414
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-314B-31 Sold Bowl Decanter Centrifuge. 316 Stainless steel (on product contact parts), max bowl speed 4000 rpm, 70 mm conveyor with hardfacing, double row of lined cake solid discharge ports, base, casing, with cake vibrator, 2.5 kNm gearbox, feed pipe, safety guards, 25 hp/18.5 kW main drive, 5.3 hp/4 kW backdrive, 220V/3/60. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: AVNX-314B-31
• Manufacturer: Alfa Laval

Used-Unused-Alfa Laval NX-418B-31 Solid Bowl Decanter Centrifuge, 316 stainless steel construction (product contact areas), maximum bowl speed 3250 rpm, single row of lined cake discharge ports, 110 mm single lead conveyor, gearbox, moon liquid plate dams, base, casing, 45 hp/30 kW main drive motor, 6 hp/4 kW back drive, feed pipe, safety guards. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: NX-418B-31
• Manufacturer: Alfa Laval

Used- Alfa Laval UVNX-418B-31 Solid Bowl Decanter Centrifuge, 316 Stainless Steel (product contact areas). Maximum bowl speed 3250 rpm, 70mm single lead conveyor, single row lined cake discharge ports, base, casing, dam liquid discharge, missing motor. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: UVNX-418B-31
• Manufacturer: Alfa Laval

Used- Alfa Laval NX-314B-31G Solid Bowl Decanter Centrifuge, 316 stainless steel construction (product contact areas), single lead conveyor, single row on lined cake solids discharge ports, base, casing, 2,5 kN gearbox and overload trip arm, safety guard, ASEA 15 hp/11 kW 50hZ drive motor, mounted on approx: 3' stand, includes spare bowl (double row lined cake ports), 110 mm single lead "esjberg" conveyor. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: NX-314B-31G
• Manufacturer: Alfa Laval

Used-Mobile Wastewater Dewatering Plant in 30' container consisting of:(1) Alfa Laval DSNX-4250 solid bowl decanter centrifuge, type 316 stainless steel construction on product contact part. Complete with gearbox with hydraulic back drive, including safety guard, casing and frame, various pumps, (1) control panel and (1) solid discharge screw conveyor. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: DSNX-4250
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-418 Sold Bowl Decanter Centrifuge. 316 Stainless steel (product contact areas), max bowl speed 3250 rpm, base, casing feed pipe, gearbox, 30 kW main drive motor 380/3/50, backdrive. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: AVNX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-414B-11 Solid Bowl Decanter Centrifuge.Stainless steel construction (product contact areas), single row of lined cake discharge ports, base, casing, 18.5 kw main drive motor, gearbox 2.5 KNm, 4 kW backdrive, safety guards, mounted on stand. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: AVNX-414B-11
• Manufacturer: Alfa Laval

Used-Alfa Laval DMNX-418 Solid Bowl Decanter Centrifuge Skid. Stainless steel construction (product contact areas), base casing, gearbox, 40 hp XP maindrive motor with fluid clutch, 15 hp XP backdrive, vibration switch, explosion proof control panel, skid mounted. Power requirements 100 amp, 468/3/60. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: DMNX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval DMNX-418 Solid Bowl Decanter Centrifuge Skid. Stainless steel construction (product contact areas), base casing, gearbox, 40 hp XP maindrive motor with fluid clutch, 15 hp XP backdrive, vibration switch, explosion proof control panel, skid mounted. Power requirements 100 amp, 468/3/60. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: DMNX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval DMNX-418 Solid Bowl Decanter Centrifuge Skid. Stainless steel construction (product contact areas), base casing, gearbox, 40 hp XP maindrive motor with fluid clutch, 15 hp XP backdrive, vibration switch, explosion proof control panel, skid mounted. Power requirements 100 amp, 468/3/60. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: DMNX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval NX-314B-31G Solid Bowl Decanter Centrifuge, stainless steel construction (product contact areas), max bowl speed 3250 rpm, double row of lined cake discharge ports, liquid plate dams, base, casing, gearbox, (no drive motor). more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: NX-314B
• Manufacturer: Alfa- Laval

Used-Alfa Laval AVNX-420B-31G Solid Bowl Decanter Centrifuge, stainless steel (product contact area), max bowl speed 4000 rpm, base, casing, liquid plate dams, gearbox, 22 kW drive, hydraulic backdive driven by bowl assembly. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: AVNX-420B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval DMNX-418 Solid Bowl Decanter Centrifuge Skid. Stainless steel construction (product contact areas), base casing, gearbox, 40 hp XP maindrive motor with fluid clutch, 15 hp XP backdrive, vibration switch, explosion proof control panel, skid mounted. Power requirements 100 amp, 468/3/60. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: DMNX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval NX-418 Solid Bowl Decanter Centrifuge, stainless steel (product contact areas), double row of lined cake discharge ports, 70 mm single lead conveyor, cake vibrator, 15 kW drive motor (50 hz), 2.5 Nm (250 kpm) gear with Gs coupling. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: NX-418
• Manufacturer: Alfa Laval

Used- Alfa Laval AVNX-714B-31G Solid Bowl Decanter Centrifuge, 316 stainless steel construction (product contact areas), maximum bowl speed 4000 rpm, single lead conveyor, solid discharge ports with discharge racetrack, moon liquid plate dams, gearbox, casing, feed pipe, 15 kWmain drive motor 380/3/50. Safety guards, mounted on 4 leg stand. more info...

• Diameter (in.): 13.8
• Length (in.): 34
• Model: AVNX-714B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval NX-418 Solid Bowl Decanter Centrifuge, stainless steel (product contact areas), double row of lined cake discharge ports, 70 mm single lead conveyor, cake vibrator, 15 kW drive motor (50 hz), 3.5 Nm (350 kpm) gear with Gs coupling. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: NX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval DMNX-418 Solid Bowl Decanter Centrifuge Skid. Stainless steel construction (product contact areas), base casing, gearbox, 40 hp XP maindrive motor with fluid clutch, 15 hp XP backdrive, vibration switch, explosion proof control panel, skid mounted. Power requirements 100 amp, 468/3/60. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: DMNX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval UVNX-418B-11G-8820-5001-10 Solid Bowl Decanter Centrifuge, 316 stainless steel (product contact areas). Max bowl speed 3250 rpm, single row of lined cake discharge ports, single lead conveyor, base, casing, frame, feed pipe, gearbox, main drive motor 380/3/50, back drive. On 4 legs. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: UNVX-418B-11G
• Manufacturer: Alfa Laval

Used- Alfa Laval NX-418 (2 or 3 phase) Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas), maximum bowl speed 3250 rpm, single row of lined cake discharge ports, 70 mm single lead conveyor, 2.5 gearbox, Open design liquid discharge (ring dam), base, casing. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: NX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval BRNX-418S-31G Solid Bowl Decanter Centrifuge, stainless steel construction (product contact areas). Max bowl speed 4000 rpm, base, casing, gearbox, centripetal pump liquid discharge, feed pipe, main motor 37 kW, 5.5 kW fixed speed backdrive motor. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: BRNX-418S-31G
• Manufacturer: Alfa Laval

Used- Alfa Laval UVNX-418 Solid Bowl Decanter Centrifuge. 316 Stainless steel (product contact areas). Approximate 70mm single lead conveyor, 2 or 3 phase machine, maximum bowl speed 3250 rpm, regulator tubes, base, bowl diameter 13.9" (353 mm), length 57.5" (1460 mm), casing, frame, feed pipe, gearbox, 45 hp/30 kW main drive motor 380/3/50. Mounted on a carbon steel frame. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: UNVX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval AXNV-420-B-31G Solid Bowl Decanter Centrifuge. 316 Stainless steel (product contact areas), max bowl speed 4000 rpm, base, casing, feed pipe, 22 kW direct drive motor, hydraulic backdrive. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: AVNX-420B-31G
• Manufacturer: Alfa Laval

Used- Alfa Laval UVNX-418 (2 or 3 phase) Solid Bowl Decanter Centrifuge. 316 Stainless steel (product contact areas). single lead conveyor, single row of lined cake discharge ports, cake discharge cage for de-lumping, unit currently set with 3 phase (liquid/liquid/solids separation) regulator tubes configuration and with the addition of screwing in bowl plugs unit can be operated in in 2 phase (liquid/solid separation), maximum bowl speed 3250 rpm, casing, frame, feed pipe, more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: UVNX-314B-11G
• Manufacturer: Alfa Laval

Used- Alfa Laval MRNX-418 Sanitary (2 or 3-Phase) Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas), 4000 bowl rpm, polished 70 mm single lead conveyor, single row of lined cake discharge ports, unit presently set for three phase operation and with the addition of the screw-in plugs unit can be used in 2 phase operation, centripetal pump liquid discharge, base, casing with CIP flush header and nozzles, gearbox, feed tube, 40 hp (3/60/230/460) more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: MRNX-418B-31
• Manufacturer: Alfa Laval

Used- Alfa Laval NX-418 (2 or 3 phase) Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas), maximum bowl speed 4000 rpm, single row of lined cake discharge ports, 70 mm single lead conveyor, 2.5 gearbox, Open design liquid discharge (ring dam), base, casing. more info...

• Diameter (in.): 13.8
• Length (in.): 57.4
• Model: NX-418
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-720B-31G Solid Bowl Decanter Centrifuge. Bowl speed 4000 rpm, single lead conveyor with 4.33” (110 mm) pitch, casing, gearbox, 18.5kW drive (660/380/3/50) (22/38A). more info...

• Diameter (in.): 13.9
• Length (in.): 57.48
• Model: 720
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-418B-31 Solid Bowl Decanter Centrifuge, stainless steel on product contact parts. Bowl speed 2700 rpm, single lead conveyor, casing, gearbox, 37 kW/50 hp drive (380/3/50). 4 kW/5.5 hp, backdrive, 380V, 1420 rpm. more info...

• Diameter (in.): 13.9
• Length (in.): 57.48
• Model: 418
• Manufacturer: Alfa Laval

Used- Sharples P-1000 Super-D-Canter Centrifuge, 316 Stainless Steel. 4.25" Double lead conveyor with welded hardfacing, adjustable liquid plate dam, side discharge cake ports, racetrack, auger type cake impeller, 165:1 gearbox, torque arm assembly, base, casing, feed tube, sub-base. Driven by a 30 hp, 3/60/230/460 volt, 1740 rpm motor. Includes a fluid clutch. more info...

• Diameter (in.): 14
• Length (in.): 20
• Model: P-1000
• Manufacturer: Sharples

Used-Hysep DDS MD-43C Sludge Dewatering Decanter. Capacity 308.6 lbs (140 kg) dry solids per hour, EMOD type 200L/4T motor, IP54, 220/380 volt, 34.5/20 amp, 13.3 hp/10 kW, 50 hz, 1430 rpm, equipped with Rotodif Viscotherm hydraulic back drive, with manual. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: MD-43C
• Manufacturer: Hysep

Used- Westfalia CS-365-010 solid bowl decanter centrifuge, 316 stainless steel construction on pruduct contact parts, maximum bowl speed 400 rpm, conveyor, base, gearbox, feed pipe, foundation plate, control panel, 30 Kw (approximately 45 hp) 380/50/3 xp drive motor. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-365-010
• Manufacturer: Westfalia

Used- Westfalia SDA-360 Solid Bowl Decanter Centrifuge, Stainless Steel. Maximum bowl speed 4000 rpm, rated at 80 gpm, open discharge, 15 degree beach, sanitary design. 2" Single lead conveyor, 35:1 cyclo gearbox, equivalent to CA361-000, reconditioned. more info...

• Diameter (in.): 14
• Length (in.): 37
• Model: SDB-360
• Manufacturer: Westfalia

Used-Westfalia CA-366-010 Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts, maximum bowl speed 4000 rpm, casing, feed pipe, sub-base, driven by a 45 hp/30 kW main drive motor 3/50/220/380/2930 rpm. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366
• Manufacturer: Westfalia

Used-Westfalia CA-366-010 Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts, maximum bowl speed 4000 rpm, casing, feed pipe, sub-base, driven by a 45 hp/30 kW main drive motor 3/50/220/380/2930 rpm. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366
• Manufacturer: Westfalia

Used-Westfalia CA-366-010 Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts, maximum bowl speed 4000 rpm, casing, feed pipe, sub-base, driven by a 45 hp/30 kW main drive motor 3/50/220/380/2930 rpm, safety guards. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366
• Manufacturer: Westfalia

Used-Hysep DDS MD-43C Sludge Dewatering Decanter. Capacity 308.6 lbs (140 kg) dry solids per hour, EMOD type 200L/4T motor, IP54, 220/380 volt, 34.5/20 amp, 13.3 hp/10 kW, 50 hz, 1430 rpm, equipped with Rotodif Viscotherm hydraulic back drive, with manual. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: MD-43C
• Manufacturer: Hysep

Used-Westfalia CA-366-010 Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts, maximum bowl speed 4000 rpm, casing, feed pipe, sub-base, driven by a 45 hp/30 kW main drive motor 3/50/220/380/2930 rpm. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366
• Manufacturer: Westfalia

Used-Westfalia CA-366-010 Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts, maximum bowl speed 4000 rpm, casing, feed pipe, sub-base, driven by a 45 hp/30 kW main drive motor 3/50/220/380/2930 rpm, safety guards. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366
• Manufacturer: Westfalia

Used-Westfalia CA-366-010 Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts, maximum bowl speed 4000 rpm, casing, feed pipe, sub-base, driven by a 45 hp/30 kW main drive motor 3/50/220/380/2930 rpm. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366
• Manufacturer: Westfalia

Used- Sharples P-3000 3 Phase Super-D-Canter Centrifuge, 316 Stainless Steel. Maximum bowl speed 4000 rpm, 360 deg cake discharge with carbide liners. 5" single lead conveyor with welded stellite hardsurfacing. No gearbox, no motor, no backdrive, no torque arm, no feed tube, no yoke cap, no guards and no vibration mounts. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

Used-Sharples P-3400 Super-D-Canter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4000 rpm, 4.25" single lead conveyor with welded hardfacing, STC lined feed nozzles, 360 degree solids discharge ports, base, casing, gearbox, feed pipe, 22 kw main drive motor, sub-base, safety guards, mounted on approximate 3' stand. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P-3400
• Manufacturer: Sharples

USED: Sharples P-1000 Super-D-Canter centrifuge, 316 stainless steel, 4.25" double lead conveyor, 16511 gearbox, torque arm, feed pipe, base, casing (stainless steel), racetrack, auger type cake impeller, side cake discharge, racetrack, gearbox guard. more info...

• Diameter (in.): 14
• Length (in.): 20
• Model: P-1000
• Manufacturer: Sharples

Used- Hutchinson Hayes P3000 Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas). 4.25" Single lead conveyor with welded hardfacing, hogged-out cake discharge ports, cake flingers, epicentric liquid plate dams, feed pipe, 52:1 ratio gearbox, base, casing, vibration switch, 50 hp explosion proof (Class I, Group D; Class II, Group E & F) main drive motor with fluid coupling (575 volt), 7.5 hp explosion proof (Class I, Group D; Class II, more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Hutchinson Hayes

USED: Westfalia CA-365-110 solid bowl decanter centrifuge. 316 stainless steel construction (product contact areas), max bowl speed 4000 rpm, 4" double lead conveyor with welded hardfacing, lined cake discharge ports, centripetal pump liquid discharge, 25:1 gearbox, base, casing, feed pipe. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-365
• Manufacturer: Westfalia

USED: Westfalia CA-365-110 solid bowl decanter centrifuge, 316 stainless steel construction (product contact areas). Max bowl speed 4000 rpm, 4" double lead conveyor with welded hardfacing, lined cake discharge ports, centripetal pump liquid discharge, 25:1 gearbox, base, casing, feed pipe, 40 hp main drive motor 460/3/60, hydraulic backdrive. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-365
• Manufacturer: Westfalia

USED: Sharples P4400 Super-D-Canter centrifuge, 316/317 stainless steel on product contact areas. Max bowl speed 4000 rpm, 3" single lead hardsurfaced conveyor, 360 degree solids discharge ports, 125:1 gearbox, casing, spindle housing, 50 hp motor 230/460/3/60/1800 rpm, guards, vibration isolators/switch. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P-4400
• Manufacturer: Sharples

Used- Westfalia CA365-010 Decanter Centrifuge. 316 Stainless Steel Construction on Product Contact Areas. Max bowl speed 4000 RPM. 4" (100 MM) diameter double lead conveyor with welded hardfacing driven by a 45 HP/30 KW, 3/50/220/380 Volt, Loher type A225MA-2G motor. Complete with sub-base and control panel. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-365-010
• Manufacturer: Westfalia

Used- Westfalia CA365-010 Decanter Centrifuge. 316 Stainless Steel Construction On Product Contact Areas. Max bowl speed 4000 RPM. 4" (100 MM) diameter double lead conveyor with welded hardfacing driven by a 45 HP/30 KW, 3/50/220/380 Volt, Loher type A225MA-2G, motor. Complete with sub-base and control panel. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-365-010
• Manufacturer: Westfalia

Used- Westfalia CA366-010 Decanter Centrifuge. 316 Stainless Steel Construction On Product Contact Areas. Max bowl speed 4000 RPM. 4" (100 mm) diameter double lead conveyor with welded hardfacing driven by a 45 HP/30 KW, 3/50/220/380 Volt, motor. Complete with sub-base and control panel. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366-010
• Manufacturer: Westfalia

USED: Westfalia SDB-360 decanter centrifuge. 316 stainless steel construction, single lead conveyor with hardfacing, line cake discharge ports, centripetal pump liquid discharge, gearbox, feed tube, base, casing, drive motor (415/3/50) with sub-base. more info...

• Diameter (in.): 14
• Length (in.): 37
• Model: SDB-360
• Manufacturer: Westfalia

USED: Sharples P-2000 Super-D-Canter centrifuge, 316 stainless steel. Cylinder bowl, slotted discharge ports, 4.25 double lead conveyor, 1,2,3,4 slotted liquid dams, 52:1 gearbox with torque arm assembly, no motor, guards, base, case, sub-base, vibration isolators. more info...

• Diameter (in.): 14
• Length (in.): 20
• Model: P-2000
• Manufacturer: Sharples

USED: Westfalia solid bowl decanter centrifuge, SDB-360, 316 stainless steel, max bowl speed 4000 rpm, 4" single lead conveyor, open liquid discharge ports, feed tube, casing, motor sub-base (no motor) with drive motor sheave, belt guard, lube system. more info...

• Diameter (in.): 14
• Length (in.): 37
• Model: SDB-360
• Manufacturer: Westfalia

USED: Westfalia SDB-360 solid bowl decanter centrifuge, 316 stainless steel. Max bowl speed 4000 rpm, single lead conveyor with hardfacing, lined solid discharge ports, open type liquid discharge, casing, sub-base, gearbox, feed tube. more info...

• Diameter (in.): 14
• Length (in.): 37
• Model: SDB-360
• Manufacturer: Westfalia

USED: Westfalia SDA-360L solid bowl decanter centrifuge. 316 stainless steel construction (product contact areas). Max bowl speed 4000 rpm, 4" double lead conveyor with welded hardfacing, lined cake discharge ports, centripetal pump liquid discharge, 25:1 gearbox, base, casing, feed pipe. more info...

• Diameter (in.): 14
• Length (in.): 37
• Model: SDA-360L
• Manufacturer: Westfalia

Used- Sharples P-3000 Super-D-Canter Centrifuge. 316 Stainless steel construction on product contact areas, contour design bowl assembly, max bowl speed 4000 rpm, 4.25" single lead conveyor with welded hardfacing, hogged out cake discharge ports with replaceable wear liners, cake flingers, 1-2-3-4 slotted liquid plate dam, gearbox with torque arm assembly, base, casing, feed pipe, 25 hp main drive motor (XP), vibration switch, mounted on 6' stand with solid sludge hopper more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

USED: Sharples P-3000 Super-D-Canter centrifuge, 316 stainless steel construction (product contact areas). Max bowl speed 4000 rpm, 4.25" single lead conveyor, 360 deg solid discharge ports with sintered tungsten carbide wear protection liners, cake flingers, solids racetrack, ring type liquid plate dam, 125:1 gearbox with torque arm assembly, base, casing (no feed pipe). more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

Used-Sharples P-3000 Super-D-Canter Centrifuge, stainless steel, motor 25 hp/18.5 kW drive with a max speed of 4000 rpm. Bowl size 15.7" (400 mm) diameter, 34" (870 mm) long. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

Used-Sharples P-2000 Super-D-Canter Centrifuge, stainless steel construction, base, casing, gearbox. (Unit reportedly has new bearing and seals installed.) more info...

• Diameter (in.): 14
• Length (in.): 20
• Model: P-2000
• Manufacturer: Sharples

Used-Sharples P-2000 Super-D-Canter Centrifuge, stainless steel construction, base, casing, gearbox. (Unit reportedly has new bearing and seals installed.) more info...

• Diameter (in.): 14
• Length (in.): 20
• Model: P-2000
• Manufacturer: Sharples

Used-Westfalia CA-366-10 Solid Bowl Decanter Centrifuge. 316Ti stainless steel (1.4571) construction (product contact areas), max bowl speed 4000 rpm, centripetal pump liquid discharge, 30 kW/45 kW drive motor (380/3/50), safety guards. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366-10
• Manufacturer: Westfalia

Used-Noxon DC-20 Solid Bowl Decanter Centrifuge. High strength steel with Wolfram carbide coating, 24.7 hp/18.5 kW screw motor and 29.3 hp/22 kw drum motor. Capacity 528-6606 gallons/h (2-25 m3/h), maximum 1764 lbs (800 kg) dry solid per hour. Hydraulically operated, feed pipe, casing, frame/stand, safety guards. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: DC 20
• Manufacturer: Noxon

Used-Westfalia CA-366-10 Solid Bowl Decanter Centrifuge. 316Ti stainless steel (1.4571) construction (product contact areas), max bowl speed 4000 rpm, centripetal pump liquid discharge, 30 kW/45 kW drive motor (380/3/50), safety guards. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366-10
• Manufacturer: Westfalia

Used-Westfalia CA-366-10 Solid Bowl Decanter Centrifuge. 316Ti stainless steel (1.4571) construction (product contact areas), max bowl speed 4000 rpm, centripetal pump liquid discharge, 30 kW/45 kW drive motor (380/3/50), safety guards. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-366-10
• Manufacturer: Westfalia

Used- Sharples P-1000 Super-D-Canter Centrifuge, 304 Stainless Steel. 4.25" Double lead conveyor with hardfacing, auger style solids discharge port, adjustable carbon steel liquid plates. 52:1 gearbox ratio with torque arm. Base, casing, 30 hp, 3/60/230/460 volt, 1765 rpm motor, safety guards, XP control box. Unit mounted on a common base. more info...

• Diameter (in.): 14
• Length (in.): 20
• Model: P-1000
• Manufacturer: Sharples

Used- Sharples P-3000 Super-D-Canter Centrifuge. 316 stainless steel (product contact areas). Maximum bowl speed 4000 rpm. 3" single lead conveyor, torque arm assembly, epicentric liquid ports. 30 hp main drive, no gearbox. Mounted on a stand. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

Used- Bird HB1400 Solid Bowl Decanter Centrifuge, 316 Stainless Steel. Maximum bowl speed 3100 rpm. 10 deg contour bowl, ceramic lined cake discharge ports, vibration isolators, Eddy current backdrive 15 hp, 230/460 volt. Drive motor is 30 hp, 3/60/230/460 volts. more info...

• Diameter (in.): 14
• Length (in.): 52
• Model: HB-1400
• Manufacturer: Bird

Used- Sharples P-3000C Super-D-Canter Centrifuge, 316 Stainless Steel. Contour bowl, grooved beach, hogged out cake ports, no liners, 3" single lead conveyor, no hardfacing, slotted plate dam, bolts for cake flinger attachment, torque arm assembly with torque arm, 125:1 gearbox, straight through feed tube. Driven by an approximately 10 kw, 50 cycle motor. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000C
• Manufacturer: Sharples

Used-Westfalia CA-365-010 Decanter Centrifuge. 316 stainless steel construction (product contact areas), max bowl speed 4000 rpm, centripetal pump liquid discharge, 40 hp main drive motor 230/460/3/60. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: CA-365
• Manufacturer: Westfalia

Used-Sharples P-3000-NE Super-D-Canter Centrifuge. 316 stainless steel construction on product contact areas, contour design bowl assembly, max bowl speed 4000 rpm, 110 mm (4.25") single lead conveyor, 360 deg cake discharge ports with replaceable wear liners, cake flingers, gearbox with back drive assembly, base, casing, feed pipe, 18.5 kW (25 hp) main drive motor XP. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

Used-Sharples P-3000-NE Super-D-Canter Centrifuge. 316 stainless steel construction on product contact areas, contour design bowl assembly, max bowl speed 4000 rpm, 110 mm (4.25") single lead conveyor, 360 deg cake discharge ports with replaceable wear liners, cake flingers, gearbox with back drive assembly, base, casing, feed pipe, 18.5 kW (25 hp) main drive motor XP. more info...

• Diameter (in.): 14
• Length (in.): 31
• Model: P-3000
• Manufacturer: Sharples

Used-Sharples P3000 decanter bowl with frame and casing. No motor. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P3000
• Manufacturer: Sharples

Used-Dorr Oliver 16L Solid Bowl Decanter Centrifuge, stainless steel construction (product contact areas), max bowl speed 4000 rpm, auger style solids discharge ports, base, liquid/solid discharge chutes. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: 16L
• Manufacturer: Dorr Oliver

Used- Dorr Oliver/Merco 16L Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact area), maximum bowl speed 4000 rpm, 5” double lead conveyor with welded hardfacing, auger style solids discharge, plate dam liquid discharge, base, discharge chutes, bowl cover, 30hp drive motor , ECB backdrive, belt guard. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: 16L
• Manufacturer: Dorr Oliver/Merco

Used-Sharples P3000 decanter bowl with frame and casing. No motor. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P3000
• Manufacturer: Sharples

Used-Sharples P-3400 Super-D-Canter Centrifuge. 316 Stainless steel construction on product contact areas. Max bowl speed 4000 rpm, single lead conveyor. 360 deg cake discharge ports with replaceable wear liners, gearbox with back drive assembly, base, casing, feed pipe. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P3400
• Manufacturer: Sharples

Used-Sharples P-3400 Super-D-Canter Centrifuge. 316 Stainless steel construction (product contact areas), max bowl speed 4000 rpm, single lead conveyor. hogged-out cake discharge ports with replaceable wear liners, gearbox, base, casing, feed pipe. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P-3400
• Manufacturer: Sharples

Used-Dorr Oliver 16L Solid Bowl Decanter Centrifuge, stainless steel construction (product contact areas), max bowl speed 4000 rpm, auger style solids discharge ports, base, liquid/solid discharge chutes. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: 16L
• Manufacturer: Dorr Oliver

Used-Sharples P3000 Deccanter Bowl with Frame & Casing. No Motor more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P3000
• Manufacturer: Sharples

Used- Sharples P-3400 Super-D-Canter Centrifuge. 316 Stainless steel construction (product contact areas), maximum bowl speed 4000 rpm, hogged out cake discharge ports with wear liners, 4.25" single lead conveyor welded hard facing, ring liquid plate, P52 gearbox, drive motor 30kw 380/50/3 w/fluid clutch, back drive motor, base, casing w/stainless steel top cover, feed pipe, safety guards, mounted on a carbon steel frame. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P-3400
• Manufacturer: Sharples

Used-Sharples/Pennwalt P-3000D Super-D-Canter Centrifuge, stainless steel on product contact parts, bowl speed 3250 rpm, base, casing, gearbox, feed pipe. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

Used-Sharples P3000 With Frame & Casing & Gearbox No Motor more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P3000
• Manufacturer: Sharples

Used- Dorr Oliver/Merco 16L Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact area), maximum bowl speed 4000 rpm, 5” double lead conveyor with welded hardfacing, auger style solids discharge, plate dam liquid discharge, base, discharge chutes, bowl cover, 30hp drive motor , ECB backdrive, belt guard. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: 16L
• Manufacturer: Dorr Oliver/Merco

Used-Sharples P3000 complete with motor, casing, gearbox, drive belts and in-feed pipe. Fully refurbished. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P3000
• Manufacturer: Sharples

Used- Dorr Oliver Merco 16L Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact area), maximum bowl speed 4000 rpm, 5” double lead conveyor with welded hardfacing, auger style solids discharge, plate dam liquid discharge, base, discharge chutes, bowl cover, 30hp drive motor , ECB backdrive, belt guard. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: 16L
• Manufacturer: Dorr Oliver/Merco

Used- Dorr Oliver 16L Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas), maximum bowl speed 4000 rpm, 5” double lead conveyor with welded hardfacing, auger design solid discharge ports, adjustable liquid plate dams, coffin design stainless steel casing, cyclo gearbox, base, main drive guard. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: 16L
• Manufacturer: Dorr Oliver

Used-Sharples P-3000 Super-D-Canter Centrifuge, 316 stainless steel (product contact areas), max bowl speed 4000 rpm, single lead conveyor with sintered tungsten carbide wear protection tiles, hogged-out solids discharge ports with replaceable wear liner and cake flingers, epicentric liquid plate dams, base, casing, feed pipe, 11 kW drive motor, 2.2 kW backdrive motor. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

Used-Sharples P-3400 Super-D-Canter Centrifuge. 316 Stainless steel construction on product contact areas. Max bowl speed 4000 rpm, single lead conveyor. 360 deg cake discharge ports with replaceable wear liners, gearbox with back drive assembly, base, casing, feed pipe. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P3400
• Manufacturer: Sharples

Used-Westfalia CA 360-000 Solid Bowl Decanter Centrifuge, stainless steel (product contact areas), bowl speed 3300 rpm, gravity overflow liquid discharge, base/casing. Approximately 30 hp drive motor, sub-base, feed pipe, safety guards, solids 3.0 kg/dm3. more info...

• Diameter (in.): 14
• Length (in.): 37
• Model: CA-360-000
• Manufacturer: Westfalia

Used-Sharples P-3000 Super-D-Canter Centrifuge, 316 stainless steel (product contact areas), max bowl speed 4000 rpm, single lead conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with wear liner, epicentric liquid plate dams, base, casing, feed pipe, main drive motor, backdrive motor, sub-base. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-3000
• Manufacturer: Sharples

Used-Sharples Pennwalt P-30000 Super-D-Canter Centrifuge. 316 Stainless steel (product contact areas), bowl speed 3250 rpm. Base, casing, feed pipe, gearbox, 15 kw drive motor, backdrive, safety guards, mounted on sub-base. more info...

• Diameter (in.): 14
• Length (in.): 30
• Model: P-30000
• Manufacturer: Sharples

Used- Sharples P-3400 Super-D-Canter Centrifuge. 316 Stainless steel construction (product contact areas), maximum bowl speed 4000 rpm, 360 degree cake discharge ports with wear liners, 4.25" single lead conveyor welded hard facing, ring liquid plate, gearbox, drive motor 30kw 380/50/3 w/fluid clutch, back drive motor, base, casing w/stainless steel top cover, feed pipe, safety guards, mounted on a carbon steel frame. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P-3400
• Manufacturer: Sharples

Used-Sharples P-3400 Super-D-Canter Centrifuge, 316 stainless steel construction on product contact parts. Maximum bowl speed 3250 rpm, hogged-out cake discharge ports with wear liners; 4.25" single lead conveyor welded hard facing; 1, 2, 3, 4 slotted liquid plate dams; 125:1 gearbox; drive motor 30 hp, 3/60/380/1750, 7.4 hp (5.5 kW) back drive motor, base casing, mounted on a steel frame; control panel with frequency converter for the main motor; back drive ECB with ABC. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P-3400
• Manufacturer: Sharples

Used-Dorr Oliver 16L Solid Bowl Decanter Centrifuge, stainless steel construction (product contact areas), max bowl speed 4000 rpm, auger style solids discharge ports, base, liquid/solid discharge chutes. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: 16L
• Manufacturer: Dorr Oliver

Used-Sharples P-4400 Vertical Super-D-Canter Centrifuge, stainless steel construction. Bowl speed 3600 rpm, 73 hp/55 kW, 50 hz motor with reducer. Maximum pressure 0.1 Mpa, maximum sludge density 2.1 kg/m3. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: P-4400
• Manufacturer: Sharples

Used-Dorr Oliver 16L Solid Bowl Decanter Centrifuge, stainless steel construction (product contact areas), max bowl speed 4000 rpm, auger style solids discharge ports, base, liquid/solid discharge chutes. more info...

• Diameter (in.): 14
• Length (in.): 48
• Model: 16L
• Manufacturer: Dorr Oliver

Used-20' Containerized Mobile Bargam 400H Decanter Centrifuge System, stainless steel construction (product contact areas), max bowl speed 4200 rpm, 8 degree contour bowl design, 110 mm single lead conveyor sprayed tungsten carbide wear protection, ceramic infeed zone and cake ports, cyclo gearbox, guards, vibration isolators, PLC controls, 15 kW power pack, discharge conveyor. more info...

• Diameter (in.): 15.5
• Length (in.): 43.3
• Model: 400H
• Manufacturer: Bargam

Used-Westfalia Hysep AD 0918 Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts, 2 gear drives, base, casing, safety guards, vibration isolators, 18.5 kW main motor 3/400V/50 hz, 15 kW backdrive motor (maximum throughput 30,000 m3/hour), L/D 4/1, drum diameter 15.7 (400 mm). more info...

• Diameter (in.): 15.7
• Length (in.): 62.8
• Model: AD 0918
• Manufacturer: WESTFALIA

Used- Sharples P-4550 Vertical Super-D-Canter, Stainless Steel Construction. Bowl dimensions 16-3/4" x 49.5", speed max 3250 rpm generating 2500 g's with drive, control, seals and oil lube/seal system, complete. Total operational time 1-2 weeks, rated at maximum pressure of 150 psi, maximum temperature 700 deg F. Previous service was shale oil clarification pilot plant. 1983 unit. Ca6nm stainless is similar to 410 or 420 stainless. It contains about 12% chromium and 3-5% more info...

• Diameter (in.): 16
• Length (in.): 49
• Model: P-4550
• Manufacturer: Sharples

Used-Siebtechnik DZ4E Decanter. Stainless steel construction. Screw diameter 16" (420 mm). Screw length 47" (1180 mm). Motor 29 hp/22 kW, 3600 rpm, adjustable weir, mounted on a frame. more info...

• Diameter (in.): 16
• Length (in.): 47
• Model: DZ 4 E
• Manufacturer: Siebtechnik

Used-Siebtechnik TS-420EK Decanter Centrifuge. Stainless steel solid bowl, 16.5" (420 mm) diameter x 73" (1850 mm) long, 50 hp/37 kW, 1485 rpm FLP drive. Feed capacity approximately 883 cubic feet/h (25 cubic meters/h). more info...

• Diameter (in.): 16.5
• Length (in.): 73
• Model: TS-420EK
• Manufacturer: Siebtechnik

Used-Mobile Decanter System consisting of: (1) Flottweg Z-4-4/451 solid bowl decanter centrifuge, 15 cubic meters capacity per hour, material of construction is stainless steel on product contact parts, max bowl speed is 3500 rpm by an approximate 55.5 hp/37 kW, 380 volt/50 cycle/2 ph XP motor, complete with gearbox, fiberglass casing. (1) Polymer system/tank. (2) Eccentric screw pumps with motor. (1) Control cabinet. Mobile, completely mounted on trailer with 4 wheels. more info...

• Diameter (in.): 16.5
• Length (in.): 61.6
• Model: Z4D-4/451
• Manufacturer: Flottweg

Used-Flottweg Z-3L Solid Bowl Decanter Centrifuge, stainless steel. Inner diameter 16.5" (420 mm), length 49.6" (1260 mm), with 26 hp/19.5 and 31 hp/23 kW drive with 2 speed 1470 and 2950 rpm, max speed 4000 rpm. With pulleys and gearbox fitted input lower speed 1470 rpm gives bowl speed 1750, 2000, 2500 rpm and scroll conveyor 5, 12, 19 rpm. Higher speed input speed 2950 rpm gives bowl speed 3500, 4000, 5000 rpm and scroll conveyor 10, 24, 38 rpm. more info...

• Diameter (in.): 16.5
• Length (in.): 49.6
• Model: Z-3L
• Manufacturer: Flottweg

Used-Flottweg Z3L Decanter Centrifuge, stainless steel. Inner diameter 16.5" (420 mm), length 50" (1260 mm), with 26 hp/19.5 and 31 hp/23 kW drive, 2 speed 1470 and 2950 rpm, max speed 4000 rpm. With pulleys and gearbox fitted. Input lower speed 1470 rpm gives bowl speed of 1750, 2000, 2500 rpm and scroll conveyor 5, 12, 19 rpm. Higher input speed 2950 rpm gives bowl speed of 3500, 4000, 5000 rpm and scroll conveyor 10, 24, 38 rpm. more info...

• Diameter (in.): 16.5
• Length (in.): 49.6
• Model: Z-3L
• Manufacturer: Flottweg

Used-Flottweg Z-4D Solid Bow Decanter Centrifuge. 3 phase/3 way, 15m3 capacity per hour. Material of construction is stainless steel on product contact parts. Max bowl speed 3500 rpm by an approximate 39 hp/26 kW, 380 volt/50 cycle/3 ph motor. Complete with gearbox, fiberglass casing. Frame mounted. more info...

• Diameter (in.): 16.5
• Length (in.): 66
• Model: Z-4D
• Manufacturer: Flottweg

USED: Screen Bowl Continious Centrufuge Bird; Type 24 x 38; 2400 RPM; 75 HP 550/3/60 more info...

• Diameter (in.): 16.5
• Length (in.): 49
• Model: 2550
• Manufacturer: Bird

USED: Bird/Flottweg solid bowl decanter centrifuge, model 2550, type Z-42-3/401. Stainless steel product contact areas, manufactured in 1986.Per Paul Tawell on 5/31/11: "This machine is presently in test at my customer plant, for a period of 2 weeks. We are not sure it is the machine he need." more info...

• Diameter (in.): 16.5
• Length (in.): 49
• Model: 2550
• Manufacturer: Bird

Used- Bird/Flottweg 2550 Solid Bowl Decanter Centrifuge. 316 Stainless steel on product contact areas. Maximum bowl speed 4000 rpm, 3700 x "G" force, 8 degree contour bowl design, 4.5" double lead conveyor with sintered tungsten carbide wear protection, centripetal pump liquid discharge with adjustable skimmer assembly, cyclo gearbox, stainless steel discharge chutes, fiberglass bowl and belt cover, base, 50 hp main drive motor 230/460/3/60, base and sub-base. more info...

• Diameter (in.): 16.5
• Length (in.): 49.5
• Model: 2550
• Manufacturer: Flottweg

Unused-Flottweg Z4E-4/351 Decanter Centrifuge, Hastelloy (2.4836) on product contact parts. Bowl speed 3500 rpm, bowl diameter 16.54" (420 mm). Simp-drive with 29.3 hp/22 kW, 3000 rpm, 400V/50/460V/60. Backdrive 20 hp/15 kW, 1500 rpm. more info...

• Diameter (in.): 16.54
• Length (in.):  
• Model: Z4E-4/351
• Manufacturer: Flottweg

Used- Sharples PM-35000 "Semi-Sanitary" Super-D-Canter Centrifuge. 2205 Duplex stainless steel (same as 317 ss) construction product contact areas. Maximum bowl speed 3600 rpm, 5-1/2" single lead conveyor with welded hardfacing, 360 degree solids discharge ports, centripetal pump liquid discharge, stainless steel base, stainless steel casing with CIP flush nozzles in top cover, gearbox, feed pipe, 30 KW main drive motor, DC backdrive motor, safety guards. Mounted on stainless more info...

• Diameter (in.): 16.75
• Length (in.): 57.48
• Model: PM-35000
• Manufacturer: Sharples

Used-Alfa Laval AVNX 424B-31G (PM-35000 Super) decanter Centrifuge. 316 stainless steel construction on product contact areas. Max bowl speed 3600 rpm, single lead conveyor. 360 deg cake discharge ports with replaceable wear liners, gearbox with back drive assembly, base, casing, feed pipe, ABC control more info...

• Diameter (in.): 16.75
• Length (in.): 57.48
• Model: AVNX424B-31G
• Manufacturer: Alfa Laval

Used: Sharples PM-35000 Super-D-Canter Centrifuge, 316 stainless steel construction (product contact areas), max bowl speed 3250 rpm, single lead tru-axial vaned conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with replaceable sintered tungsten carbide wear inserts, liquid plate dams, stainless casing and top cover, base, feed pipe, vibration isolators, main drive motor and sub-base, DC variable speed backdrive mounted on stand, more info...

• Diameter (in.): 16.75
• Length (in.): 57.48
• Model: PM35000
• Manufacturer: Sharples

Used-Sharples PM-35000 Super-D-Canter Centrifuge, stainless steel construction (product contact areas), max bowl speed 3250 rpm, single lead conveyor, 360 degree solids discharge ports with sintered tungsten carbide wear protection inserts, cake flingers, liquid plate dams, gearbox, casing, case, feed pipe, safety guards. more info...

• Diameter (in.): 16.75
• Length (in.): 57.48
• Model: PM35000
• Manufacturer: Sharples

Used-Alfa Laval AVNX 424B-31G (PM-35000 Super) decanter Centrifuge. 316 stainless steel construction on product contact areas. Max bowl speed 3600 rpm, single lead conveyor. 360 deg cake discharge ports with replaceable wear liners, gearbox with back drive assembly, base, casing, feed pipe, ABC control more info...

• Diameter (in.): 16.75
• Length (in.): 57.48
• Model: AVNX424B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval XMNX-4565 Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas), maximum bowl speed 2900 rpm, single row of lined cake discharge ports, liquid plate dams, base, casing, gearbox, 55 kW main drive motor, backdrive. more info...

• Diameter (in.): 17
• Length (in.): 92.8
• Model: XMNX-4565
• Manufacturer: Alfa Laval

Used-Alfa Laval NX-4550 Solid Bowl Decanter, stainless steel. Capacity 6 metric tons/hour, bowl diameter 17.7"/11.3" (450/288 mm), max solids density 10 lbs/gallon (1.2 kg/dm3), max bowl speed 3250 rpm. Built 1996. CW motor. more info...

• Diameter (in.): 17.7
• Length (in.): 75.11
• Model: NX-4550
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX0935B-31G Solid Bowl Decanter Centrifuge, stainless steel construction on product contact parts. Bowl speed 3250 rpm, lined solids discharge ports, 140 mm single lead conveyor, base/stand, casing, gearbox, 100 hp main drive motor 380/3/50, control. more info...

• Diameter (in.): 17.7
• Length (in.): 75.1
• Model: AVNX-935B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval NX-730B Solid Bowl Decanter Centrifuge. Carbon steel construction, capacity at 10-12% solids is 20-22 tons (18-20 metric tons/h), "back drive" hydraulic settable between 18-30 differential, 29.3 hp/22 kW, 50 hz motor, with control panel, reported to be reconditioned. more info...

• Diameter (in.): 17.7
• Length (in.): 57.4
• Model: NX-730
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-935B-31G Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas), maximum bowl speed 3200 rpm, 20 deg bowl angle, single row of lined cake discharge ports, liquid plate dams, base, casing, P125 gearbox, 55 kW drive motor, 380 volt/3/50. more info...

• Diameter (in.): 17.7
• Length (in.): 75.1
• Model: AVNX-935B-31G
• Manufacturer: Alfa Laval

Used- Humboldt-Wedeg Screen Bowl Decanter Centrifuge, Model VS-450 x 1000, 304 Stainless Steel Construction. Bowl dimensions 18" x 42". Maximum bowl speed 2900 rpm (2100 x "G"), 13 degree contour bowl design, 0.2 mm screen gap, 2.5' single lead conveyor, tungsten carbide tiles, adjustable liquid weirs, 40:1 ratio planetary gearbox with belt driven backdrive, lube system, casing, base, 40 hp main drive motor 460/3/60. 1775 rpm. more info...

• Diameter (in.): 18
• Length (in.): 42
• Model: VS-450X1000
• Manufacturer: Humboldt Wedag

USED: Bird Solid Bowl Decanter Centrifuge. 18" diameter x 28" long rotating assembly, 316 stainless steel construction on product contact areas, left hand design, 10 degree bowl contour, max bowl speed 2400 rpm. 4" double lead conveyor, end solids discharge ports with wear liners, adjustable liquid skimmer. Approximate 40:1 ratio gearbox, base, casing, feed pipe. Requires an approximately 25 to 30 hp motor. more info...

• Diameter (in.): 18
• Length (in.): 28
• Model: 18 x 28
• Manufacturer: Bird

Used- Bird 2500 18" x 54" Screen Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact areas). Bowl speed 2900 rpm, 15 degree conical section, 25" screen section, 3" double lead conveyor with hard facing, adjustable liquid port dams, 140:1 ratio gearbox, lube system, base, casing, Bebco nitrogen purge unit. 60 hp main drive motor. Control panel. more info...

• Diameter (in.): 18
• Length (in.): 54
• Model: SB-2500
• Manufacturer: Bird

Used- Humboldt-Wedeg VS-450 x 1000 Screen Bowl Decanter Centrifuge, 304 Stainless Steel Construction. Bowl dimensions 18" x 42". Maximum bowl speed 2900 rpm (2100 x "G"), 13 degree contour bowl design, 0.2 mm screen gap, 2.5' single lead conveyor, tungsten carbide tiles, adjustable liquid weirs, 40:1 ratio planetary gearbox with belt driven backdrive, lube system, casing, base, 40 hp main drive motor 460/3/60. 1775 rpm. more info...

• Diameter (in.): 18
• Length (in.): 42
• Model: VS-450X1000
• Manufacturer: Humboldt Wedag

Used- Westfalia CA-450-00-32 Solid Bowl Decanter Centrifuge, 18" x 57", horizontal scroll type centrifuge constructed of centrifugally cast duplex stainless steel. Maximum bowl speed of 3,400 rpm or 3,000 x G. Single flight, hard surfaced scroll conveyor equipped with sprayed tungsten carbide over entire outer diameter and plowing surface. Decanter bowl is driven by a three phase, 30 hp, AC motor mounted in line with the decanter housing which reduces space requirements. more info...

• Diameter (in.): 18
• Length (in.): 57
• Model: CA-450-00-32
• Manufacturer: Westfalia

Used-Bird 2500 Solid Bowl Decanter Centrifuge, model 2500. 7.5 hp motor, complete with control system, frame, etc. more info...

• Diameter (in.): 18
• Length (in.): 54
• Model: 2500
• Manufacturer: Bird

USED: Bird HB-2500 solid bowl decanter centrifuge, 316 stainless steel. 8 deg contour bowl, end discharge. 6" single lead hardsurfaced conveyor. SA-69 80:1 gearbox, 30 hp motor, 230/460/3/60/1765 rpm, 286 T frame with fluid clutch. Includes guards, table, vibration mounts. more info...

• Diameter (in.): 18
• Length (in.): 54
• Model: HB-2500
• Manufacturer: Bird

Used-Pieralisi Jumbo 4 Decanter Centrifuge, stainless steel construction on product contact areas, capacity 55 cubic meters/hour with 1.5-2% solids, 60 hp/45 kW, 3350 rpm, 18.5" (470 mm) diameter, 5.12 L/D centrifugal force 2.950 G. Including original control panel, set of tools, manual and feed pump. more info...

• Diameter (in.): 18.5
• Length (in.):  
• Model: Jumbo 4
• Manufacturer: Pieralisi

Used- Alfa Laval AVNX-5060B-31G Solid Bowl Decanter Centrifuge. 316 (1.4462-B1) Stainless steel construction on product contact parts. Maximum bowl speed 2700 rpm, 8” (203mm) Single lead conveyor with sintered tungsten carbide wear protection tiles, base, casing, gearbox, feed pipe, 75 kw motor. Mounted on 4 legs. more info...

• Diameter (in.): 18.8
• Length (in.): 96.4
• Model: AVNX-5060
• Manufacturer: Alfa Laval

Used- Alfa Laval AVNX-5060B-31G Solid Bowl Decanter Centrifuge. 316 (1.4462-B1) Stainless steel construction on product contact parts. Maximum bowl speed 2700 rpm, 8” (203mm) Single lead conveyor with sintered tungsten carbide wear protection tiles, base, casing, gearbox, feed pipe, 75 kw motor. Mounted on 4 legs. more info...

• Diameter (in.): 18.8
• Length (in.): 96.4
• Model: AVNX-5060
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-5060B-31G Solid Bowl Decanter Centrifuge. Stainless steel (product contact areas), maximum bowl speed 2700 rpm, base, casing, gearbox, 60 hp/45 kW hydraulic drive, 1470 rpm, 500V/50 hz/3 phase, control panel. more info...

• Diameter (in.): 18.8
• Length (in.): 78.10
• Model: AVNX-5060B-31G
• Manufacturer: Alfa Laval

Used-Alfa Laval DSNX4850 Decanter Centrifuge. AISI316 (1.4401) Stainless steel construction on product contact parts. Max bowl speed 3650 rpm, 2 phase, 18.8” diameter x 79.4” straight side (480 mm diameter x 2035 straight side) bowl. Single lead conveyor with tungsten carbide tiles, base, casing, 10 kNm gearbox, feed pipe, motor, back drive. On 4 legs. more info...

• Diameter (in.): 18.8
• Length (in.): 96.4
• Model: 4850
• Manufacturer: Alfa Laval

Used-Alfa Laval AVNX-5060B-31G Solid Bowl Decanter Centrifuge. Stainless steel (product contact areas), maximum bowl speed 2700 rpm, base, casing, gearbox, 60 hp/45 kW hydraulic drive, 1470 rpm, 500V/50 hz/3 phase, control panel. more info...

• Diameter (in.): 18.8
• Length (in.): 78.10
• Model: AVNX-5060B-31G
• Manufacturer: Alfa Laval

Used- GEA-Westfalia TD 3050 solid bowl Decanter Centrifuge. 2205 Stainless steel construction on product contact parts. Maximum bowl speed 3000 rpm, 19.5” diameter x 81.9” straight side (500 mm dia x 2100 st side) bowl. Approximate 6-1/2” Single lead conveyor, base, casing, gearbox, feed pipe, 35 Kw (approximately 52.5 hp) 380-420/50/3 Loher drive motor, safety guards, stainless steel casing. On 4 legs. (1) Gea touch tone control panel. Built 2003 more info...

• Diameter (in.): 19.5
• Length (in.): 81.9
• Model: 3050
• Manufacturer: Westfalia

Used-Gennaretti Decanter Centrifuge, type 500-2 MEI 2 FV, stainless steel. Max bowl speed 2815 rpm, no motor. 19.5" diameter x approximately 70.2" straight side (500 mm diameter x approximately 1800 mm straight side) bowl. more info...

• Diameter (in.): 19.5
• Length (in.): 70.2
• Model: 500-2 MEI 2 FV
• Manufacturer: Gennaretti

Used- GEA-Westfalia TD 3050 solid bowl Decanter Centrifuge. 2205 Stainless steel construction on product contact parts. Maximum bowl speed 3000 rpm, 19.5” diameter x 81.9” straight side (500 mm dia x 2100 st side) bowl. Approximate 6-1/2” Single lead conveyor, base, casing, gearbox, feed pipe, 35 Kw (approximately 52.5 hp) 380-420/50/3 Loher drive motor, safety guards, stainless steel casing. On 4 legs. (1) Gea touch tone control panel. Built 2003 more info...

• Diameter (in.): 19.5
• Length (in.): 81.9
• Model: 3050
• Manufacturer: Westfalia

USED: Westfalia CA-505-01-12 solid bowl decanter centrifuge, 316 stainless steel construction on product contact areas. Max bowl speed 3500 rpm, 6" (160mm) single lead conveyor with welded hardfacing, slotted conveyor feed outlet, grooved beach, casting with stand, lube system, 80 kw main drive motor 380/3/50, 0.17-11.5 kw backdrive motor 380/3/50. Vintage 1990. more info...

• Diameter (in.): 20.1
• Length (in.): 80.4
• Model: CA-505-01-12
• Manufacturer: Westfalia

Unused- Westfalia CA-505-00-12 Solid Bowl Decanter Centrifuge, 316 stainless steel construction (product contact areas), maximum bowl speed 3500 rpm, two gear design, gearbox, 90 kw, 60/460 volt, 3580 rpm main drive, backdrive, lube system feed pipe, casing, frame/stand. Control panel with an Allen-Bradley DTAM Plus panel, a Danfoss variable speed drive, and Allen-Bradley SLC5/03 CPU controls. more info...

• Diameter (in.): 20.1
• Length (in.): 80.4
• Model: CA-505
• Manufacturer: Westfalia

USED: Westfalia CA-505-02-10 solid bowl decanter centrifuge, 316 stainless steel construction on product contact areas. Max bowl speed 3350 rpm, 6" (160mm) single lead conveyor with welded hardfacing, slotted conveyor feed outlet, grooved beach, casting with stand, lube system, 110 kw main drive motor 380/3/50. Vintage 1990. more info...

• Diameter (in.): 20.1
• Length (in.): 80.4
• Model: CA-505-02-10
• Manufacturer: Westfalia

Used-Westfalia UCA 501-00-32 Solid Bowl Decanter Centrifuge, stainless steel construction (product contact areas). Bowl speed 3000 rpm, Westfalia rated capacity 20 m3/h. Driven by a Flender-Loher 34 kW motor with 11 kW backdrive. 380/420/3/50, control panel. more info...

• Diameter (in.): 20.1
• Length (in.): 79
• Model: UCA 501-00-32
• Manufacturer: Westfalia

USED: Westfalia CA-505-02-10 solid bowl decanter centrifuge, 316 stainless steel construction on product contact areas. Max bowl speed 3350 rpm, 6" (160mm) single lead conveyor with welded hardfacing, slotted conveyor feed outlet, grooved beach, casting with stand, lube system, 110 kw main drive motor 380/3/50. Vintage 1990. more info...

• Diameter (in.): 20.1
• Length (in.): 80.4
• Model: CA-505-02-10
• Manufacturer: Westfalia

Used-Hysep HD-54-X/2 Solid Bowl Decanter Centrifuge. Stainless steel construction (product contact areas), bowl length 79" (2000 mm) x width 21.3" (540 mm), max speed 3800 rpm, base, casing, feed pipe, gearbox, grease lubrication pump, drive motor, backdrive motor. Total weight 5.4 tons (4900 kg). more info...

• Diameter (in.): 21.3
• Length (in.): 79
• Model: HD54X-2
• Manufacturer: Hysep

Used-KHD Humboldt Wedag S3-2 Solid Bowl Decanter Centrifuge. Maximum bowl speed 2050 rpm. Inside drum diameter 23.6" (600 mm). Drum wall thickness 0.6" (16 mm). 50 hz. more info...

• Diameter (in.): 23.6
• Length (in.): 60
• Model: S3-2
• Manufacturer: KHD Humboldt Wedag

Used-Unused-Flottweg Z6E-4/454 Solid Bowl "Ethanol/Spent Grain" Decanter Centrifuge. 1.4463 stainless steel construction on product contact areas, max bowl speed 3200 rpm, tungsten carbide hardface wear protection on scroll, SP 4.12 gearbox, SIMP gear scroll drive technology with SIMP control, lubrication system, ABB VFD drives, Allen Bradley controls, 150 hp main drive, 460/3/60, 30 hp backdrive, hardsurfaced. Available immediately due to cancelled ethanol plant project. more info...

• Diameter (in.): 24
• Length (in.): 97
• Model: Z6E
• Manufacturer: Flottweg

Used- Bird Screen Bowl Centrifuge, approximately 28'' diameter x 59'' long, 316 stainless steel bowl. Approximately 4'' lead conveyor, base, and top cover. No screens, has block off plates. Requires motor. more info...

• Diameter (in.): 24
• Length (in.): 60
• Model: 24 x 60
• Manufacturer: Bird

USED: Sharples XM-505 Super-D-Canter Centrifuge. 317/316 stainless steel construction on product contact areas. Max bowl speed 2800 rpm, 8" single lead tru-axial design conveyor with STC wear protection tiles and vane section, STC lined feed nozzles, 360 degree solid discharge port with STC wear inserts, ring dam diameter is 11.25. The front hub dam openings are slots 2" x 4.5" on a 14" diameter. 98:1 gearbox, lube system, base, casing with fiberglass top cover, 100 hp 460/3/60/1785 more info...

• Diameter (in.): 24
• Length (in.): 76
• Model: XM-505
• Manufacturer: Sharples

Used-Unused-Flottweg Z6E-4/454 Solid Bowl "Ethanol/Spent Grain" Decanter Centrifuge. 1.4463 stainless steel construction on product contact areas, max bowl speed 3200 rpm, tungsten carbide hardface wear protection on scroll, SP 4.12 gearbox, SIMP gear scroll drive technology with SIMP control, lubrication system, ABB VFD drives, Allen Bradley controls, 150 hp main drive, 460/3/60, 30 hp backdrive, hardsurfaced. Available immediately due to cancelled ethanol plant project. more info...

• Diameter (in.): 24
• Length (in.): 97
• Model: Z6E
• Manufacturer: Flottweg

Used- Bird HB-3700 Solid Bowl Decanter Centrifuge, Carbon Steel. Maximum bowl speed 1400 rpm, 8 degree contour bowl, 9" double lead conveyor with ceramic tiles. Driven by a 50 hp, 3/60/460 volt, 1750 rpm motor. Includes a backdrive tensioner, guard chute. Unitized on a common carbon steel base. No gearbox. more info...

• Diameter (in.): 24
• Length (in.): 72
• Model: HB-3700
• Manufacturer: Bird

Used- Bird 24 x 86 Solid Bowl Decanter Centrifuge, 316 Stainless Steel. Maximum bowl speed 2550 rpm. Standard flow, 10 deg contour bowl, 9" double lead conveyor with welded hardfacing, end discharge, cake discharge ports, base, casing, feed tube, safety guards. more info...

• Diameter (in.): 24
• Length (in.): 86
• Model: 24 X 86
• Manufacturer: Bird

Used- Bird HB-3700 (24" x 72") solid bowl decanter centrifuge. Carbon steel construction. Max bowl speed 1400 rpm. 8 degree contour bowl design, 9" single lead conveyor, base, casing, gearbox, 30 hp main drive motor with fluid coupling, hydraulic backdrive, vibration switch, vibration isolators. more info...

• Diameter (in.): 24
• Length (in.): 72
• Model: HB-3700
• Manufacturer: Bird

Used- Bird HB-3700 Solid Bowl Decanter Centrifuge. Stainless steel construction (product contact areas). 24" x 72" bowl assembly, maximum bowl speed 1800 rpm, 10 degree contour bowl assembly, 8" double lead conveyor with welded hardfacing, end solid discharge ports with wear liners, adjustable liquid plate dams, base, casing, gearbox, feed pipe, lube system, 50 hp explosion proof drive motor with sub-base. more info...

• Diameter (in.): 24
• Length (in.): 72
• Model: HB-3700
• Manufacturer: Bird

Used- Bird 24 x 86 Solid Bowl Decanter Centrifuge, Carbon Steel. Maximum bowl speed 2250 rpm, left hand design, cyl/10/3 deg contour. 9" double lead conveyor, 150 hp Reliance motor 460/3/60/1780 rpm. Standard flow. Includes lube system, feed tube, guards and vibration mounts. No gearbox. more info...

• Diameter (in.): 24
• Length (in.): 86
• Model: 24 X 86
• Manufacturer: Bird

Used- Bird HB-3900 Solid Bowl Decanter Centrifuge, 304 Stainless Steel. Maximum bowl speed 1400 rpm, right hand design, 10 deg contour bowl, ribbed beach, end discharge with flingers and wear liners, adjustable liquid ports. 8" double lead hardsurfaced conveyor, SA-69 140:1 gearbox, 40 hp belt driven Eaton backdrive, 75 hp Reliance motor 460/3/60/1770 rpm/405 T frame. Includes feed tube, guards, vibration switch, vibration mounts, carbide-lined solids chute, control panel, more info...

• Diameter (in.): 24
• Length (in.): 96
• Model: HB-3900
• Manufacturer: Bird

Used-Flottweg Z-6E-4/301g Solid Bowl Decanter Centrifuge. Hastelloy construction (product contact areas). Bowl speed 2500 rpm, bowl diameter 24.4" (620 mm), maximum working temperature 212 deg F (100 deg C). Driven by a 120 hp / 90 kW geared motor, 400/690V/3/50, with a 60 hp / 45 kW backdrive motor, Eex de II CT 4 classed. more info...

• Diameter (in.): 24.4
• Length (in.):  
• Model: Z-6E-4/301g
• Manufacturer: Flottweg

Used-Flottweg Z-6E-4/301g Solid Bowl Decanter Centrifuge. Hastelloy construction (product contact areas). Bowl speed 2500 rpm, bowl diameter 24.4" (620 mm), maximum working temperature 212 deg F (100 deg C). Driven by a 120 hp / 90 kW geared motor, 400/690V/3/50, with a 60 hp / 45 kW backdrive motor, Eex de II CT 4 classed. more info...

• Diameter (in.): 24.4
• Length (in.):  
• Model: Z-6E-4/301g
• Manufacturer: Flottweg

Used-Alfa Laval XNNX-4565 Solid Bowl Decanter Centrifuge. Max bowl speed 2900 rpm, 2 phase, 25.4" diameter x 92.8" straight side bowl. Single lead conveyor, base, casing, gearbox, feed pipe, 55 kW (approximately 82.5 hp) 380/50/3 drive motor, safety guards, stainless steel casing. On platform. more info...

• Diameter (in.): 24.5
• Length (in.): 92.8
• Model: XNNX-4565
• Manufacturer: Alfa Laval

Used-New- Sharples SG-14 Super-D-Canter centrifuge rotating assembly, 316/317 stainless steel construction. Max bowl speed 2700 rpm. "Spent grain" conveyor design with incline plate vanes and sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear protection, feed zone liner, "spent grain" design feed accelerator, bowl wear liner, 9" diameter hub assemblies, pillow block assemblies, casing seal assemblies, 95:1 more info...

• Diameter (in.): 25
• Length (in.): 90
• Model: P-5400
• Manufacturer: Sharples

Used-40' Containerized Mobile Bargam 650LH Decanter Centrifuge System, stainless steel construction (product contact areas), max bowl speed 3000 rpm, 205 mm single lead conveyor with wear protection, ceramic lined feed zone and cake ports, cyclo gearbox, guards, vibration isolators, control, discharge conveyor, 120 hp drive motor 460/3/60, hydraulic backdrive, feed pump with 110 macerator. more info...

• Diameter (in.): 25
• Length (in.): 102
• Model: 650LH
• Manufacturer: Bargam

Used-Sharples PC-81,000 Super-D-Canter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 2500 rpm, 360 deg cake discharge with wear liners, 8.5" single lead conveyor with STC wear protection tiles, base, casing with fiberglass top cover, 98:1 gearbox, 150 hp motor 460/3/60/1800 rpm, 40 hp backdrive, lube system, guards. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used-Sharples PC-81,000 Super-D-Canter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 2500 rpm, 360 deg cake discharge with wear liners, 8.5" single lead conveyor with STC wear protection tiles, base, casing with fiberglass top cover, 98:1 gearbox, 150 hp motor 460/3/60/1800 rpm, 40 hp backdrive, lube system, guards. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used-Tomoe Sharples TSM-70 Super-D-Canter Centrifuge. Stainless steel construction (product contact areas), bowl speed 2420 rpm, 360 degree solid discharge ports with wear liners, single lead conveyor, liquid plate dams, base, stainless steel casing, gearbox, lube system, vibration isolators, feed pipe, safety guards, main drive motor, backdrive, mounted on approximate 4' stand. more info...

• Diameter (in.): 25
• Length (in.): 90
• Model: TSM-70
• Manufacturer: Tomoe

Used-Sharples PC-81,000 Super-D-Canter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 2500 rpm, 360 deg cake discharge with wear liners, 8.5" single lead conveyor with STC wear protection tiles, base, casing with fiberglass top cover, 98:1 gearbox, 150 hp motor 460/3/60/1800 rpm, 40 hp backdrive, lube system, guards. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used-Sharples PC-81000 Super-D-Canter Centrifuge, 304 stainless steel construction on product contact areas. Max bowl speed 2300 rpm, single lead conveyor with tiles, 360 discharge with STC liners, gearbox, sub-base, casing, poly design feed tube, fiberglass top cover, lube system, inline main drive base, drive motor, AC backdrive, mounted on mobile skid. Manufactured 2007, never installed. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used-Sharples PC-81000 Super-D-Canter Centrifuge. 304 Stainless steel construction on product contact areas. Max bowl speed 2300 rpm, single lead conveyor with tiles, 360 discharge with STC liners, gearbox, sub-base, casing, poly design feed tube, fiberglass top cover, lube system, inline main drive base, drive motor, AC backdrive, mounted on mobile skid. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used-Sharples PC-81000 Super-D-Canter Centrifuge. 304 Stainless steel construction on product contact areas. Max bowl speed 2300 rpm, single lead conveyor with tiles, 360 discharge with STC liners, gearbox, sub-base, casing, poly design feed tube, fiberglass top cover, lube system, inline main drive base, drive motor, AC backdrive, mounted on mobile skid. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used-Sharples PC-81000 Super-D-Canter Centrifuge. 304 Stainless steel construction on product contact areas. Max bowl speed 2300 rpm, single lead conveyor with tiles, 360 discharge with STC liners, gearbox, sub-base, casing, poly design feed tube, fiberglass top cover, lube system, inline main drive base, drive motor, AC backdrive, mounted on mobile skid. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used-Unused- Sharples P-5000 "Sanitary" Super-D-Canter Centrifuge. 316/317 Stainless steel construction (product contact areas), sanitary polished 5" single lead conveyor, hogged out cake discharge ports, liquid plate dams, 95:1 gearbox with stainless steel gearbox guard, feed tube, stainless steel base, casing with clean-in-place spray header, lube system, feed pipe, main drive motor with clean-in-place gear drive and clutch, stainless steel swing arm style drive motor, more info...

• Diameter (in.): 25
• Length (in.): 65
• Model: P-5000
• Manufacturer: Sharples

Used-Sharples PC-81000 Super-D-Canter Centrifuge, 304 stainless steel construction on product contact areas. Max bowl speed 2300 rpm, single lead conveyor with tiles, 360 discharge with STC liners, gearbox, sub-base, casing, poly design feed tube, fiberglass top cover, lube system, inline main drive base, drive motor, AC backdrive, mounted on mobile skid. Manufactured 2007, never installed. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used-Sharples PC-81000 Super-D-Canter Centrifuge. 304 Stainless steel construction on product contact areas. Max bowl speed 2300 rpm, single lead conveyor with tiles, 360 discharge with STC liners, gearbox, sub-base, casing, poly design feed tube, fiberglass top cover, lube system, inline main drive base, drive motor, AC backdrive, mounted on mobile skid. more info...

• Diameter (in.): 25
• Length (in.): 115
• Model: PC-81000
• Manufacturer: Sharples

Used- Westfalia CA-655-001 Solid Bowl Decanter Centrifuge, 316 Stainless Steel. Maximum bowl speed 2950 rpm (3140 x "G"), 7" single lead conveyor with welded hardfacing, carbide lined feed ports, carbide lined solids ports (2.5" diameter), Rotodif backdrive (#112S) with 30 kw hydraulic pump and reservoir 380/3/50, 110 kw main drive motor 380/3/50 with fluid clutch, motor sub-base, casing, base, control. Name tag rates speed at 2450 rpm, catalog rates max speed at 2950 rpm. more info...

• Diameter (in.): 25.6
• Length (in.): 94.4
• Model: CA-655-001
• Manufacturer: Westfalia

Used-40' Mobile Pieralisi Giant 2 Decanter Centrifuge System, stainless steel construction (product contact areas), max bowl speed 2200 rpm, single lead conveyor with wear protection, 55 kW roto-dif, guards, vibration isolators, control panel, discharge conveyor, 350 kW Kohler generator with 400 amp transfer switch. (2) 4" x 4" AMP pumps, 225 gallon stainless steel centrate tank, poly system, Seepex feed pump. more info...

• Diameter (in.): 27.5
• Length (in.): 102.5
• Model: Giant 2
• Manufacturer: Pieralisi

Unused-Flottweg Z-73-4 Solid Bowl Decanter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 2800 rpm, 3160 x G force, single lead conveyor with tungsten carbide wear protection, solid discharge port with replaceable wear liners, base, casing, vibration isolators, feed pipe, lubrication system, (no motor & controls). more info...

• Diameter (in.): 28.7
• Length (in.): 117.3
• Model: Z-73
• Manufacturer: Flottweg

Unused-Flottweg Z-73-4 Solid Bowl Decanter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 2800 rpm, 3160 x G force, single lead conveyor with tungsten carbide wear protection, solid discharge port with replaceable wear liners, base, casing, vibration isolators, feed pipe, lubrication system, (no motor & controls) more info...

• Diameter (in.): 28.7
• Length (in.): 117.3
• Model: Z-73
• Manufacturer: Flottweg

Used- Sharples PM-75000 Super-D-Canter Centrifuge. 316/317 Stainless steel construction on product contact areas. Maximum bowl speed 2600 rpm, 360 degree solid discharge ports with STC liners, 10" single lead conveyor with STC wear protection tiles, 95:1 gearbox, base, casing with fiberglass top cover, 200 hp main drive motor with sub-base, 60 hp backdrive stand, lube system, and guards. more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

USED: Sharples PM-75000 Super-D-Canter centrifuge, 316/317 stainless steel construction on product contact areas. Max bowl speed 2600 rpm, 360 degree solid discharge ports with STC liners, 10" single lead conveyor with STC wear protection tiles, 95:1 gearbox, base, casing with fiberglass top cover, 150 hp main drive motor with sub-base, 40 hp eddy current backdrive lube system, feed tube, vibration isolators/switch, guards. (3167 hours of use) more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

Used- Sharples PM-75000 Super-D-Canter Centrifuge, 316/317 Stainless Steel Construction. Maximum bowl speed 2600 rpm, 10" single lead "quasi-axil" conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten wear inserts, moon liquid plate dams, 95:1 gearbox, base, casing with fiberglass top cover, feed tube, lube system, main drive motor sub-base, 100 hp DC backdrive and stand, safety guards, Sharples "ABC" control more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

Used- Sharples PM-75000 Super-D-Canter Centrifuge, 316/317 Stainless Steel Construction. maximum bowl speed 2600 rpm, 10" single lead "quasi-axil" conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten wear inserts, moon liquid plate dams, 95:1 gearbox, base, casing with fiberglass top cover, feed tube, lube system, main drive motor sub-base, 125 HP main drive motor, 25 HP DC back drive and stand, safety guards, more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

USED: Sharples P-7500 Super-D-Canter centrifuge. Stainless steel construction (product contact areas), max bowl speed 2000 rpm, 10" single "quasi-axial" lead conveyor with extended length sintered tungsten carbide wear protection tiles, 3.5" sintered tungsten carbide lined straight-through design feed nozzles, 360 degree solid discharge ports with replaceable sintered tungsten carbide wear inserts, bowl liner, P-300 gearbox 80:1 ratio, base, casing with carbon steel top cover, more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: P-7500
• Manufacturer: Sharples

USED: Sharples PM-75000 Super-D-Canter centrifuge, 316/317 stainless steel construction on product contact areas. Max bowl speed 2600 rpm, 360 degree solid discharge ports with STC liners, 10" single lead conveyor with STC wear protection tiles, 95:1 gearbox, base, casing with fiberglass top cover, 150 hp main drive motor with sub-base, 40 hp eddy current backdrive lube system, feed tube, vibration isolators/switch, guards. (8468 hours of use) more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

Used- Sharples DS-706 Super-D-Canter Centrifuge (dry solids design). 316/317 Stainless steel construction (product contact areas). Maximum bowl speed 2600 rpm, 12” single lead Quasi-Axil conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear inserts, moon liquid plate dams, bowl silence rings, P180 (95:1 ratio) gearbox, base, stainless steel casing with solids area wear liner, lubrication system, more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: DS-706
• Manufacturer: Sharples

Used- Sharples DS-706 Super-D-Canter Centrifuge (dry solids design). 316/317 Stainless steel construction (product contact areas). Maximum bowl speed 2600 rpm, 12” single lead Quasi-Axil conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear inserts, moon liquid plate dams, bowl silence rings, P180 (95:1 ratio) gearbox, base, stainless steel casing with solids area wear liner, lubrication system, more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: DS-706
• Manufacturer: Sharples

Used- Sharples DS-706 Super-D-Canter Centrifuge (dry solids design). 316/317 Stainless steel construction (product contact areas). Maximum bowl speed 2600 rpm, 12” single lead Quasi-Axil conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear inserts, moon liquid plate dams, bowl silence rings, P180 (95:1 ratio) gearbox, base, stainless steel casing with solids area wear liner, lubrication system, more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: DS-706
• Manufacturer: Sharples

Used- Sharples Super-D-Canter PM-76000 Centrifuge. 317 Stainless steel construction on product contact areas. Maximum bowl speed 2600 rpm, 10" single lead conveyor w/STC wear protection tiles, base, casing with stainless top cover, gearbox (95:1 ratio) , lube system, In-line drive stand, 300 hp, 3/60/460 volt, 1780 rpm drive motor, & sub-base, safety guards, feed pipe, backdrive stand, no motor. more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: PM-76000
• Manufacturer: Sharples

Used- Sharples Super-D-Canter DS-706 Centrifuge, 317 Stainless steel construction on product contact areas. Maximum bowl speed 2600 rpm, 10" single lead conveyor w/STC wear protection tiles, base, casing with stainless top cover, gearbox (95:1 ratio) , lube system, 300hp, 3/60/460 volt, 1780 rpm drive motor, & sub-base, safety guards, feed pipe, backdrive stand no motor. more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: DS-706
• Manufacturer: Sharples

Used- Sharples DS-706 Super-D-Canter Centrifuge (dry solids design). 316/317 Stainless steel construction (product contact areas). Maximum bowl speed 2600 rpm, 12” single lead Quasi-Axil conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear inserts, moon liquid plate dams, bowl silence rings, P180 (95:1 ratio) gearbox, base, stainless steel casing with solids area wear liner, lubrication system, more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: DS-706
• Manufacturer: Sharples

Used- Sharples DS-706 Super-D-Canter Centrifuge (dry solids design). 316/317 Stainless steel construction (product contact areas). Maximum bowl speed 2600 rpm, 12” single lead Quasi-Axil conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear inserts, moon liquid plate dams, bowl silence rings, P180 (95:1 ratio) gearbox, base, stainless steel casing with solids area wear liner, lubrication system, more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: DS-706
• Manufacturer: Sharples

Used- Sharples DS-705 Super-D-Canter Centrifuge, 317 stainless steel construction (product contact areas), 10" single lead conveyor with STC tiles, 360 degree solid discharge ports with replaceable sintered tungsten carbide wear inserts, moon liquid plate dams, P-180 gearbox ratio 95:1, stainless steel casing with stainless steel top cover, lube system, main drive sub-base, 250 hp main drive motor, 100 hp DC back- drive with 1 hp cooling fan and stand. more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: DS-705
• Manufacturer: Sharples

Used- Sharples DS-706 Super-D-Canter Centrifuge (dry solids design). 316/317 Stainless steel construction (product contact areas). Maximum bowl speed 2600 rpm, 12” single lead Quasi-Axil conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear inserts, moon liquid plate dams, bowl silence rings, P180 (95:1 ratio) gearbox, base, stainless steel casing with solids area wear liner, lubrication system, more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: DS-706
• Manufacturer: Sharples

Used- Sharples DS-705 Super-D-Canter Centrifuge, 317 stainless steel construction (product contact areas), 10" single lead conveyor with STC tiles, 360 degree solid discharge ports with replaceable sintered tungsten carbide wear inserts, moon liquid plate dams, P-180 gearbox ratio 95:1, stainless steel casing with stainless steel top cover, lube system, main drive sub-base, 250 hp main drive motor, 100 hp DC back- drive with 1 hp cooling fan and stand. more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: DS-705
• Manufacturer: Sharples

Used-Sharples DSX-706 Super-D-Canter Centrifuge. Stainless steel construction on product contact areas, 360 degree solids discharge ports with sintered tungsten carbide wear protection inserts, single lead conveyor with sintered tungsten carbide wear protection tiles, base, casing, drive motor, inline drive motor stand, control. more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: DSX-706
• Manufacturer: Sharples

Used- Sharples PM-75000 Super-D-Canter Centrifuge, 316/317 Stainless Steel Construction On Product Contact Areas. Maximum bowl speed 2600 rpm, 360 degree solid discharge ports with STC liners, 10" single lead conveyor with STC wear protection tiles, 95:1 gearbox, base, casing with fiberglass top cover, 150 hp main drive motor with sub-base, backdrive stand missing motor, lube system, feed  tube, vibration isolators/switch, guards. more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

USED: Sharples PM-75000 Super-D-Canter centrifuge, 316/317 stainless steel construction on product contact areas. Max bowl speed 2600 rpm, 360 degree solid discharge ports with STC liners, 10" single lead conveyor with STC wear protection tiles, 95:1 gearbox, base, casing with fiberglass top cover, 150 hp main drive motor with sub-base, 40 hp eddy current backdrive lube system, feed tube, vibration isolators/switch, guards. (9472 hours of use) more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

Used- Sharples DS-705 Super-D-Canter Centrifuge (dry solids design), 316/317 stainless steel construction (product contact areas). Maximum bowl speed 2600 rpm, 12" single lead conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear inserts, moon liquid plate dams, bowl silence rings, P180 (95:1 ratio) gearbox, base, stainless steel casing with solids area wear liner, lubrication system, poly type more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: DS-705
• Manufacturer: Alfa Laval

Used- Sharples PM-75000 Super-D-Canter Centrifuge, 316/317 Stainless Steel Construction On Product Contact Areas. Max bowl speed 2600 RPM, approximate 8-1/2" quasi-axial single lead conveyor with sintered tungsten carbide water protection tiles, 360 degree solid discharge ports with STC wear liners, liquid plate dams, P-180 (95:1 ratio) gearbox, base, casing with fiberglass top cover, poly design feed pipe, lube system, inline main drive base with a 150 HP, 3/60/460 Volt, more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

Used- Sharples DS-705 Super-D-Canter Centrifuge (dry solids design), 316/317 stainless steel construction (product contact areas). Maximum bowl speed 2600 rpm, 12" single lead conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with sintered tungsten carbide wear inserts, moon liquid plate dams, bowl silence rings, P180 (95:1 ratio) gearbox, base, stainless steel casing with solids area wear liner, lubrication system, poly type more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: DS-705
• Manufacturer: Alfa Laval

Used-Sharples PM-75000 Super-D-Canter Centrifuge. Stainless steel construction on product contact areas, 360 degree solids discharge ports with sintered tungsten carbide wear protection inserts, single lead conveyor with sintered tungsten carbide wear protection tiles, base, casing, drive motor, inline drive motor stand, control, mounted on trailer. more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples

Used- Sharples PM-76000 Super-D-Canter Centrifuge. 316/317 Stainless steel construction on product contact areas. Maximum bowl speed 2600 rpm, 360 degree solid discharge ports with STC liners, 12" single lead conveyor with STC wear protection tiles, 95:1 gearbox, base, casing with top cover, 200 hp main drive motor with sub-base, 40 hp backdrive stand, lube system, guards, and control panel. more info...

• Diameter (in.): 29
• Length (in.): 120
• Model: PM-76000
• Manufacturer: Sharples

Used- Sharples PM-75000 Super-D-Canter Centrifuge, 316/317 Stainless Steel Construction On Product Contact Areas. Maximum bowl speed 2600 rpm, 360 degree solid discharge ports with STC liners, 12" single lead conveyor with STC wear protection tiles, 95:1 gearbox, base, casing with fiberglass top cover, 150 hp main drive motor with sub-base, 40 hp Eddy Current backdrive, lube system, feed tube, vibration isolators/switch, guards. more info...

• Diameter (in.): 29
• Length (in.): 92
• Model: PM-75000
• Manufacturer: Sharples