Aaron Equipment Company Exhibited at Power-Gen International with Great Success

by AaronEquipmentCo17. January 2017 08:19
Aaron Equipment Company recently exhibited at the 2016 Power-Gen International tradeshow on December 13-15, 2016 at the Orange County Convention Center in Orlando, Florida. The show had 1,400 exhibitors, 70+ Conferences and was attended by nearly 20,000 people from 105 countries. Attendees were able to discover a wide variety of products and services that represented the generation sector with emphasis on new solutions and innovations for the future. [More]

Aaron Equipment Company Poised to Meet Demand of Expanding Heat Exchanger Market

by AaronEquipmentCo12. October 2016 11:28
According to market research firm Markets and Markets, the heat exchangers market is anticipated to be worth 19.14 billion U.S. dollars by 2021. That figure represents a cost-adjusted growth rate of 8.2% over 2016’s $12.94 billion valuation. In the interim, Global Industry Analysts expect the heat exchanger market to jump to $13.5 billion by the year 2017. What is fueling all this growth? [More]

Why Are Backup Generators Vital to Businesses?

by AaronEquipmentCo30. September 2015 13:42
Any business owner who witnessed Hurricane Sandy on the East Coast in 2012 or Hurricane Katrina’s southern wrath in 2005 knows that weather isn’t something to take one’s chances with. These so-called “super storms” devastated businesses not for just a few hours as is typically the case but for days or, in some cases, even weeks, hammering home the importance of a backup power supply. But even shorter-term power outages can really add up when it comes to the lost worker productivity and lost revenue they bring about. [More]

Five Reasons to Buy Used Equipment and Machinery

by AaronEquipmentCo17. April 2015 08:50
The gut reaction when your old machinery dies or your business operations require the addition of another piece of equipment to the mix is to go out and purchase brand new. But there are many reasons to buy used equipment rather than new machinery. Let’s take a closer look at some of these reasons. [More]

Top 10 Most Popular Pieces of Equipment for Manufacturing Companies

by AaronEquipmentCo26. February 2015 08:03
In 2011 (the most recent year for which statistics are available), machinery manufacturing represented one of the largest and most competitive sectors of the American manufacturing economy, according to the Department of Commerce’s International Trade Administration. The Bureau of the Census estimates that manufacturers’ sales of machinery amounted to $360.9 billion in 2010.[More]

Seven Reasons to Lease Manufacturing Equipment

by AaronEquipmentCo23. September 2014 06:38
You’ve decided it’s time to purchase some processing equipment. That’s the easy part. Now you’ve got to wade through all your possible payment options. Who knew there could be so many? One of these payment methods, which you might at first glance reject offhandedly, may actually be the best option for your manufacturing facility. Read on to learn why leasing manufacturing equipment might be better than immediately buying it outright. [More]

Five Tips for Buying Used Equipment

by AaronEquipmentCo4. September 2014 08:20
You’re looking to save a little bit of money—and let’s face it, what business isn’t these days? As a result, you’re considering purchasing used equipment instead of buying new, but you are still not sure if you want to take the risk. After all, new equipment comes with more assurances and therefore greater peace of mind. Buying used equipment can be just as satisfying of an experience, not to mention a more affordable one, as buying new equipment … provided you follow a few simple guidelines.[More]

Aaron Equipment, Aaron Kendell Packaging Equipment (AEK) and Paul O. Abbe will be Exhibiting at INTERPHEX 2013 in New York

by AaronEquipmentCo21. March 2013 19:55
Aaron Equipment, Aaron Kendell Packaging Equipment (AEK) and Paul O. Abbe will be exhibiting at the 2013 INTERPHEX pharmaceutical and biopharmaceutical trade show at the Javits Center in New York, NY on April 23-25, 2013. Aaron Equipment and Aaron Kendell Packaging Equipment will be in Booth #2279 exhibiting Late-model, good-quality USED pharmaceutical and biopharmaceutical equipment. Paul O. Abbe will be exhibiting in Booth #2283 showcasing NEW solids drying, mixing, blending and size reduction equipment which have been engineered specifically for thousands of customers around the world. [More]

Aaron Equipment Company to Take Part in NPE Show in Orlando, Florida

by AaronEquipmentCo3. April 2012 11:47
Chicago, IL - When the 2012 NPE Show gets underway in Orlando, Florida this April 2, Aaron Equipment Company will be exhibiting in Booth # 2007 of the West Hall. Aaron Equipment experts will be on hand throughout the exhibition, which runs through April 5, to discuss their large inventory of used plastics equipment as well as their appraisal, liquidation and auction services. While speaking with Aaron Equipment reps, visitors are invited to check out the Orange County Chopper “Aaron Bike,” which will be on display throughout the four-day gala celebration. The world’s largest plastics showcase for more than 70 years, the NPE Show features in excess of two million square feet of exhibits, technology and business solutions. This year, five million more pounds of running machinery will be on the show floor than ever recorded in the show’s history. New and emerging technologies spanning all segments of the plastics industry will also be on display. NPE is billed as the place to be when it comes to “innovative designs and processes that are reshaping the future of plastics.” With more than 26 plastics categories and thousands of pieces of plastic equipment in its inventory, Aaron Equipment is one of these industry reshapers. The company carries good-quality, late model machinery, much of it in reconditioned-to-new condition so that plastics professionals save substantial money without sacrificing quality. Some of the more than two dozen industrial categories encompassed by Aaron Equipment’s extensive inventory include plastics blow molding, plastics continuous compounding, plastic dryers, plastic extruders, plastic mixing equipment, plastic pipe – profile extrusion lines, plastic recycling lines and plastic sheet extrusion lines. “If you’ve got an industrial plastics requirement, chances are we can fill it,” says Aaron spokesperson Bob Perna. “Stop by our booth at the NPE Show to speak with one of our pros. We’ll be happy to come up with an affordable plastics equipment solution to meet your specific needs. Aaron Equipment also offers an extensive range of services to the plastics industry.” As a world leader in used processing equipment for the plastics industry, the Aaron Equipment’s service offerings to which Perna refers include appraisals, liquidations and auctions for both buyers and sellers of used plastics equipment. To learn more about the various sales and purchasing options of used plastics equipment Aaron Equipment Company offers, visit http://www.aaronequipment.com/. For more information on the professional services Aaron Equipment extends to the plastics industry and to speak with an Aaron expert, drop by Booth #2007 at the 2012 NPE Show.

Aaron Industrial Marketplace Auction Platform Targets New Niche for 2012

by AaronEquipmentCo5. February 2012 11:08
AIM Auction Platform Focusing on Businesses that Need to Liquidate Equipment Fast Chicago, IL – February 5, 2012 – Following a highly successful effort last month to quickly liquidate a going-out-of-business heat treating metal parts manufacturer, Aaron Industrial Marketplace (AIM) realized that it had unearthed an overlooked niche. The auction platform provider immediately set its sights on serving businesses in a similar situation. That accomplishment has fueled AIM to make plants and manufacturing facilities that are closing their doors and must therefore sell off their assets fast an additional corporate focus in 2012. The Aaron Industrial Marketplace has been in business for over two years now, and in that timeframe it has helped numerous businesses turn their excess equipment and machinery into cash. The venture into rapid liquidation of equipment is therefore more of an extension of its already proven business model rather than a brand new direction. “We’ve always targeted businesses that had equipment to sell but didn’t have the expertise to get it sold themselves. Now all we’re doing is adding a lack of time to that equation,” explains company spokesperson Bruce Baird. “We offer a turnkey solution to convert excess machinery to cash, and we have the know-how and experience to get it done fast.” Speed and expert assistance aren’t the only reasons a business should consider the AIM platform as a means of selling off its excess inventory, though. The Aaron Industrial Marketplace team’s ability to get the job done with minimal interruption to normal operations is another. But perhaps the most compelling one is AIM’s capability to maximize a business’s profits on such sales. “Before an auction gets underway, we take the time to talk to business owners one on one. During that interaction, we’re able to give them a better understanding of what their equipment is really worth. Oftentimes, AIM sees more value in tangible assets than the actual business owners do. As a result, we can help them secure the most money for their equipment,” Baird adds. What’s more, the amount of equipment needing to be liquidated is not an issue for AIM. The Aaron Industrial Marketplace has the capability to sell individual production pieces all the way to complete plants, even under tight deadlines. In less than 30 days, the company was able to sell off all the leftover assets of a soon-to-close heat treating plant and leave behind a clean building. Business owners who need to clear out excess machinery and equipment in a hurry can learn more about what the Aaron Industrial Marketplace has to offer online at http://www.AaronIndustrialMarketplace.com. For more information on the auction platform that is now focusing on easing the asset liquidation process, contact Bruce Baird at (510) 452-7858. ###

Archives

Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

Sell Equipment
Search Icon
Browse Inventory

View our entire inventory process equipment inventory online or visit our location for an inspection.

View Inventory
Phone Icon
Contact us

Call us and speak with an equipment specialist to answer any questions you may have.

630-350-2200