More Info
Diameter (in.): 6
Length (in.): 72
Material:
Manufacturer: APV
10992022
Used-(3) 6" x 72" APV Scrape Surface Heat Exchangers, model 3HRT 672 (1 ammonia, 1 chilled water, 1 steam). 150 psi units with National Board stamps. Ammonia unit is chrome plated with 4 rows with 14 stainless steel blades. Steam and chilled water units are stainless steel with 4 rows with 28 fiber blades. There are 4 rows of blades held on by pins. All details
|
More Info
Diameter (in.): 6
Length (in.): 48
Material: 304SS
Manufacturer:
42056002
Used- Chemetron Votator Scraped Surface Heat Exchanger, 6 Square Feet, 304 Stainless Steel. (1) Approximately 6'' diameter x 48'' long horizontal chamber, plastic type scrapers, jacketed. 1-3/4'' inlet and outlet. Driven by a 5 hp, 3/60/230/460 volt, 1730 rpm Reliance variable speed motor, ratio 20.9 to 1, minumu/maximum rpm 20/200. Mounted on a stainless details
|
|
|
More Info
Diameter (in.): 6
Length (in.): 48
Material: 304SS
Manufacturer: CHEMETRON VOTATOR
41969001
Used- Chemetron Votator Scraped Surface Heat Exchanger, 12 Total Square Feet, 304 Stainless Steel. (2) Approximately 6'' diameter x 48'' long horizontal chambers, plastic type scrapers, carbon steel jacket. 2'' tri-clamp inlet and outlet. Each tube driven by a 7.5 hp, 3/60/230/460 volt, 1710 rpm US variable speed motors. Includes 2 Yokogawa temperature controllers. details
|
|
|
|
|
|
|
More Info
Diameter (in.): 1
Length (in.): 1
Material: 316SS
Manufacturer: Alfa Laval
40524001
Used- Alfa Laval Contherm Scraped Surface Heat Exchanger. Single process tower integrated system consisting of: (2) Alfa Laval Contherm scraped surface heat exchangers, model 6 x 6, approximately 6 square feet heating surface. Internal rated 450 psi at 315 deg F, jacket rated 225 psi at 315 deg F. Both used for heating. (2) Alfa Laval Contherm scraped surface details
|
More Info
Diameter (in.): 3
Length (in.): 12
Material:
Manufacturer: Cherry Burrell
13825009
Used-Votator margarine pilot plant scraped wall heat exchanger, stand alone, manufactured by Cherry Burrell, model 1C312-A heat exchanger. Size 3 x 12. Has 3 sets of metal blades, cylinder looks good, not scored. Comes complete with ammonia surge tank and piping, including solenoid and expansion valve. Electric specs: 3/60/460 volt, 7.5 hp motor. details
|
More Info
Diameter (in.): 6
Length (in.): 72
Material: SS
Manufacturer: Chemetron
40037519
Used- Chemetron Scraped Surface Heat Exchanger, approximately 9 square feet, stainless steel. 6'' diameter x 72'' long horizontal chamber, internal rated 400 psi at 375 deg F, jacket rated 150 psi at 375 deg F. 1 1/2'' tri clamp inlet, 6'' outlet. Driven by a 15 hp, 3/60/220/440 volt, 1770 rpm cone drive, ratio 7.5 to 1. Mounted on a frame. Serial #A1417, National details
|
More Info
Diameter (in.): 6
Length (in.): 72
Material: 316SS
Manufacturer: ALFA LAVAL
40211001
Used: Alfa Laval Scraped Surface Heat Exchanger, approximately 9 square feet, model 6 X 9, 316 stainless steel. 6'' diameter x 72'' long horizontal chamber, internal rated 300 psi at 300 deg F, jacket rated 250 psi at 300 deg F. 3 7/8'' threaded inlet/outlet. Includes a 10 hp, 3/60/230/460 volt, 1740 rpm gearmotor, ratio 5.99 to 1, 290 output rpm. Unit missing details
|
More Info
Diameter (in.): 6
Length (in.): 24
Material: 316 Stainless Steel
Manufacturer: Cherry Burrell
40069005
Used: Cherry Burrell Votator Scraped Surface Heat Exchanger, Model 6 x 24, 316 stainless steel. (1) 6" diameter x 24" long jacketed horizontal chamber with (8) blades. Jacket rated 150 psi @ 375 degrees F, shell rated 400 psi @ 375 degrees F. Driven by a 7 1/2 hp, 3/60/230/460 volt, 1760 rpm XP gear motor. Includes a Waukesha Cherry Burrell positive details
|
More Info
Diameter (in.): 3
Length (in.): 12
Material:
Manufacturer: Chemetron
89574
USED: Chemetron Votator scraped surface heat exchanger, .7 square feet, model 1C312L, 316 stainless steel. (1) 3" diameter x 12" long jacketed horizontal chamber with (2) blades. Inlet/outlet. Driven by a 3 hp, 3/60/230/460 volt, 1730 rpm varispeed motor, min/max 88.8/888 rpm. Mounted on a frame with casters. details
|
More Info
Diameter (in.): 3
Length (in.): 12
Material: 316 stainless steel
Manufacturer: Cherry Burrell
89576
USED: Cherry Burrell Votator scraped surface heat exchanger. .7 square feet, model 3SSHE, 316 stainless steel. (1) 3" diameter x 12" long jacketed horizontal chamber with (2) blades. Inlet/outlet. Driven by a 3 hp, 3/60/230/460 volt, 1730 rpm varispeed motor, min/max 45/450 rpm. Base mounted. details
|
More Info
Diameter (in.): 6
Length (in.): 32
Material: 304 stainless steel
Manufacturer:
86130
USED: Twin tube scrape surface heat exchanger, 304 stainless steel. Approximate 6 square feet heat transfer surface, (2) 6" diameter x 24" long jacketed tubes. Plastic scraper blades. 3" tri clamp inlet/outlet. Each tube driven by an approximate 5 hp gearmotor. Includes control panel. Mounted on a carbon steel frame. details
|
More Info
Diameter (in.): 6
Length (in.): 48
Material: 316 stainless steel
Manufacturer: Alfa Laval
85000
USED: Alfa Laval Contherm Dual Chamber Votator scraped surface heat exchanger, 12 square feet, model 6X6, 316 stainless steel. (2) 6" diameter x 48" long jacketed horizontal chambers rated internal 300 psi at 300 deg F, jacket 250 psi at 300 deg F. 2-1/2" tri clamp inlet/outlet. Each shaft driven by a 7.5 hp, 3/60/208-230/460 volt, 1760 rpm motor. Mounted details
|
More Info
Diameter (in.): 8
Length (in.): 60
Material:
Manufacturer: Crepaco
520840
USED: Crepaco votator, scrape surface heat exchanger. 21 square foot surface area, each chamber is 10.5 square feet. Rated for 150 psi @ 200 deg F. Crepaco #D-2021KM2603, built 1983. (2) 8" diameter x 60" long shells. Each tube driven by a 30 hp, 1170 rpm motor, 230/460 volt. Multiple V-belt and pulley. Set up for ammonia cooling. Last run in a grape juice details
|
More Info
Diameter (in.): 10.5
Length (in.): 10.5
Material:
Manufacturer: Crepaco
523433
USED: Crepaco votator scrape surface heat exchanger. 21 square foot surface area, each chamber is 10.5 square feet. Rated for 150 psi @ 200 deg F. Crepaco #D-2021KM2603, built 1983. (2) 8" diameter x 60" long shells. Each tube driven by a 30 hp, 1170 rpm motor, 230/460 volt. Multiple V-belt and pulley. Set up for ammonia cooling. Last run in a grape juice details
|
More Info
Diameter (in.): 6
Length (in.): 72
Material: Stainless Steel
Manufacturer: Crepaco
43659
USED: APV Crepaco model 2HD672 scraped surface heat exchanger. Two (2) barrels 6" diameter x 72" long. 9 square feet, 18 square feet total, nickel/chrome plated tubes rated 300 psi, jacket rated 150 psi, 410 stainless steel scrapers, 350 rpm, rotary seals, 2-1/2" tri-clamp inlet and outlet, single drive, 10 hp, 230/460V/1750 rpm, sanitary. All enclosed details
|
More Info
Diameter (in.): 6
Length (in.): 72
Material: Stainless Steel
Manufacturer: Crepaco
43660
USED: APV Crepaco model 2HD672 scraped surface heat exchanger. Two (2) barrels 6" diameter x 72" long, 9 square feet, 18 square feet total, nickel/chrome plated tubes rated 300 psi, jacket rated 150 psi, 410 stainless steel scrapers, 350 rpm, rotary seals, 2-1/2" tri-clamp inlet and outlet, single drive, 10 hp, 230/460V/1750 rpm, sanitary. All enclosed details
|