Hydraulic Press Presses

E-mail this page Printable Version Sell your Machinery

24 Hydraulic Press Presses In Stock

»Click on links to view detailed information and additional photos


View Cart REQUEST PRICE QUOTE Tons: 20 Left to Right (in.): Front to Back (in.): Manufacturer: Morgan 40869001 Used-Morgan Press With Temperature Controls. 20 ton lab press, model G-55TB, 120 vac, 1025 watts. Manufactured 1984. details
View Cart REQUEST PRICE QUOTE Tons: 12 Left to Right (in.): 12 Front to Back (in.): 12 Manufacturer: CARVER 40815004 Used- Carver Manual Hydraulic Press, 12 ton, Model 2696. Hand operated for 0-12 tons (24,000 pounds). (2) 12" x 12" electrically heated, water cooled platens. Ram stroke 5.1", daylight opening 1'' to 15''. details
View Cart REQUEST PRICE QUOTE Tons: 75 Left to Right (in.): 18 Front to Back (in.): 18 Manufacturer: Wabash 40747001 Used- Wabash 75 Ton Hydraulic Press, Model 75-18-2TMAC. Platen size 18" x 18". Adjustable daylight opening 6-15". 7" stroke, 2" diameter tie rods, 463 PSI maximum pressure on platens. Electrically heated platens 9000 Watts. Driven by a 3 HP, 3/60/230/460 Volt, 1755 RPM motor. details
View Cart REQUEST PRICE QUOTE Tons: 12 Left to Right (in.): 1 Front to Back (in.): 1 Manufacturer: MULTIPRESS 40657023 Used- Multipress, Model W3T120M, 12 tons. Includes a Model IT06-6 index table with time delay, and stainless steel platens. details
View Cart REQUEST PRICE QUOTE Tons: 500 Left to Right (in.): 85 Front to Back (in.): 44 Manufacturer: Erie 40514001 Used-500 ton Erie mill, 85" left to right x 44" front to back up-acting slab side hydraulic press. Approximate 36" daylight, 16" stroke, 24" diameter single acting ram. Approximate press speeds 125 ipm closing, 9 ipm pressing. Hydraulic power unit includes (1) 25 hp, 3600 rpm motor with a high volume centrifugal pump, 225 gpm low pressure; (1) 30 hp, 1200 details
View Cart REQUEST PRICE QUOTE Tons: Left to Right (in.): Front to Back (in.): Manufacturer: Sanko 40268001 Used: Sanko hydraulic lamination system. 28 x 40 sheet size, approximately 150 sheets per hour, 15 openings. 10 sheets per book, scissor lift for loading and unloading, Used for plastic card manufacturing 6' x10' x 3'. 480V, 40 amps. details
View Cart REQUEST PRICE QUOTE Tons: 30 Left to Right (in.): 24 Front to Back (in.): 24 Manufacturer: carver 40108001 Used:Carver 4 post manual hydraulic press, model 4902, 30 ton clamp force capacity. (2) 24'' x 24'' electrically heated, water cooled platens, rated to 650 deg.f.. 6'' ram stroke, 1-4'' daylight opening. Includes a control panel with (2) Watlow digital controllers. Serial# 4902-1,Built 2004. details
View Cart REQUEST PRICE QUOTE Tons: 50 Left to Right (in.): 12.5 Front to Back (in.): 12.5 Manufacturer: PHI 40101001 Used:PHI Multi Layer 50 ton upacting hydraulic compression press, model SB534C-MS-X19-24.(5) cored platens 12 5/8'' left to right x 12 5/8'' front to back. Includes a X19 Automatic Data Logger, 1 1/2hp, 3/60/480 volt,1200 rpm motor, and temp controllers.18265 hours on meter. details
View Cart REQUEST PRICE QUOTE Tons: Left to Right (in.): Front to Back (in.): Manufacturer: 40023001 Used: Carver Auto "C" two post hydraulic press.Model 38894D1000.15 Ton capacity. 6'' x 6'' heated platen. 6'' stroke.0''-15'' daylight. mfg. in 1995 details
View Cart REQUEST PRICE QUOTE Tons: 1 Left to Right (in.): Front to Back (in.): Manufacturer: Carver 523882 USED: Carver press, model M. details
View Cart REQUEST PRICE QUOTE Tons: 15 Left to Right (in.): 26 Front to Back (in.): Manufacturer: TMP 88946 USED: TMP (Technical Macine Products) hot platen laminating vacuum press, 15 ton. Floor standing slab side upstroke type. 16" x 34" platen, (2) hot plates 16" x 34", drilled for oil heating, 16" max daylight. Main ram diameter 7"/4" at 780 psi. 0-9" stroke. Distance between slab sides 26" left to right. Includes control panel, free standing hydraulic power unit details
View Cart REQUEST PRICE QUOTE Tons: 50 Left to Right (in.): 12.5 Front to Back (in.): 12.5 Manufacturer: PHI 88202 USED: PHI manual compression press, approximate 50 ton. Up acting cylinder. 12-1/2" x 12-1/2" electrically heated platens. Approximate 6" to 10" adjustable daylight. 0-6" stroke. Includes control panel. details
View Cart REQUEST PRICE QUOTE Tons: Left to Right (in.): Front to Back (in.): Manufacturer: Dake 87749 USED: Dake hydraulic lab press, model 44-479. Electrically heated platen, 2 hp hydraulic drive, 8000 watts, 3/60 operation. details
View Cart REQUEST PRICE QUOTE Tons: 150 Left to Right (in.): Front to Back (in.): Manufacturer: Simac 85022 USED: Simac Densomatic dry bag isostatic press, model 3/150/800C, approx 150 ton. Automatic cycle, hydraulic pressure 3000 psi max, clamp pressure 2900 psi max, operating pressure 11,600 psi max. 3/60/480 volt, 63 kw. Built 1998. details
View Cart REQUEST PRICE QUOTE Tons: 6 Left to Right (in.): Front to Back (in.): Manufacturer: Pentronix 84710 USED: Pentronix 3 mode compacting press, 6 ton, model 602. Minimum 20 strokes per minute, maximum 120 strokes per minute. Maximum part thickness 0.520", diameter 1.250". 80 psi air requirement at 20 scfm, upper ram stroke 1.75". Driven by an approximate 1.5 hp varispeed motor. Includes a free standing control panel and conveyor. details
View Cart REQUEST PRICE QUOTE Tons: 150 Left to Right (in.): 78 Front to Back (in.): 42 Manufacturer: Heim 82592 USED: Heim 150 ton straight side double crank press air clutch and brake, model S-150. Air counter balances tie rod construction. Stroke 6", slide adjustment 6", shut height S.D.A.U. 12", area of bed 78" L-R x 42" F-B, bed opening 71" L-R x 24" F-B, bolster thickness 5-3/4", area of slide 76" L-R x 30" F-B, windows 22" F-B, floor to top of bed 38-1/2", details
View Cart REQUEST PRICE QUOTE Tons: 300 Left to Right (in.): Front to Back (in.): Manufacturer: Bruno 82549 USED: Bruno Machinery roll feed die cutting press, model RS7, approx 300 ton. 84" wide x 69" long table area, upacting. Includes (2) 84" wide x 10' long feed and take-off table, operator's control panel an and approx 20 hp varispeed motor. details
View Cart REQUEST PRICE QUOTE Tons: 314 Left to Right (in.): Front to Back (in.): Manufacturer: French Oil 520990 USED: French Oil slab side compression molding machine. With PLC controls 4 station hydraulic manifolds. Three zone electric heatedplatens 24 x 24. (1) 4 cicuit power pack, 30 hp motors/29 gpmpressure compensated pumps. Mounted on 350 gallon res, with self-contained cooling pack. (1) Erie 24 x 24 slab side press (stripped).(1) high capacity tilt tumbler, details
View Cart REQUEST PRICE QUOTE Tons: 314 Left to Right (in.): Front to Back (in.): Manufacturer: French Oil 520991 USED: French Oil slab side compression molding machine. With PLCcontrols 4 station hydraulic manifolds. Three zone electric heatedplatens 24 x 24. (1) 4 cicuit power pack, 30 hp motors/29 gpmpressure compensated pumps. Mounted on 350 gallon res, with self-contained cooling pack. (1) Erie 24 x 24 slab side press (stripped).(1) high capacity tilt tumbler, details
View Cart REQUEST PRICE QUOTE Tons: 300 Left to Right (in.): Front to Back (in.): Manufacturer: Hepburn 77594 USED: Hepburn Machinery 300 ton Paradyne Plus press. Daylight 30" max,platen size 36" x 36". Horizontal sliding bolster travel speed 1,500inches per minute. Time to trave 1/8" (1) second or less.Programmable velocity 2,100 inches per minute - advance and return.3/60/480V, 60 hp hydraulic pump motor. Weight 28,900 lbs excludinghydraulics. details
View Cart REQUEST PRICE QUOTE Tons: 3 Left to Right (in.): Front to Back (in.): Manufacturer: Kenco Taber 74626 USED:Kenco Taber forming/cut-off press, 3 ton, model 3K-7-125.7" frame opening, 380 spm. Driven by a 3/4 hp, 1/60/115 volt motor.Digital controls. Mounted on a table. details
View Cart REQUEST PRICE QUOTE Tons: 200 Left to Right (in.): 25 Front to Back (in.): 24 Manufacturer: Eemco 73712 USED: Eemco 200 ton upstroke hydraulic molding and laminating press,slab side design, floor standing. Distance between slab sides 25" leftto right. Platen area 25" L-R x 24" F-B. Stroke of platen 0-10" max.Max daylight opening 12.5", daylight opening between hot plates 3.5"max. (2) 18" x 18" x 1.5" thick electrically heated hot plates, drilled for liquid details
View Cart REQUEST PRICE QUOTE Tons: 150 Left to Right (in.): 14.5 Front to Back (in.): 15 Manufacturer: Hoffman 70245 USED:Hoffman Brothers hydraulic press, 150 ton, model P-150. Platensize 14-1/2" left to right x 15" front to back, single ram, approx 8"daylight, 60 hz/220 volt, 15/20 amp, approx 10 hp motor. details
View Cart REQUEST PRICE QUOTE Tons: 80 Left to Right (in.): 17.687 Front to Back (in.): 17.687 Manufacturer: Schwabenthan 68409 USED: Schwabenthan press 80 ton, model Polystat 400S. Platen size17-11/16" front to back x 17-11/16" left to right. (4) 2-1/4"diameter posts. Distance between posts 19-1/2" left to right x 11-1/2"front to back. Approx daylight 8". Single ram hydraulically driven,table mounted controls. details