More Info
HP: 400
Manufacturer: Farrell Banbury
Model: F80
10755052
Used-Farrell/Banbury Model F80 Intensive Mixer. Mixing chamber has an 80 liter net volume capacity and is rated for approximately 132 lb (60 kg) batch. Chamber has four wing rotor, FYH, dust stops, roller bearings and floating weight ram with 16" cylinders and 12" neck extension. Driven by a 400 hp DC motor with SCR through a Lufkin gear reducer. Includes details
|
More Info
HP: 600
Manufacturer: FARREL POMINI BANBURY
Model: F80
90313
USED- Farrel Pomini Banbury Mixer, Model F80. Jacketed chamber, drop door design. 4 wing style cored rotors, approximately 35-70 rpm. Mixing chamber 21.2 gallon (80 liter), max batch weight 132 pounds. Ram feed. Driven by a 600 hp DC motor with SCR controller. Includes a hydraulic system and lube system. details
|
More Info
HP: 600
Manufacturer: Farrell
Model: F80
89225
USED: Farrel Banbury mixer, model F80. Jacketed chamber, drop door design. 4 wing style cored rotors, approximately 35-70 rpm. Mixing chamber 80 liter, max batch weight 132 pounds. Ram feed. Driven by a 600 hp DC motor with SCR controller. Includes a hydraulic system, lube system, temp control panel and a Farrel Series 2000 operator panel. Built 1999. details
|
More Info
HP: 400
Manufacturer: Farrell
Model: F80
89079
USED: Farrel Banbury mixer, model F80. Approximate 80 liter, 21 gallon, 116 pound working capacity. Chrome plated chamber, carbon steel jacketed, drop door design. Wing style cored rotors, approximately 30-105 rpm. 10-1/2" x 24" feed opening with ram feeder. Driven by a 400 hp, 500 volt, 1150/2300 rpm DC motor thru a Farrel gearbox, drive ratio 11.652:1. details
|
More Info
HP: 30/15
Manufacturer: Farrell
Model: 00C
85929
USED: Farrel Banbury Mixer, model 00C. Jacketed chamber, drop door design, rated 150 psi water or steam. Wing style cored rotors, approximately 125/62.5 rpm. Gross chamber liquid capacity 1.2 gallons. Max batch weight 7 pounds. Ram feed. Driven by a 30/15 hp, 3/60/440 volt, 1750/860 rpm motor. Includes a control panel with an ABB model ACS501 drive panel. details
|
More Info
HP: 112
Manufacturer: Farrell
Model: OOC
82962
USED: Farrel Banbury Mixer, model OOC. Carbon steel jacketed chamber, stainless steel swing side design. Chrome plated cored rotors. Gross chamber liquid capacity 1.2 gallons, max batch weight 7 pounds. Ram feed. Driven by an 84 kw (112 hp), 3/60/460 volt, 1700 rpm DC motor. Includes a control panel. Built 1986. details
|
More Info
HP: 7.5
Manufacturer: Moriyama
Model: D3-7.5
77157
USED: Moriyama dispersion mixer, batch mixer/compounder, type D3-7.5. 3 liter mixing capacity, 8 total. Jacketed bowl 6-5/16" left to right x 9-1/4" front to back x approximately 12" deep. Cored blades. Rotor speeds front approximately 25 to 100 rpm, rear approximately 16.7 to 66.7 rpm. Single ram air cylinder feed, manual crank tilt bowl. Driven by a 5.5 details
|
|
|
|
|
More Info
HP: 30
Manufacturer: STEWART BOLLING
Model: 00
69846
Used- Stewart Bolling Spiral Flow Banbury Style Mixer, Model "00", Carbon Steel. Approximately 9" wide x 9" long x 9" deep jacketed mixing chamber. Chrome plated cored blades, single ram cylinder feed, geared both ends. 2 hp hydraulic tilt. Driven by a 30/15 hp, 460 volt, 1775/885 rpm motor thru a reducer, ratio 14:1. Unitized on a common frame with controls. details
|
More Info
HP: 87
Manufacturer: Farrell
Model: 00C
68412
USED: Farrell Banbury mixer, model 00C. Stainless steel jacketed swing side (drop door design). Max steam or water psi 150, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" diameter ram cylinder, max pressure 100 psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated details
|
|
|
More Info
HP: 25
Manufacturer: Farrel-Birmingham
Model: B
28647
Used- Farrel-Birmingham Banbury Mixer, Model B, Carbon Steel. 2.6 pound capacity, side open design. Air operated feed ram with flat style floating weight. Two wing rotor. 4 speed drive. Driven by a 25/17/12/8.35 hp, 3/60/220 volt, 1750/1160/ 870/575 rpm, output 230/155/116-77 rpm. Includes a knee safety and a Master Unibrake. details
|
More Info
HP: 10
Manufacturer: Farrel-Birmingham
Model: 00
20968
Used- Banbury Mixer, Model 00, Carbon Steel. Chrome plated steel rotor, body and ends. Capacity 5 pounds at 1.25 SP gravity, cored rotors and bowl. Flat style floating weight. Side open swing doors (2 wing rotors) direct driven by 10 hp, 3/60/220/440 volt, 1800 rpm US Synchrogear motor, 16.9:1 ratio, output 100 rpm. details
|