|
|
522632
USED: Drais Gelmat compounder, model G10S. 316 Stainless steelconstruction, jacketed bowl and end plate rated 45 psi, 10 liternominal capacity, 8 liter batch capacity, pneumatically operatedflush type bottom discharge valve, direct coupled 150 hp, 230/460volt, 3600 rpm motor, with 1 cu ft stainless steel product surge hopper with pneumatic ram assist. On details
|
83113
USED: Baker Perkins 100mm compounding/pelletizing line consisting of: (1) Baker Perkins 100mm co-rotating twin screw continuous mixer, model MPC/V. 55" long clam shell design barrel, oil heated. Driven by a 125 hp, 500 volt, 1750 rpm DC motor with reducer. (1) Approx 6" extruder with approx 100 hold strand die, driven by a 20 hp, 500 volt, 1750 rpm DC motor. details
|
|
|
82711
USED: 55mm Buss Ko-Kneader, 8:1 L/D, driven by a 40 hp AC motor with inverter. Has Panelview touch screen operator control and includes main electrical panel. Serial #453586-2, sales #98/453580, model PCS558D. Has liquid heated barrel. Includes (2) Mokon temperature controllers. Includes Brabender side feeder and is also equipped with 2" diameter top details
|
81483
USED: 40 liter Draiswerk Gelmat intensive compounder. 50 lb batch based on 35 lb per cu ft material. Unit is direct connected to 600 hp 1150/1750 rpm DC motor with Saftronics DC motor controls, 50/60 hz, 575 volt AC input. Includes stainless steel replaceable lined chamber with stainless steel 6 wing rotor. Rotor equipped with hardened surfacing on each details
|
79506
USED: Buss-Condux single screw extrusion system consisting of: (1) Buss-Condux 7" diameter single screw extruder, type GS180, 11:1L/D, oil heated, water cooled, end cutting unit. Driven by a 75 hp DCmotor with reducer, ratio 29.46:1. (1) Buss-Condux 5-1/2" diameter single screw side extruder, type RS140, driven by a 5.38 kw (7.5 hp)gearmotor. (1) Beringer 12" details
|
78903
USED: Farrel internal mixing and extrusion system, type CP12,consisting of (1) Farrel continuous mixer, 10:1 L/D. Material of construction is carbon steel on product contact parts. 5.6 kw motor feeding (1) Farrel single screw extruder, electrically heated. Screw speed 60 rpm by a 3.3 hp/2.2 kw motor, 2 strand die head. Includes(1) Tebunus type 2139 details
|
519309
USED: Torrence Machine & Tool, Mokena IL, #4 continuous mixer with a4.5" dump extruder. (This unit is a copy of a Farrel.) Equipped with(2) 4" diameter screws, chrome plated #15 standard rotors. Split casejacketed mixing chamber. 40 hp DC motor. Full control panel. 4.5" dumpextruder with DC drive, 22" long jacketed barrel. 15 hp drive, swinggate at end of details
|
519207
USED: Buss extruder. This unit has a clamshell barrel, 5.75" diameter,5.5" round feed throat and 40.5" from end of barrel to center of feedthroat. The end of barrel has a bolt-on gate. There is a crammerfeeder equipped with 7.5 hp 230/460 volt V-belt motor gear reduceddrive. Hopper approx 42" diameter x 50" tall. The extruder has a125 hp US electric DC details
|
72857
USED: PVC compounding line consisting of: 1 Stewart Bolling spiralflow intensive mixer, model #4, double wing cored rotors, capacity 125 pounds at 1.25 gravity, single ram force feed, driven by a 200 hp motor thru a reducer; 1 Adamson United 2 roll sheeter mill, model 22"x22"x60" long, cored rolls, end guides, driven by a 100 hp motorthru a reducer; details
|
|
|
72186
USED: Farrel continuous mixer, model #9 FCM. Cored #15 style rotors with rotary unions, 1881 cu in mixing chamber. Rated approx up to10,000 pounds an hour. Driven by a 600 hp DC motor thru a Farrel gearbox with SCR motor controller, lube and hydraulic system, and temp controllers. Mounted on a base. details
|