40739001
Used- Young Industries multi-shaft continuous mixer, model 12INX72IN, 304 stainless steel. 6.84 cubic feet. Non-Jacketed trough 21 3/4" wide x 72" long x approximately 15" deep. (2) 4 1/2" diameter shafts with 1/4'' thick bolt on paddles. Top hinged cover, 10'' top end inlet, 8'' x 16'' end bottom outlet. Driven by a 7.5 hp, 3/60/575 volt, 1760 rpm gearmotor, details
|
40652001
Used- Oakes slurry mixer, model 40'' SM, 304 stainless steel. 200 gallon (1,000 pound) capacity non-jacketed tank, 40" diameter x 37" deep. Bolt on top cover, 1/3 hinged. (8) 1'' thick fixed, removable side wall bars, (8) 1'' thick bar agitator, bottom driven by a 20 hp, 3/60/230/460 volt, 1760 rpm motor thru a reducer, no ratio. Includes a Crepaco discharge details
|
40557014
Used- Patterson Kelley continuous zig-zag blender, model 12", 304 stainless steel. Maximum material density 65 pounds per cubic foot. 12" diameter x approximately 144'' long chamber. 13" top end feed, 7 1/2'' x 14 1/2'' end bottom outlet. Driven by a 1 hp, 3/60/208-230/460 volt, 1730 rpm xp motor with reducer. Mounted on a carbon steel frame.
details
|
40557015
Used- Patterson Kelley continuous zig-zag blender, model 12", 304 stainless steel. Maximum material density 65 pounds per cubic foot. 12" diameter x approximately 144'' long chamber. 13" top end feed, 7 1/2'' x 14 1/2'' end bottom outlet. Driven by a 1 hp, 3/60/208-230/460 volt, 1730 rpm xp motor with reducer. Mounted on a carbon steel frame.
details
|
40530037
Used- Continuous screw/paddle mixer, 316 stainless steel. 9'' diameter x 96'' long x 4 1/2'' centers open screw, 18'' long 1/4'' thick bolt on paddle section, 2 3/4'' diameter shaft. Non-jacketed U-trough 24'' wide x 11' long x 16'' deep. 9'' X 13'' end bottom outlet. No motor. Mounted on stainless steel legs. details
|
40530004
Used- Continuous screw mixer, 316 stainless steel. 9'' diameter x 105'' long x 4 1/2'' centers open screw, 2 3/4'' diameter shaft. Non-jacketed U-trough 23 1/2'' wide x 10' long x 16'' deep. 8'' end bottom outlet. Driven by a 2 hp, 3/60/460 volt, 1735 rpm gearmotor, ratio 36 to 1. Mounted on stainless steel legs with casters. details
|
40311001
Used- Teledyne Readco 7 7/8" twin shaft screw processor, 304 stainless steel. (2) 7 7/8" diameter x approximate 60" long shafts. Carbon steel jacketed clamshell design, barrel rated 150 psi at 450 deg F. Top end feed with hopper, end bottom outlet. Driven by a 60 hp, 3/60/230/460 volt, 1780 rpm XP gearmotor, ratio 11.17:1. Mounted on a 43 1/2'' tall carbon details
|
40311008
Used-Arde Barinco continuous inline mixing system consisting of: (1) Arde Barinco Dispershear mixer, model D6000, 316 stainless steel. Approximately 6 to 75 gallons per minute, 1 to 350 pounds an hour capacity. Includes a top mounted stainless steel feed hopper with feed screw. (1) Solitec Solibin bin discharge station with (4) 40'' x 40'' x 40'' deep carbon details
|
|
|
89577
USED: Teledyne Readco 5" twin screw processor, 316 stainless steel. (2) 5" diameter x approximate 36" long shafts, clamshell design. Carbon steel jacketed chamber rated 150 psi at 300 deg F. 5" x 8" top end feed, end outlet. Driven by a 25 hp, 3/60/220/440 volt, 1755 rpm varispeed, ratio 13:1, min/max rpm 65/282. Base mounted. Built 1977. details
|
523534
USED: List twin screw dryer/extruder/reactor, type AP80. Material of construction is stainless steel on product contact parts. 2 x 5-1/4" diameter x 49.5" straight side (134mm x 1270mm) side by side twin screws. Jacketed. Removable barrel. Complete with motor. Without hydraulic unit. Mounted on a carbon steel frame. On 4 legs. details
|
87896
USED: Marion continuous paddle mixer, model C2472. 4.3 to 15.4 cubic feet working capacity, 304 stainless steel. Dimple jacketed trough 24" wide x 72" long x approximately 27" deep, rated 125 psi at 360 deg F. 3-3/4" diameter shaft with 9 paddles welded to 1-1/2" diameter posts. Top cover with safety grate, 8" end bottom outlet. Driven by a 5 hp, 3/60/230/460 details
|
87897
USED: Marion continuous paddle mixer, model C2472. 4.3 to 15.4 cubic feet working capacity, 304 stainless steel. Dimple jacketed trough 24" wide x 72" long x approximately 27" deep, rated 125 psi at 360 deg F. 3-3/4" diameter shaft with 9 paddles welded to 1-1/2" diameter posts. Top cover with safety grate, 8" end bottom outlet. Driven by a 5 hp, 3/60/230/460 details
|
|
|
522970
USED: 12" Patterson Kelley continuous stainless steel zig zag blender.Size 12, rated for 50 pounds per cubic foot bulk density material.With 1 hp, 1725 rpm, 208-230/460 volt explosion proof motor. Chaindrive. Unit is complete with stainless steel intensifier bar.Intensifier drive is 2 hp, 1725 rpm, 208-230/460 volt. Blender isconstructed of 304 stainless details
|
522973
USED: 16" Patterson Kelley continuous carbon steel zig zag blender,size 16. Rated for 70 pounds per cubic foot bulk density material.Unit is designed for intensifier bar but no bar or bar drive is included. Reliance model P18G1009A 3 hp, 1745 rpm, 230-460 volt, 60 hz, 3 phase, 1.0 S.F., 182T frame, 9.2/4.6 amp explosion proofmotor. Boston reducer model details
|
|
|
|
|
REQUEST PRICE QUOTE
Diameter (in.): 32
Manufacturer: Rietz Manufacturing
Model: RS-18-K5405
HP: 5
522762
USED: Rietz twin shaft ribbon blender, model RS-18-K5405. Allstainless steel construction, 1,000 pound capacity, (2) 18" diameterribbons, single ribbons 2" wide x 7/16" thick, 36.5" wide x 5' longinside, (2) 5 hp 3/60/230/460 VAC gear reduced motor drives withstainless steel cover, belt drive, 4" shaft, 7" stainless steelextension on top of drum, (2) pneumatic details
|
REQUEST PRICE QUOTE
Diameter (in.): 32
Manufacturer: Rietz Manufacturing
Model: RS-18-K5405
HP: 5
522763
USED: Rietz twin shaft ribbon blender, model RS-18-K5405. Allstainless steel construction, 1,000 pound capacity, (2) 18" diameterribbons, single ribbons 2" wide x 7/16" thick, 36.5" wide x 5' longinside, (2) 5 hp 3/60/230/460 VAC gear reduced motor drives withstainless steel cover, belt drive, 4" shaft, 7" stainless steelextension on top of drum, (2) pneumatic details
|
85912
USED: Goodway Industries continuous mixer, model CML25, 304 stainless steel. 10" diameter, jacketed stator, 2" triclamp inlet, 2" National Pipe Thread outlet. Driven by a 7-1/2 hp, 3/60/208-230/460 volt, 1725 rpm thru gearbox motor. Includes an APV pump, 1-1/2 hp motor, 3/60/208-230/460 volt, 1725 rpm gearmotor. Mounted on casters. details
|
85691
USED: Hansa Eco-Mix continuous dynamic foam generator, model Ecomix, 304 stainless steel. Approx 8-1/2" diameter x 11-3/8" deep horizontal chamber with mixing pins. 2" NPT inlet, 1" NPT outlet. Driven by a 2.2 kw, 3/50/380/460 volt, 2850 rpm gearmotor. Built 1995. Unit includes a cavity pump and (3) 12 gallon holding tanks. details
|
|
|
84996
USED: Paddle style continuous mixer, 431 stainless steel. 8" diameter x 50" long non-jacketed chamber, 2" diameter shaft with 1-1/2" wide x 1/4" thick screw in paddles. 4" x 4" top feed, 4" x 4" end bottom outlet. Driven by a 10 hp, 3/60/230/460 volt, 1755 rpm motor. Mounted on carbon steel legs. details
|
85010
USED: Brown International Corp twin shaft paddle style continuous mixer, model 1000, 304 stainless steel. (2) Section non-jacketed trough. Top section 13" wide x 71-1/2" long x approx 14" deep, bottom section 13" wide x 71-1/2" long x approx 23" deep. Each with 2-1/4" diameter shafts with welded-on paddles. 8" x 10" top feed, 5" x 5" end bottom outlet. details
|
85018
USED: Brown International Corp twin shaft paddle style continuous mixer, model 1000, 304 stainless steel. (2) Section non-jacketed trough. Top section 13" wide x 71-1/2" long x approx 14" deep. Bottom section 13" wide x 71-1/2" long x approx 23" deep. Each with 2-1/4" diameter shafts with screw in paddles. 3", 4" NPT top feed, 4" end bottom outlet. Driven details
|
|
|
83280
USED: Reitz dual shaft continuous screw blender, model RS-33-K5310. Approx 800 pound capacity (150 cu ft), 304 stainless steel. (2) 32" diameter x 10" pitch screws rated 14.9 psi at 250 deg F. Each driven by a 30 hp, 3/50/230/460 volt, 1170 rpm motor thru a reducer, ratio 25.6:1. Non-jacketed trough 66" wide x 120" long x approx 38" deep. (2) 12" x 9" end details
|
83156
USED: Lipp in line continuous rotor/stator shear force mixer, model R026-L, 316 stainless steel. Horizontal design. Approxiimate 12" diameter x 20" long stainless steel jacketed chamber. Internal rated 5 BAR (72psi) at 98 degrees C (208F), jacket rated 3 BAR (43psi) at 98 degrees C. (208F). 4" top inlet, 6" end outlet. Driven by a 75 hp, 3/60/460 volt, details
|
519433
USED: Oakes model 8MB5 continuous mixer/foamer. 303 stainless steelfood grade mixer. 110 psi back pressure on head. Unit has a bakingrotor which is designed for cake btter, icing, etc. Main drive 5 hp3/60/230/460 XP. Range 100 to 350 rpm. All electricals are explosionproof. Heavy duty jacketed stators, 3/4 hp 3/60/230/440 varidrive forfeed pump. Range details
|
77177
USED: Oakes continuous slurry mixer, model 60SMVJ40H, stainless steel.440 gallon jacketed tank, 60" diameter x 36" deep. 1/2 hinged topcover. 8 fixed side wall bars, 8 bar agitator bottom driven by a40 hp hydraulic motor. Waukesha rectangular flange discharge pump.Unit includes a tote lifter, approx 7' high, and control panel.Mounted on a stainless steel details
|
73651
USED: Schugi mixer, type Flexomix 250. Carbon steel construction,rubber lined on product contact parts. (1) 5.9" dia (150mm dia)product inlet, (1) 9.8" dia (250mm) product outlet. Belt driven byan 11.25 hp/7.5 kw/380 volt/50 cycle/3 ph XP motor. Overalldimensions: 4'6" x 3'3" x 4'2" high (1400mm x 1000mm x 1300mm high). details
|
71680
USED: Schugi model 400 Flex-O-Mix, stainless steel and rubberconstruction. 25" diameter x 35" straight side mixing chamber.Includes spray nozzles. Driven by a 55 kw (75 hp) 3/50/380/420 volt,1480 rpm motor. Capacity 60,000 lb/hr. Top feed openings, approx 25"bottom outlet. 2 inspection doors. Unit includes a spare 30 kw motor,control panel and spare details
|
|
|
66315
USED: Teledyne Readco continuous ribbon mixer, 304 stainless steel, 14"dia x 12'L. Bolt on outer ribbon 3/8" thick x 1" wide. Welded on inner ribbon 1/4" thick x 1" wide, 3 1/4" dia shaft, removable trough liner, driven by vari speed 5.4 HP 230/460 1720 RPM drive thru euro drive. Ratio 21.7 to 1. Input RPM 885/3534, output RPM 39/162. Flat bolt on details
|
64274
USED: Teledyne Readco continuous compounder processor. Size 6" diameter x 44" long barrel, stainless steel contact parts, carbonsteel jacket rated 150 psig, internal 50 psi, 8 sq ft heat transferarea, steam heated, 10" dia feed opening, 4" dia discharge, approx42" disch height, pusher type packing glands, driven by 75 hp motor 230/460 volt/1750 rpm, thru details
|
|
|
|
|
|
|
|
|