Ball Mill Mills

E-mail this page Printable Version Sell your Machinery

30 Ball Mill Mills In Stock

  »Click on links to view detailed information and additional photos
 
REQUEST PRICE QUOTE
Diameter (in.):
Length (in.):
Manufacturer:
HP:
Stock #: 41618008

41618008
Used-Abbe Flint Lined Ball Mill  details

REQUEST PRICE QUOTE
Diameter (in.): 70.8
Length (in.): 157.4
Manufacturer: Sala
HP: 214.5
Stock #: 40685002

40685002
Used-Sala Ball Mill, Type SRR. 1800 mm diameter x 4000  mm long, overflow discharge, 23.4 r/min operating speed. Drive consists of rubberized rollers, speed reducer, sliding clutch, V-rope drive with guard, asynchronous motor type ABB HXR 315 MB, squirrel cage, 160 kW, 1485 r/min, 380V, 50 hz, IP 54. Manufactured 1993. details

REQUEST PRICE QUOTE
Diameter (in.): 18
Length (in.): 24
Manufacturer: PAUL O ABBE
HP: 2
Stock #: 40923002

40923002
Used- Paul O Abbe Ball Mill, Carbon Steel. Non-Jacketed  ceramic lined horizontal chamber 18" diameter x 24" long. 7 1/2" x 9 1/4" charge/discharge port with cover. Driven by an approximate 2 hp gearmotor. Mounted on carbon steel legs with frame. details

REQUEST PRICE QUOTE
Diameter (in.): 42
Length (in.): 48
Manufacturer: Paul O Abbe
HP: 10
Stock #: 40840001

40840001
Used-Paul O Abbe BM-5B ball mill, jacketed. 10 hp motor  with belt drive and shaft mount reducer. Jacket rated for 15 psig at 250 deg F. Cylinder 42" diameter x 48" long, 30 cubic feet total capacity. 13 1/4 x 14 3/4 loading port with 6 1/2" diameter built-in wet discharge with 1/4" slots for media retention on opposite side of cylinder. Approximately 24" details

REQUEST PRICE QUOTE
Diameter (in.): 6'
Length (in.): 8'
Manufacturer: General Machine
HP:
Stock #: 40708002

40708002
Used-General Machine Ball Mill, carbon steel, 6' diameter,  8' Long, 226 cubic feet. 1702 gallons capacity with 2" lifter bars. Not water jacketed. Mill is mounted on steel legs and pillow block bearings. Includes 12" x 16" grinding door plus the same size grated door for discharge. Mill is enclosed in a steel discharge jacket. Mill is driven by 60 hp Reliance details

REQUEST PRICE QUOTE
Diameter (in.): 5'
Length (in.): 4'
Manufacturer: Patterson
HP:
Stock #: 40708003

40708003
Used-Patterson Steel Ball Mill 5' diameter, 4' long,  78 cubic feet. 587 gallon capacity with lifter bars. Serial No. P7416. Not water jacketed. Mill is mounted on steel legs and pillow block bearings. Includes two 9 x 15 " grinding doors plus two same size discharge doors for unloading mill. The two discharge openings are 180 degrees apart so that details

REQUEST PRICE QUOTE
Diameter (in.): 6'
Length (in.): 5'
Manufacturer: Patterson
HP:
Stock #: 40708004

40708004
Used-Patterson Steel Ball Mill, 6' diameter, 5' long,  141 cubic feet. 1062 gallons capacity with 1 " lifter bars. Not water jacketed. Mill is mounted on steel legs and pillow block bearings. Includes 12" x 16" grinding door plus the same size grated discharge door. Mill is enclosed in a steel discharge jacket. Mill is driven by a 75 hp Reliance Electric details

REQUEST PRICE QUOTE
Diameter (in.): 48
Length (in.): 66
Manufacturer: PATTERSON FOUNDRY
HP: 15
Stock #: 40708005

40708005
Used- Patterson Foundry Ball Mill, carbon steel. Approximately  48'' diameter x 66'' long non-lined jacketed chamber. Approximate 63 cubic feet, 474 gallons capacity. Internal lifter bars. 9 1/2" x 15 1/2" charge/discharge opening (no covers). Driven by a 15 hp, 3/60/208-220/440 volt, 1765 rpm gearmotor. Mounts on 55'' tall stands. details

REQUEST PRICE QUOTE
Diameter (in.): 6'
Length (in.): 5'
Manufacturer: Patterson
HP:
Stock #: 40708006

40708006
Used-Patterson Steel Ball Mill, 6' diameter, 5' long,  141 cubic feet. 1062 gallons capacity with 1” lifter bars. The mill is water jacketed and mounted on steel legs and pillow block bearings. Includes 12" by 16" grinding door plus the same size grated discharge door. Mill is used for wet grinding and has a discharge jacket and trough for discharging details

REQUEST PRICE QUOTE
Diameter (in.): 40
Length (in.): 48
Manufacturer: PATTERSON FOUNDRY
HP: 15
Stock #: 40708007

40708007
Used- Patterson Foundry Ball Mill, carbon steel. Approximately  40'' diameter x 48'' long non-lined jacketed chamber, rated internal 15 psi, jacket 25 psi. Approximate 28 cubic feet, 210 gallons capacity. Internal lifter bars. 8 1/2" x 12 1/2" charge/discharge opening (no covers). Includes a discharge hood. Driven by a 15 hp, 3/60/220/440 volt, 1730 rpm gearmotor. details

REQUEST PRICE QUOTE
Diameter (in.): 3'8"
Length (in.): 4'
Manufacturer: Paul O Abbe
HP:
Stock #: 40708008

40708008
Used-Paul O Abbe Model 4A-BM Steel Ball Mill, 3' 8"  diameter x 4' long, 44 cubic feet. 330 gallon capacity with removable lifter bars. Mill is water jacketed with steel legs and pillow block bearings. Includes 8" by 10" grinding door plus the same size grated door for discharge. Mill is enclosed in a steel discharge jacket. Mill is driven by a 20 details

REQUEST PRICE QUOTE
Diameter (in.): 30
Length (in.): 30
Manufacturer: ABBE ENGINEERING
HP: 5
Stock #: 40708009

40708009
Used- Abbe Engineering Company Ball Mill, carbon steel.  Approximately 30'' diameter x 30'' long non-lined, non-jacketed chamber. Approximate 14.7 cubic feet, 110 gallon capacity. Internal lifter bars. 8" x 9 1/2" charge/discharge port with covers. Driven by a 5 hp, 3/60/208-220/440 volt, 1750 rpm motor thru a reducer, ratio 7.656 to 1, with a Sterns brake. details

REQUEST PRICE QUOTE
Diameter (in.): 56
Length (in.): 45
Manufacturer: Patterson
HP: 1
Stock #: 40708010

40708010
Used- Patterson Foundries Ceramic Lined Ball Mill,  carbon steel jacketed, no rating. Approximately 56'' diameter by 45'' long, 64 cubic feet, 480 gallons. 9 1/2'' x 15 1/2'' charge/discharge, no cover. Mill missing legs, doors and drive. details

REQUEST PRICE QUOTE
Diameter (in.): 48
Length (in.): 72
Manufacturer: Paul O Abbe
HP: 20
Stock #: 524056

524056
USED: Paul O Abbe 4' x 6' ceramic lined with 3000 lb  flint rock. Motor is 20 hp, 3 phase, 240 volt, 800 rpm. Babbit bearings, 16 x 20 door, 2.5 stainless steel discharge valve. Year N/A. Walls are 6"thick. Mill has work platform and is reported in good shape. details

REQUEST PRICE QUOTE
Diameter (in.): 72
Length (in.): 60
Manufacturer: Paul O Abbe
HP: 40
Stock #: 87573

87573
USED: Paul O Abbe ball mill, model BM-1. Carbon steel  jacketed chamber, non-lined. 72" diameter x 60" long, 1057 total gallon capacity. 12" x 14" charge port, no cover, 3" liquid discharge. Unit gear driven by a 40 hp, 3/60/460 volt, 1800 rpm motor thru a reducer, approximate 15 rpm final output. Unit mounts on approximately 72" high stands. Built 1983. details

REQUEST PRICE QUOTE
Diameter (in.): 72
Length (in.): 60
Manufacturer: Paul O Abbe
HP: 40
Stock #: 87574

87574
USED: Paul O Abbe ball mill, model BM-1. Carbon steel  jacketed chamber, non-lined. 72" diameter x 60" long, 1057 total gallon capacity. 12" x 14" charge port, no cover, 3" liquid discharge. Unit gear driven by a 40 hp, 3/60/460 volt, 1800 rpm motor thru a reducer, approximately 15 rpm final output. Unit mounts on approximately 72" high stands. Built 1983. details

REQUEST PRICE QUOTE
Diameter (in.): 32
Length (in.): 44
Manufacturer: Paul O Abbe
HP: 3
Stock #: 84850

84850
USED: Paul O Abbe ball mill, carbon steel, lined non-jacketed  chamber 32" diameter x 44" long, 153 total gallon capacity. 13" x 14" charge port with cover, 2" bottom discharge. Driven by a 3 hp, 3/60/220/440 volt, 1150 rpm motor. Mounted on legs. details

REQUEST PRICE QUOTE
Diameter (in.): 44
Length (in.): 54
Manufacturer:
HP:
Stock #: 84851

84851
USED: Ball mill, carbon steel, lined non-jacketed chamber  44" diameter x 54" long, 355 total gallon capacity. 9" x 15" charge port with 2 covers. Requires a motor. Mounted on legs. details

REQUEST PRICE QUOTE
Diameter (in.): 72
Length (in.): 72
Manufacturer: Paul O Abbe
HP: 25
Stock #: 84852

84852
USED: Paul O Abbe ball mill, carbon steel, lined non-jacketed  chamber 72" diameter x 72" long, 1269 total gallon capacity. 13" x 14" charge port with cover, 3" bottom discharge. Driven by a 25 hp motor. Mounted on legs with base. details

REQUEST PRICE QUOTE
Diameter (in.): 50
Length (in.): 64
Manufacturer:
HP: 15
Stock #: 84853

84853
USED: Ball mill, carbon steel, lined non-jacketed chamber  60" diameter x 64" long, 782 total gallon capacity. 13" x 15" charge port with 2 covers. Driven by a 15 hp, 3/60/230/460 volt, 1750 rpm motor with Dodge torque arm reducer, ratio 15.33:1. Mounted on an I-beam frame. details

REQUEST PRICE QUOTE
Diameter (in.): 72
Length (in.): 72
Manufacturer: Paul O Abbe
HP:
Stock #: 82797

82797
USED: Paul O Abbe ball mill, carbon steel non-lined  chamber, 72" diameter x 72" long. 170 cubic feet, 1269 total gallon capacity. 16" charge port with cover, 8" outlet. Gear driven, requires drive motor, bearings and stands. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 48
Manufacturer: Paul O Abbe
HP:
Stock #: 82798

82798
USED: Paul O Abbe ball mill, carbon steel non-lined  chamber. 60" diameter x 48" long. 78 cubic feet, 587 total gallon capacity. 16" charge port with cover, 8" outlet. Gear driven, requires drive motor, bearings and stands. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 48
Manufacturer: Paul O Abbe
HP: 20
Stock #: 66848

66848
USED: Abbe ball mill, carbon steel, jacketed, 5' diameter  x 4' long. 78 cubic foot (587 gallon) capacity. Jacket rated 14 psi. 16" x 16" door, 8" diameter outlet. 2 pillowblock bearings, geared one end. Unit requires approximate 20 hp drive and stand. details

REQUEST PRICE QUOTE
Diameter (in.): 64
Length (in.): 48
Manufacturer: Epworth
HP: 125
Stock #: 66849

66849
USED: Epworth ball mill, type 5-86, carbon steel, jacketed.  64" diameter x 48" long. 89 cubic foot (668 gallon) capacity. 17" diameter inlet, 8" outlet. Geared one end. Unit requires drive, stand and bearings. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 48
Manufacturer: Paul O Abbe
HP: 25
Stock #: 66850

66850
USED: Ball mill, carbon steel, jacketed. 60" diameter  x 48" long. 78 cubic foot (587 gallon) capacity. 12" diameter inlet, 8" outlet. Geared one end. Unit requires drive, stand and bearings. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 42
Manufacturer: Paul O Abbe
HP: 25
Stock #: 66851

66851
USED: Ball mill, carbon steel, jacketed, 60" diameter  x 42" long. 68 cubic foot (513 gallon) capacity. 16" diameter inlet (no cover), 4" outlet. Unit requires drive, stand, bearings and gears. details

REQUEST PRICE QUOTE
Diameter (in.): 44
Length (in.): 48
Manufacturer: Devine
HP: 15
Stock #: 66853

66853
USED: Devine Process ball mill, carbon steel, jacketed.  44" diameter x 48" long. 44 cubic foot (330 gallon) capacity. 16" diameter inlet, 8" outlet, geared one end. Unit requires drive, stand and bearings. details

REQUEST PRICE QUOTE
Diameter (in.): 72
Length (in.): 72
Manufacturer: Paul O Abbe
HP: 40
Stock #: 66854

66854
USED: Abbe ball mill, carbon steel, jacketed, 6' diameter  x 6' long. 170 cubic foot (1269 gallon) capacity. 16" diameter inlet (no cover), 8" outlet, geared one end. Unit requires approximate 40 hp drive, stand and bearings. details

REQUEST PRICE QUOTE
Diameter (in.): 72
Length (in.): 72
Manufacturer: Paul O Abbe
HP: 40
Stock #: 66856

66856
USED: Abbe ball mill, carbon steel, jacketed, 6' diameter  x 6' long. 170 cubic foot (1269 gallon) capacity. 16" diameter inlet (no cover), 8" outlet, geared one end. Unit requires approximate 40 hp drive, standand bearings. details

Servicing all Major Industries Including: Chemical | Food & Beverage | Pharmaceutical | Plastics | Packaging | Cosmetic | Paint & Coatings | Waste Water