|
|
|
|
|
|
More Info
Width (in.): 7.87
Diameter (in.): 5.5
Manufacturer: HAAKE
41817001
Used- Haake Rheomex Lab Cast Film Line With OCS Film Analyzer. (1) 3/4" Haake Lab Extruder, 24:1 L/D Ratio, Model 27-13-100. 6 Eurotherm 2132 temperature Controls, Dynisco Pressure Transducer, 6" Adjustable Die, stainless steel hopper, with OCS CR7 Chill Roll & Winder Unit, 2 Chill Rolls, Driven by 0.25 kw motor, 140mm Chill Roll Diameter, 200mm Width, details
|
More Info
Width (in.): 7.87
Diameter (in.): 5.4
Manufacturer: HAAKE
41817002
Used- Haake Rheomex Lab Cast Film Line. With OCS Film Analyzer. (1) 3/4" Haake Lab Extruder, 24:1 L/D ratio Model 27-13- 100. 6 Eurotherm 2132 temperature controls, Dynisco Pressure Transducer, 6" Adjustable Die, stainless steel hopper, with OCS CR7 Chill Roll & Winder Unit, 2 Chill Rolls, Driven by 0.25 kw motor, 140mm Chill Roll Diameter, 200mm Width, details
|
More Info
Width (in.): 94
Diameter (in.):
Manufacturer: Davos Standard
10151020
Used-Davis Standard Extrusion Coating Package designed to make 40" to 85" finished web width. Line rated at 400 feet per minute mechanical line speed. Unit was last used for .01" of low density of PE coating on 85" fabric at 170 feet per minute. Line uses approximately 1200 amps at 460 volt, 3 phase, 60 cycle. Requires 80 psi of plant air and a 50 ton chiller. details
|
|
|
|
|
|
|
|
|
|
|
|
|
More Info
Width (in.):
Diameter (in.):
Manufacturer:
40555001
Used- Cast Film Line, 14'' wide, consisting of: (1) Egan 2 1/2'' single screw extruder, approximately 32 to 1 L/D ratio. 5 zone electrically heated, water cooled, non-vented barrel with closed loop system with tank, pump, and heat exchanger. Driven by a 60 hp, 500 volt, 1750/2100 rpm DC motor thru a gearbox, ratio 11.06 to 1. (1) Manual screen changer. details
|
More Info
Width (in.): 12
Diameter (in.): 8
Manufacturer: Killion
87157
USED: Killion 12" Wide Cast Film Take Off. (1) 8" diameter x 12" wide chrome plated cored roll. (2) 5" diameter x 12" wide pull rolls, (1) rubber, (1) metal, pneumatically adjustable, all driven by a 1/2 hp, 180 volt, DC gearmotor with a Bronco drive. (1) Approximate 12" wide single turret winder, driven by a 1/4 hp DC gearmotor. Includes a Killion approximate details
|
|
|
More Info
Width (in.): 8
Diameter (in.): 8
Manufacturer: Killion
83949
Used- Killion 8" wide cast film lab chill roll stand with (1) 8" wide x 8" diameter chrome plated chill roll cored; (2) 5" diameter x 8" wide pull rolls, (1) rubber, (1) metal, pneumatically adjustable, driven by a 1/2 hp 180 volt DC gearmotor with a Bronco drive. Unitized single turret wind driven by a 1/4 hp DC gearmotor. Also includes (1) 6" wide vertical details
|
|
|
More Info
Width (in.): 40
Diameter (in.): 3.5
Manufacturer: Egan
79203
USED: Egan 40" cast film line consisting of: (1) Egan 3.5" extruder, 20:1 L/D ratio, electrically heated, water cooled, 100 hp main drive motor with SCR controller, 16.94:1 gearbox ratio. (1) 11 zone digital temp control panel. (1) Foremost crammer feed unit. (1) 3.5" hydraulic slide plate screen changer. (1) Black Clawson 40" cast film die, size 300XL-40, details
|
More Info
Width (in.): 40
Diameter (in.): 3.5
Manufacturer: Egan
79204
USED: Egan 40" cast film line consisting of (1) Egan 3.5" extruder, 20:1 L/D ratio, electrically heated, water cooled, 100 hp main drive motor with SCR controller, 16.94:1 gearbox ratio. (1) 11 zone digital temp control panel. (1) Foremost crammer feed unit. (1) 3.5" hydraulic slide plate screen changer with power unit. (1) Black Clawson 40" cast film details
|
More Info
Width (in.): 32
Diameter (in.): 12
Manufacturer: Reifenhauser
78324
USED: Reifenhauser cooling unit for cast film. (1) 12" diameter x 32" straight side (304 mm diameter x 812 mm straight side) polyester roll, (1) 18" diameter x 32" straight side (457mm diameter x 812mm straight side) cored cast roll, (1) 6" diameter x 32" straight side (152 mm diameter x 812mm straight side) cored cast roll. Complete with motor and details
|
More Info
Width (in.): 28
Diameter (in.): 24
Manufacturer: Waldron
72993
USED:Two (2) roll casting unit consisting of: (1) Waldron Hartig casting unit, serial #KC8560-10; (1) 24" diameter x 28" wide cored chrome plated roll; (1) 7" diameter x 28" wide cored chrome plated tension roll, driven by an approximate 5 hp motor; (1) 24" x 24" wide roll; (1) Egan pull roll stand, serial #J007165-01; (1) rubber, (1) chrome roll, 7-1/2" diameter details
|
More Info
Width (in.): 54
Diameter (in.): 24
Manufacturer: EGAN
37916
Used- Egan Extrusion Coating/Casting Station, 54'' Wide. Includes 24" diameter x 54" wide casting roll, cored for heating or cooling ( no rotary union). Quick coupling for quick roll change. Roll is gear driven by approximate 5 hp DC motor but no SCR control. Includes operator control panel and tension control panel with (3) 42" wide rolls in load cell details
|