More Info
Cubic Feet: 70.6
Material: 316L stainless steel
Manufacturer: Hosokawa
Model: MBXU-20 RVDW
10147027
Used-Hosokawa Nauta MBXU-20 RVDW Conical Dryer, stainless steel 316L (1.4404). Total capacity 148.15 cubic feet (4195 liters), working capacity 70.6 cubic feet (2000 liters). Maximum cone diameter 78" (1980 mm), cone height 107.2" (2723 mm), dished top, manhole diameter 19.7" (500 mm). Stainless steel arm, top drive, motor 10.5 hp/7.5 kW + 1 hp/0.75 kW, 180 details
|
|
|
More Info
Cubic Feet: 83
Material: Hastelloy
Manufacturer: Richard Stihler GmbH
Model:
42116002
Used-Richard Stihler GmbH & Co Apparatebau Vacuum Dryer, approximate 83 cubic foot/2550 liter working capacity. Material of construction is Hastelloy on product contact parts. Internal rated full vacuum (-1) and 90 psi (6 bar) at -22 to 392 deg F (-30 to 300 deg C). Jacket rated 290 psi (6 bar) at -22 to 392 deg F (-30 to 200 deg C). (1) 11.7" (300 mm) diameter details
|
More Info
Cubic Feet: 83
Material: 316 stainless steel
Manufacturer: Richard Stihler GmbH
Model:
42116001
Used-Richard Stihler GmbH & Co Apparatebau Vacuum Dryer, approximate 83 cubic foot/2550 liter working capacity. Material of construction is 316Ti (1.4571) stainless steel. Internal rated full vacuum (-1) and 90 psi (6 bar) at -22 to 392 deg F (-30 to 300 deg C). Jacket rated 290 psi (6 bar) at -22 to 392 deg F (-30 to 200 deg C). (1) 11.7" (300 mm) diameter details
|
More Info
Cubic Feet: 10
Material: 316 stainless steel
Manufacturer: Charles Ross
Model:
13342001
Used-Charles Ross & Son 10 Cubic Foot, 316 Stainless Steel, Nauta Mixer. 50" x 72" cone bottom, dished top. 230/460 volt, 3 ph, 3 amp, 12 amp, XP 1.5 hp, 1770 rpm, (2) Magnetek drive controller GPD 515. Jacket MAWP 100 psi @ 200 deg F, shell = full vacuum. Loaded on skid 6' x 10' x 64". details
|
|
|
More Info
Cubic Feet: 212
Material: SS
Manufacturer: HOSOKAWA MICRON
Model: 60-RB-5
41578048
Used- Hosokawa Micron Conical Nauta Mixer, Approximately 212 Cubic Feet Capacity (6000 liter), Model 60-RB-5, Stainless Steel. Welded dished top. Screw driven by a 22kw, 3/50/415 volt, 1465 rpm motor thru a gear box. Stainless steel orbital arm driven by an approximate 1.5kw, 3/50/415 volt motor and gear box. Disharge valve, with rotary valve. Includes aGericke details
|
More Info
Cubic Feet:
Material:
Manufacturer:
Model:
41578050
Used- Hosokawa Conical Nauta Mixer, Approximately 35.3 Cubic Feet Capacity (1000 liter), Stainless Steel. Approximately 68'' diameter x 85'' deep. Flat bolted top. Screw driven by a 2.6kw, 3/50/415 volt, 1705 rpm motor thru a gear box, ratio 83.98 to 1. Stainless steel orbital arm driven by an approximate 0.44kw, 3/50/415 volt, 1490 rpm motor and gear box, details
|
|
|
More Info
Cubic Feet: 105
Material: SS
Manufacturer: BOLZ
Model:
41172033
Used- Bolz Nauta Mixer/Dryer, 105 cubic feet working capacity (3,000 liter), stainless steel. Internal rated 5 bar/full vacuum (72 psi/FV) at 120 deg C (248 F). External stainless steel coil jacket, rated 4 bar (58 psi) at 120 deg C (248 F). Stainless steel ribbon type screw and stainless steel orbit arm. Main drive approximately 13/8.2 kw, 415 volt, details
|
More Info
Cubic Feet: 283
Material: HASTELLOY C276
Manufacturer: HOSOKAWA
Model: 35-HDC-54
41172037
Used- Hosokawa Micron Nauta Mixer/Dryer, Approximately 283 Cubic Feet (8024 liter) total capacity, Type 35-HDC-54, Hastelloy C276. Internal rated 2 bar/full vacuum (29 psi/FV). Stainless steel external jacket rated 3 bar (43 psi). Unit has top mounted dust filter. Has ball valve and rotary lock valve at discharge with Kek cone mill. Includes stainless steel details
|
More Info
Cubic Feet: 52.5
Material: stainless steel
Manufacturer: Nauta
Model: MBX525
40631001
Used-Nauta mixer, model MBX525, stainless steel. 52.5 cubic feet working capacity, 392.7 gallons. 76" diameter x 106" straight side. Bolt on top cover with 1/3 removable access and 12 x 18 hinged door, 6" diameter discharge, 12" diameter x 7' long screw. 20 hp auger motor, 230/460V, 1745 rpm motor. 1 hp, 230/460V stirrer motor. Reported to be reconditioned. details
|
More Info
Cubic Feet: 3.3
Material: 304SS
Manufacturer: J H Day
Model: MARK II 3.5
89833
Used- J H Day Nauta Mixer, 3.3 Cubic Feet working capacity, Mark II 3.5, 304 stainless steel. 39-7/8" diameter x 42-1/2" straight side. Dimple jacket rated 125 psi at 353 deg F. Internal rated vacuum to 27" mercury. Flat bolt down top cover with a 10" inspection door with cover. 10-1/2" diameter screw and orbital arm driven by a 3 hp, 3/60/230/460 volt, 1725 details
|
More Info
Cubic Feet: 10.5
Material: stainless steel
Manufacturer: Hosokawa
Model: 3VV-2
89370
USED: Hosokawa Micron Nauta Mixer, model 3VV-2. 10.5 cubic foot working capacity, stainless steel. 300 liter capacity, independent .5 hp, 230/460 volt, swing arm and screw drives. Jacketed chamber, flat bolt-on top with 10" arm hole. Openings: top 10", (2) 6"; 10" center bottom outlet clean out; 7-1/2" x 9-1/2" side bottom discharge with manual slide details
|
More Info
Cubic Feet: 1.75
Material: 304 stainless steel
Manufacturer: J H Day
Model:
86716
USED: J H Day Nauta Mixer, 1.75 cubic foot working capacity, 304 stainless steel. Approximately 28" diameter x 36" straight side. 2/3 dimple jacket rated 125 psi at 353 deg F, (2) 1/3 covers. Approximate 6" diameter non-supported screw driven by a 2 hp, 3/60/230/460 volt, 1145 rpm XP gearmotor. 6" center bottom outlet. Mounted on 3 carbon steel legs. details
|
More Info
Cubic Feet: 109.5
Material: stainless steel
Manufacturer: Bolz
Model:
522526
USED: Bolz mixer. Material of construction is polished stainlesssteel on product contact parts. Total capacity 109.5 cu ft/820 gallon(3100 liter). Working capacity 52.9 cu ft/396.8 gallon (1500 liter).Not jacketed. Inside rated for full vacuum (-1) and 52.5 psi (3.5 bar)Complete with motor and gearbox. details
|
|
|
More Info
Cubic Feet: 21
Material:
Manufacturer: Hosokawa
Model: NX6A-12
521758
USED: 21 cubic foot Hosokawa Nauta vacuum dryer/mixer, model NX6A-12. Dome top with misc inlets and sightglasses. Approximately 55" diameter at the top x approximately 73" long straight side. Outlet located at the bottom side of the cone wall. Stainless steel contact parts, carbon steel jacket. Shell design pressure approximately 29" hg, hydro test approximately details
|
More Info
Cubic Feet: 52.5
Material: Carbon Steel
Manufacturer: J H Day
Model: MB525
81123
USED: J H Day Nauta Mixer, model MB525. 52.5 cubic foot working capacity, carbon steel. Approximate 76-3/4" diameter x 102" straight side. Internal rated VAC/15 psi at 250 deg F, carbon steel jacket rated 100 psi at 338 deg F. Domed top. Approximate 12" diameter screw. Driven by a 15 hp, 3/60/575 volt, 1760 rpm gearmotor, ratio 2.8:1. Orbital arm drive details
|
More Info
Cubic Feet: 3.3
Material: Stainless Steel
Manufacturer: J H Day
Model:
76035
USED: J H Day vacuum Nauta mixer, 3.3 cubic foot working capacity (24.6 gallons), stainless steel. Approximately 37-3/4" diameter x 47" straight side, 1/3 top hinged cover. Internal rated 15 psi/FV at 353 deg F, jacket rated 125 psi at 353 deg F. Orbital arm driven by a 5 hp motor, 8" diameter non-supported screw. 2" center bottom outlet. details
|
More Info
Cubic Feet: 52
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX525
66229
USED: Nauta mixer model MBX525, 304 stainless steel, vacuum, 52.5 cubic foot working capacity (392.7 gallon). 76" diameter x 106" straight side, 63" section of carbon steel jacket, flat bolt-on cover with 14" diameter manway with cover, (2) 6" S.G., (3) 2" NPT, 6" diameter discharge, 12" diameter x 7' long screw. Unit equipped with bottom side lump breaker, details
|
More Info
Cubic Feet: 70
Material: Stainless Steel
Manufacturer: J H Day
Model: MBX700
63062
Used- Day Nauta Mixer Model MBX700. 70 cubic foot working capacity, stainless steel, non-jacketed. 83" diameter x 141" high. Flat 1/3 hinged top, 12" diameter screw mounted on pintle bearing driven by a 7.5 hp 208/1175 rpm motor. Arm drive 1.5 hp 208 Reeves variable speed motor. High speed chopper 5 hp 208/1740 rpm motor. Top openings: (1) 8", (1) 12", (1) details
|
More Info
Cubic Feet: 70
Material: Stainless Steel
Manufacturer: J H Day
Model: MBX
61717
USED: J H Day nauta mixer type MBX, 70 cubic feet. 304 stainless steel, 83" diameter x 122" long. Flat bolted top, pintle bearing. Top openings include (2) 12", (1) 9", (1) 18", 20" x 23" service door. Bottom openings (1) 8", (1) 9", (2) 10". Screw drive approximately 10 hp, 230-460. Orbit arm 2 hp 230-460 (gearbox missing tag). details
|
More Info
Cubic Feet: 141
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX40R
61010
USED: Nauta mixer, type MBX40R. Stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/50 cycle/3 ph/1500 rpm. Gear drive motor 1 hp, 500 volt/50 cycle/3 ph/ 66 rpm. (2) details
|
More Info
Cubic Feet: 141
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX40R
60648
USED: Nauta mixer, type MBX40R. Stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/ 50 cycle/3 ph/1500 rpm. Gear drive motor is 1 hp, 500 volt/50 cycle/ 3 ph/66 rpm. details
|
More Info
Cubic Feet: 141
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX40R
60649
USED: Nauta mixer, type MBX40R. Stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/ 50 cycle/3 ph/1500 rpm. Gear drive motor is 1 hp, 500 volt/50 cycle/ 3 ph/66 rpm. details
|
More Info
Cubic Feet: 141
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX-40R
49980
USED: Nauta Mixer, type MBX40R, stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/ 50 cycle/3 ph/1500 rpm. Gear drive motor is 1 hp, 500 volt/50 cycle/ 3 ph/66 rpm. details
|
More Info
Cubic Feet: 141
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX-40R
49981
USED: Nauta Mixer, type MBX40R. Stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/ 50 cycle/3 ph/1500 rpm. Gear drive motor is 1 hp, 500 volt/50 cycle/ 3 ph/66 rpm. details
|
More Info
Cubic Feet: 141
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX-40R
49984
USED: Nauta Mixer, type MBX40R, stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/ 50 cycle/3 ph/1500 rpm. Gear drive motor is 1 hp, 500 volt/50 cycle/ 3 ph/66 rpm. details
|
More Info
Cubic Feet: 141
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX-40R
49986
USED: Nauta Mixer, type MBX40R, stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/ 50 cycle/3 ph/1500 rpm. Gear drive motor is 1 hp, 500 volt/50 cycle/ 3 ph/66 rpm. details
|
More Info
Cubic Feet: 141
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX-40R
49988
USED: Nauta Mixer, type MBX40R, stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/ 50 cycle/3 ph/1500 rpm. Gear drive motor is 1 hp, 500 volt/50 cycle/ 3 ph/66 rpm. details
|
More Info
Cubic Feet: 141
Material: SS
Manufacturer: Nauta Mixer
Model: MBX-40R
49989
USED: Nauta Mixer, type MBBX40R. 316 stainless steel construction. 7'7" diameter x 11'5" straight side (2381 mm dia x 3550 mm st side). 141 cubic foot working capacity (4000 liter). Not jacketed and not rated for vacuum. In 3 sections bolted together. Main drive motor 15 hp, 500 volt/ 50 cycle/3 ph/1500 rpm. Gear drive motor is 1 hp, 500 volt/50 cycle/ details
|
|
|
More Info
Cubic Feet: 1.75
Material: Stainless Steel
Manufacturer: J H Day
Model: Mini
48620
USED: Day "Mini Mixer" Nauta Mixer, 1-3/4 cubic foot working capacity, 304 stainless steel. 27" diameter x 36" cone height. Brisco heating jacket, electric 3-3/4 watts with fiberglass insulation and outer stainless steel sheathing. 6-1/2" diameter stainless steel screw, 1-1/2 hp variable pulley drive 3/60/230-460V/1200 rpm (TEFC). 6" bottom outlet with details
|
|
|
More Info
Cubic Feet: 98
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBXU-35RWV
42285
USED: B.V. Nauta Mixer, 98 cubic feet, 316 stainless steel, type MBXU-35RWV vacuum unit. 90" diameter x 132" cone height. Jacketed, rated 10 psi at 212 deg F. Internal 191 psi/fv at 158 deg F. Bottom pintle bearing support. Bolt down dish top having (2) 12" (300 mm), (1) 20" (500 mm) openings. Screw drive 5 kw (6.7 hp), 1500 rpm XP. Orbit arm drive 0.55 details
|
More Info
Cubic Feet: 400
Material: Stainless Steel
Manufacturer: Nauta Mixer
Model: MBXE-100R
41391
USED: B.V. Nauta Model MBXE-100R Nauta mixer. 304 stainless steel, approximately 400 cubic feet. 140" diameter x 201" cone height. Flat 4 section hinged top cover with 23" flanged opening. Standard bottom support and universal joint. 16" diameter screw. Screw drive 24 kw (30 hp) 3/50/380V/1480 rpm. Orbit arm drive 1.5 kw (2 hp) 220/380V/3/50/1480 rpm. 12" x details
|
More Info
Cubic Feet: 25
Material: 304 stainless steel
Manufacturer: Vrieco
Model:
37443
USED: Vrieco nauta mixer, 25 cubic feet, 304 stainless steel. 4' diameter x 66" straight side. Flat bolt down top cover with 10" x 20" inspection door with cover, 4" x 8" opening. 9" diameter tangential nozzle for pneumatic feeding. 5 hp screw drive, 1/3 hp orbital arm drive. Carbon steel jacket, insulated cantilevered bottom support with 10" cbo. details
|
More Info
Cubic Feet: 35
Material: 304 Stainless Steel
Manufacturer: Nauta Mixer
Model: MBX350
37312
USED: Nauta Mixer MBX 350. 304 stainless steel, 35 cubic feet, 55" diameter x 84" straight side. Jacket top portion (water circulating only). Flat top cover, bolt down, 1/3 hinged. Bottom universal support. Standard bottom bearing. 8" x 10" hand operated discharge door. Carbon steel orbit arm. 3.7 kw, 5 hp screw drive. .37 kw, 1/2 hp orbit arm drive. details
|
|
|