40544004
Used- Littleford batch type plow mixer, model FM-130-D, 304 stainless steel. 3 cubic feet working capacity, 4.6 total. Carbon steel jacketed chamber 19" diameter x 26" long, rated 75 psi at 320 deg F. 2" diameter shaft with (2) bolt on "T" paddles, (2) bolt on end scrapers. Driven by a 10 hp, 3/60/230/460 volt, 1735 rpm motor. Includes a 10 hp, 3/60/230/460 details
|
40530001
Used- Lodige plow mixer, model H600, 304 stainless steel. 11 cubic feet working capacity, 21.2 total. 32" diameter x approximate 49" long, 304 stainless steel, jacketed chamber. Approximate 3 1/2" diameter shaft with (3) welded plow blades and (2) welded end scrapers. Equipped with (2) 10 hp, 3/60/230/460 volt, 3530 rpm chopper motors with tulip blades. details
|
40388002
Used- Lodige plow mixer, type FKM15000D-12ZF. Material of construction is 316TI (1.4571) stainless steel on product contact parts. Total capacity 529 cubic feet (15,000 liter), working capacity 388 cubic feet (11,000 liter). Not jacketed. Driven via a 340 kw Flender SWD gearbox. Prepared for 12 choppers. Overall dimensions: 20'5" long x 8'3" wide x 8'2" details
|
40175001
Used: Littleford plow mixer, model FM-130-D, batch type. 3 cubic foot working capacity, 4.6 total, 304 stainless steel. Carbon steel jacketed chamber 20" diameter x 26" straight side, 2 bolt on plow blades, 2 bolt on end scrapers. Main drive is a 10 hp, 3/60/230/460 volt, 1755 rpm motor thru a reducer.
Includes (1) 10 hp, 3/60/460 volt, 3470 details
|
REQUEST PRICE QUOTE
Cubic Feet: 60
Manufacturer: Scott
Model: SPPM547SS
Material: Stainless Steel
10992000
Used Scott Model SPPM547SS horizontal cylindrical plow type mixer. 60 cubic foot stainless steel. Blender has two 10 hp high speed choppers, air seals, 40 hp main motor, electical lock out system, 2 access doors, top center inlet, support platform, and approx 10in center pnuematic slide discharge valve. 230/460 Volt (currently wired 460 V) details
|
40167001
Used: Littleford plow mixer, model FKM-8000-D, 304 stainless steel. Nominal working capacity 85 to 197 cubic feet, 282 total. Non jacketed mixing chamber 62'' diameter x 158'' long. 8'' diameter shaft with (8) bolt on plows, (2) end scrapers. Provision for (6) choppers, (3) installed, each driven by a 10 hp, 3/60/230/460 volt, 3530 rpm motor. Air seal details
|
40139001
Used- Littleford plow mixer, model FKM-4200D, batch type. 86.9 cubic feet working capacity, 148.2 total, 316 stainless steel. 2 zone stainless steel jacketed chamber approximately 50" diameter x 135" straight side. 5" diameter shaft with 10 welded on plow blades, 2 end scrapers. Driven by a 150 hp, 3/60/460 volt, 1775 rpm XP motor thru a Maxum reducer, details
|
40139003
Used- Littleford/Lodige plow mixer, model FKM-1200E, batch type. 26.1 cubic feet working capacity, 43.4 total, 304 stainless steel. Non-jacketed chamber approximately 38" diameter x 65" straight side. 6" diameter shaft with 6 welded on plows, 2 end scrapers. Driven by a 50 hp, 3/60/230/460 volt, 1775 rpm XP motor thru a Falk reducer, ratio 11.45 to 1, details
|
REQUEST PRICE QUOTE
Cubic Feet: 11
Manufacturer: Littleford
Model: FKM600D
Material: 304 stainless steel
90547
USED: Littleford plow mixer, model FKM600D, 304 stainless steel. 11 cubic feet working capacity, 21.2 total. 30" diameter x approximate 50" long carbon steel jacketed chamber, rated 75 psi at 320 deg F. Internal rated FV at 320 deg F. Approximate 5" diameter shaft with (4) bolt-on plow blades and (2) end scrapers. Equipped with (2) 10 hp, 3/60/230/460 volt, details
|
90583
USED: Processall lab size plow mixer, model 4 H/V, 304 stainless steel. 2 liter working capacity, 4 total. Non-Jacketed chamber 6" diameter x 9" deep. 4 welded on plow blades and 1 bottom chopper. Plow blades driven by a 1 HP, 3/60/208-230/460 volt, 1725 RPM Motor. Chopper driven by a 1 HP, 3/60/208-230/460 volt, 3450 RPM motor. Mounted details
|
REQUEST PRICE QUOTE
Cubic Feet: 21.2
Manufacturer: AMK
Model: VI S 600/III
Material: stainless steel
524043
USED: AMK mixer, type VI S 600/III. Total capacity 21.2 cubic feet(600 liters), carbon steel jacketed bowl, pressure 1.5 bar. Drivenby an approximate 15 hp/11 kW/380 volt/50 cycle/3 ph variable speed(12-60 rpm) motor. Vacuum style, excluding vacuum pump, outlet valve(200 x 200 mm) NW 200 pneumatic activated, stainless steel productcontact areas (1.4541), details
|
REQUEST PRICE QUOTE
Cubic Feet: 12.9
Manufacturer: Littleford
Model: FKM600D
Material: stainless steel
524024
USED: Littleford mixer, model FKM 600D. All stainless steel construction including shell, jacket, ends, bearing housings, legsand control panels, sanitary design with welded plow blades. 21.9cubic foot total capacity, 12.9 cubic foot working capacity. Jacketrated 75 psi and full vacuum @ 320 deg F, air purge seals, 15 hp460 volt main drive, on stands with details
|
REQUEST PRICE QUOTE
Cubic Feet: 42
Manufacturer: Littleford
Model: FKM1200E
Material: stainless steel
523962
USED: Littleford model FKM1200E, 1200 liter (or 42 cubic foot) totalcapacity plow mixer. 36" ID x 66" long stainless steel interior, mixing chamber with 4 paddles mounted on a 6" diameter shaft and 2side mounted, 5 hp, high speed choppers. Has 4 top ports, 2 flanged,a 19"OD - 15"ID charge port, 14"OD - 10"ID vent port, and 2 threaded2-1/2" OD ports. details
|
REQUEST PRICE QUOTE
Cubic Feet: 3
Manufacturer: Littleford
Model: FM-130-D
Material: 304 stainless steel
89743
USED: Littleford Lodige plow mixer, model FM-130-D, 304 stainless steel. 3 cubic feet working capacity, 4.6 total. Carbon steel jacketed chamber 20" diameter x 27" long, rated 75 psi at 338 deg F. 2" diameter shaft with (2) bolt-on "T" paddles, (2) end bolt-on scrapers. Driven by a 5 hp, 3/60/220/440 volt, 1740 rpm motor. Includes a 5 hp, 3/60/208-220/440 details
|
|
|
REQUEST PRICE QUOTE
Cubic Feet: 3
Manufacturer: Littleford
Model: FM130
Material: stainless steel
523811
USED: Littleford 130 liter stainless steel high intensity mixer,model FM130. This unit is reported to be in superb condition andfeatures complete stainless steel construction including supportbase. The unit features integral controls mounted to the blenderand the unit has a working capacity orf 3 cubic feet and a totalcapacity of 4.6 cubic feet. Currently details
|
REQUEST PRICE QUOTE
Cubic Feet: 3
Manufacturer: Lodige
Model: FM-130-D/1Z
Material: CARBON STEEL
89367
Used: Lodige plow mixer, model FM-130-D/1Z, carbon steel. 3 cubic feet working capacity, 4.6 total. Chamber 20" diameter x 26" long. 2 3/4" diameter shaft with (2) bolt on plows, (2) end bolt on scrapers. Driven by a 4kw (5 hp), 3/50/380/220 volt, 960 rpm motor. Includes an approximate 5.5 kw (7.5 hp) chopper motor with tulip style blades. Top access details
|
|
|
|
|
REQUEST PRICE QUOTE
Cubic Feet: 148
Manufacturer: Littleford
Model: KM6000
Material: 316L stainless steel
87739
USED: Littleford mixer, model KM6000 D, 316L stainless steel construction, 212 cu ft total capacity, 148 cu ft working capacity, rated 5 PSI and full vacuum internal at 331 F 304L stainless steel jacket rated 90 PSI at 331 F, cored shaft with rotary union, provision for (6) choppers less choppers, end discharge with valve and center bottom outlet, 200 HP details
|
REQUEST PRICE QUOTE
Cubic Feet: 148
Manufacturer: Littleford
Model: KM6000
Material: 316L stainless steel
87740
USED: KM6000 D Littleford mixer, 316L stainless steel construction, 212 cu ft total capacity, 148 cu ft working capacity, rated 5 PSI and full vacuum internal at 331 F 304L stainless steel jacket rated 90 PSI at 331 F, cored shaft with rotary union, provision for (6) choppers less choppers, end discharge with valve and center bottom outlet, 200 HP 460 details
|
|
|
87260
USED: Servar-Lodige type plow mixer. Material of construction is stainless steel on product contact parts. Total capacity 5.3 cubic feet (150 liter). Working capacity 3.5 cubic feet (100 liter). 17.6" diameter x 46.8" straight side (450mm x 1200mm) mixing body with (4) 14.6" x 10.9" (375mm x 280mm) inspection doors. Becker plows. Driven via gearbox by a 6 hp/4 details
|
REQUEST PRICE QUOTE
Cubic Feet: 12
Manufacturer: Littleford
Model: KM-600-D
Material: carbon steel
522926
USED: Littleford continuous mixer, model KM-600-D. 25 hp, 1775 rpmdrive motor with Falk shaft mount speed reducer, model 2215J-09,ratio 8.997:1. Unit has four mounting brackets for choppers. Choppersare not included. Unit is carbon steel construction with replaceablemixing blades. Unit is 36" high. Inlet connection is 10" x 14" flanged. Outlet connection details
|
REQUEST PRICE QUOTE
Cubic Feet: 26.1
Manufacturer: Littleford
Model: FKM 1200 E
Material: 316 stainless steel
86947
USED: Littleford plow mixer, model FKM-1200-E, 316 stainless steel. 26.1 cubic feet working capacity, 43.4 total. Carbon steel jacketed chamber 38" diametere x 67" straight side, rated 75 psi at 320 deg F. Approximate 7" diameter shaft with (5) bolt-on plow blades and (2) end scrapers. Equipped with (2) 10 hp chopper motors with tulip style blades. details
|
REQUEST PRICE QUOTE
Cubic Feet: 26.1
Manufacturer: Littleford
Model: FKM-1200-E
Material: carbon steel
86791
USED: Littleford plow mixer, model FKM-1200-E, carbon steel. 26.1 cubic feet working capacity, 43.4 total. Non-jacketed chamber 38" diameter x 67" straight side. Approximate 5-1/2" diameter shaft with (6) bolt-on plow blades and (2) end scrapers. Equipped with (2) 10 hp chopper motors with blades. Openings: top 10", 16", (2) side access doors; 7" x 9" details
|
REQUEST PRICE QUOTE
Cubic Feet: 3
Manufacturer: Littleford
Model: FM-130-D
Material: 304 stainless steel
86761
USED: Littleford plow mixer, model FM-130-D, 304 stainless steel. 3 cubic feet working capacity, 4.6 total. Carbon steel jacketed chamber 20" diameter x 20" long, rated 75 psi at 320 deg F. 2" diameter shaft with (2) bolt-on "T" paddles, (2) end bolt-on plow blades with scrapers. Driven by a 7.5 hp, 3/60/230/460 volt, 1745 rpm motor. Includes a 10 hp, 3/60/230/460 details
|
REQUEST PRICE QUOTE
Cubic Feet: 2.35
Manufacturer: Draiswerke
Model: TR-100/ZSM
Material: 316 stainless steel
86695
USED: Draiswerke turbulent plow mixer/reactor, type TR-100/ZSM, 316 stainless steel. 2.35 cubic feet working capacity (3.53) total. Stainless steel jacketed chamber approximately 22" diameter X 22" straight side, bolt on flat hinged jacketed end, rated for pressure and vacuum. Approximately 4" diameter shaft with 4 welded plow blades and 1 end scraper. details
|
REQUEST PRICE QUOTE
Cubic Feet: 23.5
Manufacturer: Draiswerke
Model: KTM 1000
Material: 316 stainless steel
522640
USED: Drais/Lodige plow mixer, type KTM 1000. Material of constructionis stainless steel on product contact parts. Continuous unit. Totalcapacity 35.3 cu ft (1000 liter), working capacity 23.5 cu ft (667liter). Jacketed, rated for 60 psi (4 bar). (2) Choppers; prepared for(4) choppers. 70.5 hp/47 kw main drive. Frame mounted on legs. details
|
REQUEST PRICE QUOTE
Cubic Feet: 21
Manufacturer: Littleford
Model: FKM600
Material: stainless steel
522231
USED: Littleford plow mixer, model FKM600. Stainless steel construction, 21.0 cu ft total capacity (600 liter). 7.5 hp mainmotor, 220/440 volt, 3 ph, 60 hz. (2) 5 hp high speed choppers. Topinlets include (1) 14" flanged inlet and (1) 6". Bottom has a manuallyoperated flush bottom discharge. Approximately 50" discharge height. details
|
REQUEST PRICE QUOTE
Cubic Feet: 10
Manufacturer: Littleford
Model: FKM300
Material: 304 stainless steel
84688
USED: Littleford plow mixer, FKM300. 304 stainless steel, 6 cubic feet working capacity, 10 total. Carbon steel jacketed chamber 24" diameter x 40" straight side. Jacket rated 75 psi @ 320 deg F. Approx 3-1/2" diameter shaft with 4 bolt-on Hi-hard plow blaades and 2 end scrapers. Equipped with a 10 hp chopper motor. Mixer driven by a 25 hp, 3/60/230/460 details
|
REQUEST PRICE QUOTE
Cubic Feet: 10
Manufacturer: Littleford
Model: FKM300
Material: 304 stainless steel
84689
USED: Littleford plow mixer, model FKM 300, 304 stainless steel, 6 cu ft working capacity, 10 total. Carbon steel jacketed chamber 24" diameter x 40" straight side. Jacket rated 75 psi @ 320 deg F. Approx 3-1/2" diameter shaft with 4 bolt-on NI-hard plow blades and 2 end scrapers. Equipped with a 10 hp chopper motor. Mixer driven by a 25 p, 3/60/230/460 volt, details
|
REQUEST PRICE QUOTE
Cubic Feet: 42
Manufacturer: Littleford
Model: DVT-2000
Material: Stainless Steel
521771
USED: Littleford model DVT-2000 plow mixer. Horizontal chamber withdished ends. Stainless steel contact parts. 42 cu ft working capacity,71 cu ft total. 20 hp Siemens motor 3/60/230/460V, 45.4/22.7 amps(machine good for up to 50 hp) to Falk reducer model 1100FC3A. Ratio101.5, input rpm 1552, output rpm 15, service rating 20 hp, servicefactor 1.65. Bolt-on details
|
REQUEST PRICE QUOTE
Cubic Feet: 4.6
Manufacturer: Littleford
Model: FM-130-D
Material: 304 Stainless Steel
83126
USED: Littleford/Lodige plow mixer, model FM-130-D, batch type. 3 cu ft working capacity, 4.6 total, 304 stainless steel. Carbon steel jacketed chamber 20" diameter x 26" straight side, rated 75 psi at 320 deg F, 2" diameter shaft with 2 bolt-on plow blades, 2 end scrapers. Driven by a 5 hp, 3/60/230/460 volt, 1740 rpm motor. Includes (1) 5 hp, 3/60/230/460 details
|
REQUEST PRICE QUOTE
Cubic Feet: 388
Manufacturer: Lodige
Model: FKM15000D-12ZF
Material: Stainless Steel
521727
USED: Lodige plow mixer, type FKM15000D-12ZF. Material of construction is stainless steel on product contact parts. Totalcapacity 529 cu ft (15,000 liter), working capacity 388 cu ft(11,000 liter). Not jacketed. Driven via a 340 kw Flender SWD gearboxby a 160 kw XP motor. Prepared for 12 choppers. Overall dimensions:20'5" long x 8'3" wide x 8'2" high (6300mm details
|
REQUEST PRICE QUOTE
Cubic Feet: 388
Manufacturer: Lodige
Model: FKM15000D-12ZF
Material: Stainless Steel
521728
USED: Lodige plow mixer, type FKM15000D-12ZF. Material of construction is stainless steel on product contact parts. Totalcapacity 529 cu ft (15,000 liter), working capacity 388 cu ft(11,000 liter). Not jacketed. Driven via a 340 kw Flender SWD gearboxby a 160 kw XP motor. Prepared for 12 choppers. Overall dimensions:20'5" long x 8'3" wide x 8'2" high (6300mm details
|
REQUEST PRICE QUOTE
Cubic Feet: 388
Manufacturer: Lodige
Model: FKM15000D-12ZF
Material: Stainless Steel
521729
USED: Lodige plow mixer, type FKM15000D-12ZF. Material of construction is stainless steel on product contact parts. Totalcapacity 529 cu ft (15,000 liter), working capacity 388 cu ft(11,000 liter). Not jacketed. Driven via a 340 kw Flender SWD gearboxby a 160 kw XP motor. Prepared for 12 choppers. Overall dimensions:20'5" long x 8'3" wide x 8'2" high (6300mm details
|
REQUEST PRICE QUOTE
Cubic Feet: 388
Manufacturer: Lodige
Model: FKM15000D-12ZF
Material: Stainless Steel
521730
USED: Lodige plow mixer, type FKM15000D-12ZF. Material of construction is stainless steel on product contact parts. Totalcapacity 529 cu ft (15,000 liter), working capacity 388 cu ft(11,000 liter). Not jacketed. Driven via a 340 kw Flender SWD gearboxby a 160 kw XP motor. Prepared for 12 choppers. Overall dimensions:20'5" long x 8'3" wide x 8'2" high (6300mm details
|
REQUEST PRICE QUOTE
Cubic Feet: 388
Manufacturer: Lodige
Model: FKM15000D-12ZF
Material: Stainless Steel
521731
USED: Lodige plow mixer, type FKM15000D-12ZF. Material of construction is stainless steel on product contact parts. Totalcapacity 529 cu ft (15,000 liter), working capacity 388 cu ft(11,000 liter). Not jacketed. Driven via a 340 kw Flender SWD gearboxby a 160 kw XP motor. Prepared for 12 choppers. Overall dimensions:20'5" long x 8'3" wide x 8'2" high (6300mm details
|
|
|