89592
USED: Paul O Abbe pebble mill, model 4B, carbon steel. Jacketed chamber 48" diameter x 60" long. 11" x 14" charge/discharge port with cover. Driven by a 20 hp, 3/60/230/460 volt motor with a shaft mounted reducer. Approximate 24 rpm drum speed. Includes a dry discharge housing. Unit mounts on 64" tall leg extensions. details
|
89593
USED: Paul O Abbe pebble mill, model 4B, carbon steel. Jacketed chamber 48" diameter x 60" long. 11" x 14" charge/discharge port with cover. Driven by a 20 hp, 3/60/230/460 volt motor with a shaft mounted reducer. Approximate 24 rpm drum speed. Includes a dry discharge housing. Unit mounts on 64" tall leg extensions. details
|
89594
Used- Paul O Abbe pebble mill, model 4B, carbon steel. Jacketed chamber 48" diameter x 60" long. 11" x 14" charge/discharge port with cover. Driven by a 20 hp, 3/60/230/460 volt motor with a shaft mounted reducer. Approximate 24 rpm drum speed. Includes a dry discharge housing. Unit mounts on 64" tall leg extensions. details
|
88597
USED: Paul O Abbe pebble mill, model #1, 304 stainless steel product contact. 68" diameter x 56" straight side. 117 cubic feet total capacity, 29.25 working. Alumina ceramic lined. Internal rated 14.7 psi/FV at 80 deg F. Carbon steel jacket rated 14.7 psi at 80 deg F. 304 stainless steel skin, with dual drum lifting mechanism, side by side 18" diameter details
|
|
|
522060
USED: Netzsch alumina lined pebble mill, 5' diameter x 4' long, dish ends. Actual inside diameter is 4'9". Acutal straight side wall is 48", plus the dished ends. Equippped with heavy duty outboard roller bearings. Built 1984. Has seen very little use. Fig. number 398/56, inhalt 3060. Rated 4 bar. Drive motor with gearbox which is directly coupled to details
|
83754
USED: Paul O Abbe pebble mill, carbon steel. Non-jacketed, high density porcelain lined chamber 6' diameter x 6' long. 16" x 12" opening with cover, built in discharge arrangement with a grate and a 2-1/2" NPT outlet. Driven by a 30 hp, 3/60/208-230/460 volt, 1765 rpm motor with brake thru a reducer, ratio 17:1. Approx 16 rpm cylinder speed. Includes control details
|
82466
USED: Paul O Abbe pebble mill, model 2B-HD. Carbon steel ceramic lined non-jacketed chamber. 60" diameter x 72" long (726 total gallon capacity). 13" x 14" charge port with cover. Unit gear driven by a 20 hp, 3/60/230/460 volt gear motor with brake, approx 20 rpm final output. Unit mounts on 52" high stands. details
|
80672
USED: Paul O Abbe pebble mill, model PM-5A. 304 stainless steel,ceramic lined non-jacketed chamber 37" diameter x 48" long, 166 totalgallon capacity. 8" x 10" charge port with cover. Includes dust hoodwith bottom discharge. Unit driven by a 10 hp, 3/60/220/440 volt,1760 rpm gear motor with brake, approx 30 rpm final output. Unitmounts on 36" high stands. Includes details
|
|
|
69333
USED:Paul Abbe pebble mill, model 5AS. 316 stainless steel (productcontact), 36" diameter x 60" straight side, 30 cu ft total capacity,7.5 working, alumina ceramic lined, rated 14.7 psi/fv at 26.7 deg C(80 deg F), jacket rated 14.7 psi at 26.7 deg C (80 deg F), stainlesssteel skin and dual drum lifting mechanism, side-by-side 18" diametercharge ports details
|
63121
USED: Patterson type ball mill, carbon steel, 2' diameter x 3' long. 8 cu ft total capacity. 12-1/2" x 8-1/4" charging port (missing door), polyurethane lining, (2) skf pillow block bearings, 1 side removable cap. Mounted on fabricated stand. 28" discharge height with 7-3/4" bottom discharge. Missing drive, ball charge. Overall dimensions approx 7' high x details
|