Disperser Mixer Mixers

41779042
Used- Schold Concentric Triple Shaft Triaxial Disperser,  304 Stainless Steel. (1) High speed shear blade, driven by a 40 hp, 3/60/230/460 volt, 1800 rpm xp motor, speed range 0-1750 rpm, (1) Intermediate speed bar turbine blades, driven by a 15hp, 3/60/230/460 volt, 1200 rpm XP motor, speed range 0-600 rpm, (1) Low speed Anchor type blade with scrapers, driven details

41779046
Used- Schold Concentric Triple Shaft Triaxial Disperser,  304 Stainless Steel. (1) High speed shear blade, driven by a 40 hp, 3/60/230/460 volt, 1800 rpm xp motor, speed range 0-1750 rpm, (1) Intermediate speed bar turbine blades, driven by a 15hp, 3/60/230/460 volt, 1200 rpm XP motor, speed range 0-600 rpm, (1) Low speed Anchor type blade with scrapers, driven details

41779050
Used- Schold Concentric Triple Shaft Triaxial Disperser,  304 Stainless Steel. (1) High speed shear blade, driven by a 40 hp, 3/60/230/460 volt, 1800 rpm xp motor, speed range 0-1750 rpm, (1) Intermediate speed bar turbine blades, driven by a 15hp, 3/60/230/460 volt, 1200 rpm XP motor, speed range 0-600 rpm, (1) Low speed Anchor type blade with scrapers, driven details

41779077
Used- Schold Single Shaft Disperser. (2) 3 blade turbines  driven by a 10hp motor, speed range 50-150 rpm. Includes a can dust hood, can holder, and manual variable speed. details

41779080
Used- Schold Concentric Triple Shaft Triaxial Disperser,  304 Stainless Steel. (1) High speed shear blade, driven by a 40 hp, 3/60/230/460 volt, 1800 rpm xp motor, speed range 0-1750 rpm, (1) Intermediate speed bar turbine blades, driven by a 15hp, 3/60/230/460 volt, 1200 rpm XP motor, speed range 0-600 rpm, (1) Low speed Anchor type blade with scrapers, driven details

41779084
Used- Schold Concentric Triple Shaft Triaxial Disperser,  304 Stainless Steel. (1) High speed shear blade, driven by a 40 hp, 3/60/230/460 volt, 1800 rpm xp motor, speed range 0-1750 rpm, (1) Intermediate speed bar turbine blades, driven by a 15hp, 3/60/230/460 volt, 1200 rpm XP motor, speed range 0-600 rpm, (1) Low speed Anchor type blade with scrapers, driven details

41779163
Used- Schold Single Shaft Disperser. (2) 3 blade turbines  driven by a 7.5hp motor, speed range 50-150 rpm. Includes a can dust hood, can holder, and manual variable speed. details

41988001
Used-Hockmeyer Dual Shaft Disperser. 200 hp, 2000 gallon  stainless steel mixing tank. Manufactured 2003. details

41340001
Used-VEB Dissolver. Stainless Steel on product contact  parts including saw blade. Approximate 45 hp drive, 380V/50/3 electrical. Air over oil lift. Bolted floor mounted plate. details

41270015
Used- Kady Mill, Model 4A-C, 304 Stainless Steel. 250  gallon operating volume. 42'' diameter x 50'' deep stainless steel jacketed tank, rated up to 20 psi. Top 1/2 hinged cover with set in safety grate. Approximate 5'' diameter bottom rotor, and 8-1/2'' screen, 5200 rpm. Driven by a 75 hp, 3/60/230/460 volt, 1760 rpm motor. 3-1/2'' NPT off center bottom details

41154002
Used- Schold Dual Drive Coaxial Disperser. 56" long carbon  steel shaft. (1) High speed shear blade driven by a 100 hp, 3/60/575 volt, 1780 rpm motor, speed range 5930-1544 rpm, slow speed blade driven by a 40 hp, 3/60/575 volt, 1775 rpm motor, speed range 17-88 rpm. Will center in an approximate 66" diameter can. 5 hp hydraulic lift. Includes a control panel details

41154004
Used- Schold Co-Axial Single Motor Variable Speed Disperser,  Model 50. 48" long shaft with a sawtooth blade, speed range 100-2000 rpm. (1) Triple bowtie blade, speed range 20-490 rpm. Air/oil lift. Hand operated variable speed drive. Will center in approximate 52" diameter can. Driven by a 50 hp, 3/60/575 volt, 1770 rpm motor. Unit includes can holder and an details

40946001
Used- Morehouse Cowles Dual Shaft Disperser, Model  3/5HP, 304 stainless steel. (1) 1 1/4" diameter shaft with a 4" diameter sawtooth blade, driven by a 5 hp, 3/60/208-230/460 volt, 3480 rpm xp motor, (1) 1 1/2'' diameter shaft with a 3 blade anchor style agitator, driven by a 3 hp, 3/60/230/460 volt, 1730 rpm xp motor. Air over oil lift. Manual speed details

40901003
Used- Bowers High Speed Disperser, Model 720A. 2 1/4"  diameter x 48" long 304 stainless steel tapered shaft with a 12'' diameter 304 stainless steel blade. Will center in an approximate 48" diameter can. Approximate 42" rise to an overall height of 140''. Air/oil lift, tank holder. Hand operated variable speed pulley drive. Driven by a 30 hp, 3/60/575 details

40822002
Used- Myers Tank Mount Disperser, Model 600/800. 3"  diameter shaft with a 20" diameter sawtooth blade. Driven by a 10 hp, 3/60/230/460 volt, 1770 rpm motor. Includes an approximate 1000 gallon, 304 stainless steel tank, approximately 66" diameter x 70" straight side. Flat top with 2 piece top cover, 1 missing. Dish bottom with large indentation. details

40822004
Used- Schold Tank Mount Disperser, 3 1/2" diameter  shaft with a 20" diameter sawtooth blade. Rated speed 700-3000. Driven by a 50 hp, 3/60/230/460 volt, 1770 rpm varispeed motor. Includes an approximate 1000 gallon carbon steel tank. Approximately 65" diameter x 62" straight side. Flat top with a 1 piece hinged cover, dish bottom. 3 1/2" NPT center details

40822006
Used- Schold Tank Mount Disperser, 3 1/2" diameter  shaft with a 20" diameter sawtooth blade. Rated speed 700-3000. Driven by a 50 hp, 3/60/230/460 volt, 1770 rpm XP varispeed motor. Includes an approximate 1000 gallon carbon steel tank. Approximately 66" diameter x 58" straight side. Flat top with a 1 piece hinged cover, dish bottom. 3 1/2" NPT details

40734001
Used- Gruber Tech vacuum mixer, model GS2000, 304 stainless  steel. Dual stationary non-jacketed mixing cans, approximately 55 gallon, 500 pound capacity each. 28'' diameter x 24'' deep. Stainless steel mixing vessel lid with sight glass, contoured mixing blade. Mounted on a base. Includes a 7.5 hp, 3/60/208-230/460 volt, 1735 rpm hydraulic power pack, 1 hp, details

40491001
Used- Myers Disperser, Model LDA-2. 1 1/4" diameter  x 22" long 304 stainless steel shaft with a 3 1/2" diameter 304 stainless steel blade. Will center in an approximate 24" diameter can. Air over oil lift with an approximate 20" rise. Manually adjustable speed range. Driven by a 2 hp, 3/60/208-230/460 volt, 1725 rpm XP motor. Base mounted with can holder. details

40037442
Used- Kady Mill, Model 5C, stainless steel. Approximately  300 gallon capacity. 42'' diameter x 68'' deep jacketed tank. 8'' diameter bottom blade, driven by a 100 hp motor. (2) Side wall baffles, top entering agitator with (2) 4 blade turbines, driven by a 10 hp motor. details

40261005
Used- Kady International Top Entering Rotor-Stator  High Speed Dispersion Lab Mill, 316 stainless steel jacketed mixing can, 10 1/2'' diameter x 7'' deep, 2 piece top cover. Continuous thruput rates of 3 to 5 gpm, or batch operation 1 pint to 3/4 gallons. Driven by a 3 hp, 3/60/208-230/460 volt, 3450 rpm XP motor with an IDM AC drive. Base mounted. details

87913
USED: Jaygo Disperser, model HS1530. 2" diameter x  45" long 304 stainless steel shaft, no blade. Will center in an approximate 48" diameter can. Air/oil lift. 1/4 hp motorized variable speed pulley drive, speed range approximately 900-2400 rpm. Unit driven by a 15 hp, 3/60/230/460 volt, 1750 rpm motor. Base mounted. details

87704
USED: Kinectic Dispersion Corp Kady Mill, model 800B,  304 stainless steel. 800 gallon working batch capacity, 650 gallons per minute continuous capacity. 60" diameter x 74" deep stainless steel jacketed bowl, rated to 20 psig. Approximate 14" diameter rotor-stator dispersion head. 1/3 hinged bolt-on top cover with adjustable baffle. 4" off center bottom details

87485
USED: Tokushu Kika Disperser, model SL. 1-1/4" diameter  x 13" long tapered 329 stainless steel shaft with a 1-3/4" diameter sawtooth blade. Driven by a 1 hp, 3/60/230/460 volt, 3450 rpm XP motor. Unit stand mounted. Includes an approximate 8 gallon, 304 stainless steel, tank. Built 1995. details

86848
Used- Disperser, 2" diameter x 42" long tapered 17-4PH  stainless steel shaft with a 12" diameter carbon steel sawtooth blade. Will center in an approximate 48" diameter can. Air/oil lift. Hand operated variable speed. Driven by a 15 hp, 3/60/230/460 volt, 1740 rpm XP motor. Base mounted. details

85916
USED: Hockmeyer Disperser, model HV15. 1-3/4" diameter  x 50" long 304 stainless steel shaft, no blade. Will center in an approximately 50" diameter can. 360 degree rotation, 48" rise, air/oil lift, no tank. Hand operated variable speed pulley drive, speed range approximately 650-3200 rpm. Unit driven by a 15 hp, 3/60/208-220/440 volt, 1860 rpm XP motor. details

85920
USED: Hockmeyer Heavy Duty Disperser, model HVR-50.  3" diameter x 39" long 304 stainless steel shaft, 15" diameter style "G" blade. Will center in an approximately 56" diameter can. 360 degree rotation, 46" rise, air/oil lift. Mechanical variable speed, speed range approximately 400/2000 rpm. Unit driven by a 50 hp, 3/60/208-230/460 volt, 1175 rpm XP details

522217
USED: Ragogna dual shaft disperser with sweep blade.  Powered by 60 hp on the disperser and 20 hp on the sweep blade. Stainless steel shafts and blades. Air over oil hydraulic lift. Floor mounted. 54" lift height. 50" long shafts. details

84843
Used- Myers Heavy Duty Disperser, Model 800E-100-50.  3-1/2" diameter x 86" long stainless steel shaft with 22" diameter sawtooth blade. Will center in an approximate 78" diameter can. Speed range approximately 1500-5000 rpm. Maximum raised height 187". Driven by a 100 hp, 3/60/220 volt, 1770/885 rpm XP motor. 5 hp hydraulic lift power pack. Base mounted. details

84847
USED: Myers Heavy Duty Disperser, model 800-30. 2"  diameter stainless steel shaft with 16" diameter sawtooth blade. Will center in an approximate 56" diameter can. Manual variable speed, speed range approximately 1500-5000 rpm. Driven by an approximate 30 hp motor. Base mounted. details

83112
USED: Shar Disperser, 42" long stainless steel shaft,  hydraulic lift with pump, floor mounted. Driven by a 20 hp, 480 volt XP motor. details

82950
USED: Hockmeyer Tank Mount Dissolver, model TH150-2-C.  Approximate 4" diameter x 132" long stainless steel shaft with 24" diameter sawtooth blade. Driven by a 150/75 hp, 3/60/480 volt, 1775/885 rpm motor. Includes an approximate 850 gallon carbon steel mixing tank, 64" diameter x 60" straight side x 43" coned bottom. Top agitator bridge. details

82954
USED: Cowles Dissolver, model 720VHVX. 2-1/2" diameter  x 60" long stainless steel shaft with 18" diameter sawtooth blade. Will center in an approximate 68" diameter can. 270 degree swing, 150 to 600 gallon batch size, air/oil lift. Manual variable speed, speed range approximately 600-1350 rpm. Max raised height 147-3/4". Driven by a 50 hp, 3/60/460 volt, details

82956
USED: Myers Dissolver, model 800A-75. 3-1/2" diameter  x 48" long stainless steel shaft with 20" diameter sawtooth blade. Will center in an approximately 84" diameter can. 360 degree swing. Manual variable speed. Speed range approximately 1500-5500 rpm. Max raised height 156". Driven by a 75 hp, 3/60/230/460 volt, 1775 rpm XP motor. Base mounted. details

82959
USED: Hockmeyer Dissolver, model HVH20. 2" diameter  x 42" long stainless steel shaft, no blade. Will center in an approximate 48" diameter can. 360 degree swing, air/oil lift. Manual variable speed, speed range approximately 650-3200 rpm. Max raised height 100". Driven by a 25 hp, 3/60/230/460 volt, 1755 rpm XP motor. Base mounted. details

82667
USED: Meyers post mixer model 775A-7.5-2669. 4' stainless  steel shaft and 7" saw blade. 7.5 hp, 3 phase, 60 cycle, 230-460 volt, 3470 rpm XP motor. Air lift. Built 1998. details

82550
USED: Jaygo dual shaft mixer, model HLVARDS. (1) 1-1/4"  diameter x 16" long shaft with a 6" diameter sawtooth blade, driven by a 5 hp, 3/60/230/460 volt, 1725 rpm XP motor. (1) 1-1/2" diameter x 18" long shaft, no blade, driven by a 3 hp, 3/60/230/460 volt, 1725 rpm XP motor. Air over oil lift. Includes a tube holder. Will center in an approximately 16" details

81951
USED: Jaygo Variable High Speed Disperser, model HS7510.  (1) 2" diameter x 40" long stainless steel shaft with an 8" diameter sawtooth blade. Air/oil lift, 360 degree rotation, approximately 500-2500 rpm. Will center in an approximately 36" diameter can. Driven by a 7.5 hp, 3/60/230/460 volt, 1740 rpm XP motor. Manual speed adjust. Base mounted. details

81912
USED: Schold Co-Axial Single Motor Variable Speed Disperser,  model 50. (1) 3-3/4" diameter x 32" long shaft with a 12" sawtooth blade, speed range 490-3000 rpm. (1) triple bowtie blade, speed range 20-100 rpm. Air/oil lift. Approximate rise 45-57". Will center in approximate 48" diameter can. Driven by a 60 hp, 3/60/230/460 volt, 1770 rpm xp motor. Unit includes details

81914
USED: Myers Dual Shaft Mixer, model 550a-25-702. (2)  2-1/2" diameter shafts, (1) with a 10" diameter sawtooth blade. (1) triple bowtie style blade. Air over oil lift, approximate 60" rise. Driven by a 25 hp, 3/60/230/460 volt, 1765 rpm xp motor. Manual speed adjust handle unit includes a tub holder. Will center in an approximate 48" diameter can. details

81119
USED: Schold dissolver. 36" long tapered shaft with  an 18" diameter sawtooth blade. Will center in an approximate 40" diameter can. Air/oil lift, can holder. Hand operated variable speed pulley drive, speed range approximately 600-3000 rpm. Unit driven by a 40 hp, 3/60/220/440 volt, 1175 rpm XP motor. Base mounted. details

79211
USED: Daymax mixer, stainless steel, 200 gallon total  capacity, 160 gallon working, 42" diameter x 51" straight side. Dished top and bottom heads, carbon steel jacket rated 90 psi @ 129 deg F, 3 adjustable side wall baffles, driven by a 60 hp, off center bottom outlet. Mounted on stand. details

77141
USED: Myers triple shaft mixer, model 550A-3-3, stainless  steel. 3 approximate 2" diameter shafts. 1 Anchor low speed, approximately 50-200 rpm. 1 intermediate speed stainless steel auger, approximately 150-450 rpm. Low speed and sweep are shared drive, 3 hp, 3/60/230/460 volt, 1730 rpm motor. 1 high speed with 2 sawtooth blades, approximately 1200-4800 rpm, details

73862
USED: Daymax mixer, model 660, carbon steel. 660 gallon  total capacity, 550 working. 53" diameter x 64" straight side. Carbon steel 3 adjustable side wall baffles. Driven by an approximate 100 hp XP motor, Class 1 Group D, Class 2 Group F, G. 3" off center bottom outlet (no valve). Mounted on a 52" high stand. Unit requires a top cover and blade. details

73174
USED: Reynolds low speed mixer, pedestal mount. 25  hp 3/60/460V/1770 rpm with Reliance AC controller. Unit has a reversible helical rotor with UHMV scrapers. 50 gallon, 304 stainless steel dimple jacketed mix tank, jacket 60 psi. Air/oil hydraulic lift, 42" lift. 2 hp, 230/460V/1800 motor. 3 adjustable and removable baffles, 1 missing. 4" NPT end discharge. details

73047
USED: Hockmeyer single shaft disperser, model HHL-II-550.  3" diameter shaft with an 18" diameter sawtooth blade. Driven by a 75 hp, 3/60/460 volt, 1260 rpm XP motor, Class 1 Group D, Class 2 Group D. Unit includes a can lid and holder, Reliance drive panel, 2 Central Fabricators stainless steel dimple jacketed mixing cans with covers, rated 50 psi at 200 deg details

72175
Used- Cowles Dissolver, Model 830VHVX. Stainless steel  shaft and blade. Will center in a 72" diameter can. Capacities 300 to 700 gallon batches. Air/oil hydraulic lift with air tank. Approximate 48" rise. Driven by a 60 hp XP motor. details

72178
Used- Cowles Dissolver, Model 830VHVX. Stainless steel  shaft and blade. Will center in a 72" diameter can. Capacities 300 to 700 gallon batches. Air/oil hydraulic lift with air tank. Approximate 48" rise. Driven by a 60 hp XP motor. details

72180
Used- Kady Mill, Model 5C, Stainless Steel. Approximately  300 gallon capacity. 48'' diameter x 48'' deep tank. Approximately 6'' diameter bottom blade, driven by a 125 hp, 3/60/230/460 volt motor. Base mounted. details

71938
Used- Myers Dual Shaft High Speed Disperser, Model  L850, 304 Stainless Steel. (2) 1" diameter shafts, each with (2) 4" diameter overlapping sawtooth blades. Manual adjustable height approximately 11". Tilt back body. Belt driven by a 3 hp, 3/60/230/460 volt, 1745 rpm XP motor. Manual speed adjust handle. Speed range 1000 to 4800 rpm. Mounted on a carbon details

71251
USED: Myers dual shaft mixer, model L550A-2-984. (2)  1" diameter shafts, (1) with a 4" diameter sawtooth blade. (1) with a 9" diameter 2 blade open bowtie style blade. Air over oil lift, max height approximately 16". Belt driven by a 2 hp, 3/60/230/460 volt, 1725 rpm xp motor, Class 1 Group D, Class 2 Group F, G. Manual speed adjust handle. Speed details

517150
Used: J H Day "Daymax" mixer, Model 330. Full capacity  330 gallons, working capcity 260 gallons. 60 hp explosion proof motor, directly driven, 230/460 volt, carbon steel construction, jacketed, with baffles and vacuum cover, 42" inside diameter mixing tank, 53" deep mixing tank. details

68498
USED: Daymax mixer, model 200, 304 stainless steel.  200 gallon total capacity, 160 working. 36" diameter x 44" straight side. Dish top and bottom. Internal rated for 125 psi at 353 deg F. Carbon steel jacket rated 125 psi at 353 deg F. (3) 5" wide x 1/4" thick side wall baffles, approximate 10" diameter bottom disc blade, driven by a 40 hp, 230/460, details

68511
USED: Daymax mixer, model 100, 304 stainless steel.  100 gallon total capacity, 80 working. 30" diameter x 30" straight side. Dish top and bottom. Internal rated for vacuum, stainless steel dimple jacket rated 125 psi at 353 deg F. (3) 3-1/2" wide x 1/4" thick side wall baffles. Approximate 10" diameter bottom disc blade, driven by a 25/12.5 hp, 460 volt, details

65581
USED: Daymax mixer, model 150, 304 stainless steel.  200 gallon total capacity, 150 working. 36" diameter x 44" straight side. Dish top and bottom. Carbon steel jacket rated approximately 125 psi at 353 deg F. Approximate 12" diameter bottom disc blade. Driven by a 40 hp, 3/60/230/460 volt, 3543 rpm motor. Openings: top 19" manway with (2) 4" sight glass details

62722
USED: High speed dispersing mixer. Carbon steel/stainless  steel construction on product parts. 4" (100 mm) diameter shaft with 3 propellers and 1 saw blade, driven by a 60 hp/40KW-380 volt/50 cycle/3 ph motor and a 3.3/5.1 hp/2.2/3.4 kW-380 volt/50 cycle/3 ph motor. Tank for hydraulic pressure. Mounted on foot plate with holes for fastening. Overall dimensions details

49588
USED: Day Max Hi-Speed Disperser, Model 200. 304 stainless  steel. 200 gallon total, 160 gallon working. Non-jacketed bowl 35-1/2" diameter x 43" straight side. Wire mesh hinged top lid. Provision for (3) baffles. 3" bottom outlet with flush valve. Carbon steel bottom hi-shear impeller, 50/25 hp (xp) motor. 3600/1800 rpm. #4 finish exterior. details