Filter Press Filters

E-mail this page Printable Version Sell your Machinery

84 Filter Press Filters In Stock

  »Click on links to view detailed information and additional photos
 
REQUEST PRICE QUOTE
Cubic Feet: 37.13
Square Feet: 445.63
Material: Polyprop
Manufacturer: SPERRY
Stock #: 40588001

40588001
Used- Sperry Filter Press. Type CRN, Size 48. (32)  49" x 50" Polypropylene plates, approximate 1" cake. Approximate 445.63 square feet filter area, 37.13 cubic feet capacity. 100 PSI max filtration pressure. Center feed, four corner discharge, single ram, air over oil. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Cubic Feet: 10.44
Square Feet: 125.22
Material: Polyprop
Manufacturer: JWI
Stock #: 40464001

40464001
Used- JWI Filter Press, Model 800G32-23-11/5DA. (24)  31 1/2" x 31 1/2" (800 mm x 800 mm) polypropylene plates, approximate 1" cake. Approximate 125.22 square feet filter area, 10.44 cubic feet capacity. 100 psi max filtration pressure, 3300 psi hydraulic closing pressure. Center feed, four corner discharge, single ram, air over oil. Mounted on a carbon details

REQUEST PRICE QUOTE
Cubic Feet: 13.61
Square Feet: 163.33
Material: Polyprop
Manufacturer: JWI
Stock #: 40464002

40464002
Used- JWI Filter Press, Model 800G32-30/50-15/25DA.  (31) 31 1/2" x 31 1/2" (800 mm x 800 mm) polypropylene plates, approximate 1" cake. Approximate 163.33 square feet filter area, 13.61 cubic feet capacity. 100 psi max filtration pressure, 3300 psi hydraulic closing pressure. Center feed, four corner discharge, single ram, air over oil. Mounted details

REQUEST PRICE QUOTE
Cubic Feet: 10.44
Square Feet: 125.22
Material: Polyprop
Manufacturer: JWI
Stock #: 40464003

40464003
Used- JWI Filter Press, Model 800G2-23-11.5DA. (24)  31 1/2" x 31 1/2" (800 mm x 800 mm) polypropylene plates, approximate 1" cake. Approximate 125.22 square feet filter area, 10.44 cubic feet capacity. 100 psi max filtration pressure, 3300 psi hydraulic closing pressure. Center feed, four corner discharge, single ram, air over oil. Mounted on a carbon details

REQUEST PRICE QUOTE
Cubic Feet:
Square Feet:
Material:
Manufacturer: BDP Industries
Stock #: 40551001

40551001
Used-BDP Industries mobile belt filter press, model  3DP. One (1) meter capacity, 3.2 meter wide belt, 290 mm long x 164 mm wide x 132 mm high. Currently mounted on curtain side step deck trailer including sludge pump, polymer system including mix tank, 17 foot BDP gravity belt section, rear ejection conveyor, wash water booster pump and control panel. details

REQUEST PRICE QUOTE
Cubic Feet: .5
Square Feet: 11.76
Material: 316SS
Manufacturer: N/A
Stock #: 40530028

40530028
Used- Plate and frame filter press, 316 stainless steel.  (7) 11'' X 11'' x 5/8'' thick plates, (7) 11'' x 11'' 1'' thick frames, (1) head, (1) tail plate. Approximately 11.76 square feet filter area, .5 cubic feet of cake capacity. Corner feed and discharge. Manual closure. Mounted on casters. details

REQUEST PRICE QUOTE
Cubic Feet: 4.94
Square Feet: 79.07
Material: 316SS
Manufacturer: Seitz Orion
Stock #: 40530002

40530002
Used- Seitz Orion plate and frame filter press, type  60A80, 316 stainless steel. (11) 22 3/4'' X 22 3/4'' 1/2 thick plates, (11) 22 3/4'' x 22 3/4'' 1 1/2'' thick frames, (1) head, (1) tail plate. Approximately 79.07 square feet filter area, 4.94 cubic feet of cake capacity. Corner feed and discharge. Manual closure. Maximum operating pressure 8 bar. details

REQUEST PRICE QUOTE
Cubic Feet: 2
Square Feet:
Material:
Manufacturer: JWI
Stock #: 14212001

14212001
Used JWI (US Filter - Siemens) 2 cu ft Filter Press.  Automatic, air/hydraulic.Seal replaced, hydraulics now go to 5,000 PSI.Filter cloths look like new.Tested great, no leaks. details

REQUEST PRICE QUOTE
Cubic Feet:
Square Feet:
Material:
Manufacturer:
Stock #: 14212000

14212000
Used Slim Line, Model #SL 36-30 Filter, recently rebuilt.  Previously used on brass, but can be used for other plating solutions such as nickel or zinc. Chamber lining and plates are in very good condition. Best guess on year of manufacture is 1995-96. details

REQUEST PRICE QUOTE
Cubic Feet: .24
Square Feet: 5.8
Material: 316SS
Manufacturer: Seitz Enzinger Noll
Stock #: 24546003

24546003
Used- Seitz Enzinger Noll polishing press, type 20/17.  (18) 7" x 7" 316 stainless steel plates, approximately 1/2" thick. Approximate 5.8 square feet filter area, (.24) cubic feet capacity. Manual closure, corner feed and discharge, bottom drop pan. Mounted on casters. details

REQUEST PRICE QUOTE
Cubic Feet: 10
Square Feet:
Material:
Manufacturer: WWE
Stock #: 13527009

13527009
Used-WWE 10 cubic foot filter press. (21) 800 mm CGR  polypropylene plates. 1 and 3 buttom design. Center feed, 4 corner return with air blow down. Plastic side rail caps. Automatic hydraulic closure, pump rated 4300 psi closing pressure. OAD: 10' long x 4' wide x 5' high. details

REQUEST PRICE QUOTE
Cubic Feet:
Square Feet:
Material:
Manufacturer: Parkson
Stock #: 40376001

40376001
Used-Parkson 2 meter belt filter press. Includes Moyno  pump, Goulds pump, (1) new stainless steel control panel, (1) new control cabinet with Allen Bradley PLC, tank with new agitator, new polymer feed pump (in box), new belts, new bearings, heavy duty industrial epoxy primer and paint (15 mils thick). Reported to be reconditioned. details

REQUEST PRICE QUOTE
Cubic Feet: 75
Square Feet:
Material:
Manufacturer: JWI
Stock #: 40375002

40375002
Used-JWI filter press, 75 cubic feet, 1200G32-62-755A,  3506. Max filtration pressure 100 psi, hydraulic closing pressure 2800 psi. Contains new filter cloths. details

REQUEST PRICE QUOTE
Cubic Feet: 75
Square Feet:
Material:
Manufacturer: JWI
Stock #: 40375001

40375001
Used-JWI filter press, 75 cubic feet, 1200G32-62-755A,  3506. Max filtration pressure 100 psi, hydraulic closing pressure 2800 psi. Contains new filter cloths. details

REQUEST PRICE QUOTE
Cubic Feet:
Square Feet:
Material:
Manufacturer: Waterlink Lanco
Stock #: 40247004

40247004
Used-Waterlink Lanco oil rig filter press, model 1000-25A.  225 psi with stainless steel manifold; 39 plates 39" x 39"; 16'5" long, 54" x 8'2" tall. 18,000 lbs. details

REQUEST PRICE QUOTE
Cubic Feet: 15
Square Feet:
Material: poly
Manufacturer: Flow Trend
Stock #: 40247003

40247003
Used-Flow Trend center feed filter press. 32 plates  39" x 39"; 14' long x 48" wide. Weight 10,000 lbs. details

REQUEST PRICE QUOTE
Cubic Feet: 48
Square Feet: 1325
Material: CS
Manufacturer:
Stock #: 40037020

40037020
Used: Filter Press, 47" x 47". (51) 2 1/2'' thick polypropylene  plates, 1/2'' recess. (1) head, (1) tail plate. 4 corner feed. Approximate 1325 square feet filter area, 48 cubic feet cake. Double hydraulic ram. details

REQUEST PRICE QUOTE
Cubic Feet: 25
Square Feet: 550
Material: CS/POLY
Manufacturer:
Stock #: 40037030

40037030
Used: Filter Press, 48" x 48". (20) 2 1/2'' thick polypropylene  plates, 1/2'' recess. (1) head, missing tail plate. 4 corner feed. Approximate 550 square feet filter area, 25 cubic feet cake. Double hydraulic ram. details

REQUEST PRICE QUOTE
Cubic Feet: 70
Square Feet: 870
Material: carbon steel/poly
Manufacturer: Hoechst
Stock #: 90337

90337
USED: Hoescht filter press, model M42PP26. Carbon steel  frame. (62) 42" x 42" polypropylene plates, approximate 870 square feet filter area, 70 cubic feet cake capacity, 100 psi max filter pressure. (1) head, (1) tail plate. Center feed 4 corner discharge, dual ram. details

REQUEST PRICE QUOTE
Cubic Feet: 87
Square Feet: 1053
Material: carbon steel/poly
Manufacturer: Sperry
Stock #: 90342

90342
USED: Sperry filter press, type 21, size 48. (85) 48"  x 48" polypropylene plates, approximate 1/2" deep recess each side. Approximate filter area 1053 square feet, approximate 87 cubic feet cake capacity, 100 psi max filter pressure. (1) Head, (1) tail plate, center feed (4) corner discharge, single ram. Air/oil hydraulic closure. Includes an overhead details

REQUEST PRICE QUOTE
Cubic Feet: 43.75
Square Feet:
Material: carbon steel/poly
Manufacturer: Durco
Stock #: 90225

90225
USED: Duro filter press, carbon steel frame. (36) 48"  x 48" polypropylene plates, 43.75 cubic feet cake capacity, approximate 100 psi max filter pressure. Center feed 4 corner discharge, dual ram. Unit includes overhead plate shifter, approximate 25' long stainless steel discharge screw conveyor with a 5 hp motor. Built 1983. details

REQUEST PRICE QUOTE
Cubic Feet: 1.47
Square Feet: 40
Material: polypropylene
Manufacturer:
Stock #: 89569

89569
USED: Plate and frame filter press. 15 polypropylene  plates 18" x 18" and 13 frames 18" x 18", 1" thick. Approximate 40 square feet capacity, approximate 1.47 cubic feet capacity. Corner feed, corner discharge, hydraulic closing device. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Cubic Feet: 1
Square Feet:
Material:
Manufacturer: Ashbrook
Stock #: 523900

523900
USED: 1.7 Meter Ashbrook filter belt press mounted  on a 45 footenclosed trailer. The trailer has fold down walkways on each sideand a front control room. The system is set up with two poly mixtanks, sludge pump, boost water pump, poly pump, belly drain pan andcontrol panel. Its only use was a trial run of 8,000 gallons of 2%sludge. Flow capacity is details

REQUEST PRICE QUOTE
Cubic Feet: 23.7
Square Feet: 284.4
Material: polypropylene
Manufacturer: JWI
Stock #: 89455

89455
USED: JWI filter press, model 800N32. (39) 32" x 32"  polypropylene plates, approximate 1" cake. Approximate 284.4 square feet filter area, 23.7 cubic feet capacity. 100 psi max filtration pressure, 3300 psi hydraulic closing pressure. (1) Head, (1) tail. Center feed, four corner discharge, single ram air over oil. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Cubic Feet: 82
Square Feet: 992
Material: CS POLY
Manufacturer: Perrin
Stock #: 89399

89399
USED: Perrin filter press, (50) 59" x 59" polypropylene  plates, approximate 1" cake. Approximate 82.69 cubic feet cake capacity, approximate 992.25 square feet of filter area. 3000 PSI cylinder closing pressure, 36.00 stroke. (1) head and (1) tail plate. Top center feed, four corner discharge, single ram, operated by a 5 HP, hydraulic pump. Includes hydraulic details

REQUEST PRICE QUOTE
Cubic Feet: 86
Square Feet: 1032
Material: CS POLY
Manufacturer: Perrin
Stock #: 89400

89400
USED: Perrin filter press, (52) 59" x 59" polypropylene  plates, approximate 1" cake. Approximate 86 cubic feet cake capacity, approximate 1,032.75 square feet of filter area. 3000 PSI cylinder closing pressure, 36.00 stroke. (1) head and (1) tail plate. Top center feed, four corner discharge, single ram, operated by a 5 HP, hydraulic pump. Includes hydraulic details

REQUEST PRICE QUOTE
Cubic Feet: 30
Square Feet: 418
Material: polypropylene
Manufacturer: Shriver
Stock #: 89096

89096
USED: Eimco Shriver filter press, model M1000FB. Carbon  steel frame. (40) 39.3" x 39.3" x approximately 2-1/2" thick x approximately 1/2" recess polypropylene plates, (1) head plate, (1) tail plate. Approximately 418 square feet filter area, 30 cubic feet cake capacity, 100 psi max filter pressure. Center feed, four corner discharge, single ram. Includes details

REQUEST PRICE QUOTE
Cubic Feet:
Square Feet: 850
Material: stainless steel
Manufacturer: Velo
Stock #: 523498

523498
USED: Velo model type 800.97.16652.8, 800mm plate and  frame DEfilter, 550 square feet, 850 liters internal volume, with 99 sanitarypolished stainless steel plates and frames. Each plate is 32" x 32"with 50 screen type filtering plates and 50 sludge frames, 4 eyeclosed delivery. The filter is equipped with automatic hydraulicclosing mechanism with reservoir details

REQUEST PRICE QUOTE
Cubic Feet: 16
Square Feet: 360
Material: carbon steel/poly
Manufacturer: JWI
Stock #: 87597

87597
USED: JWI J-VAP dewatering/drying system, model 1000V30-22-16SYLC.  (22) 1000 mm (39 x 39) steam heated chambers, approximate 1/2" recess. Total filter area 360 square feet, 16 cubic feet cake capacity, approximate 100 psi max filter pressure. Head and tail plates, center feed (4) corner discharge, overhead plate shifter. Includes an approximate 5 hp vacuum system with details

REQUEST PRICE QUOTE
Cubic Feet:
Square Feet:
Material:
Manufacturer: JWI
Stock #: 523027

523027
USED: JWI poly filter press, 85 frames 42" x 42", year  2001. Catwalkand 4" diaphragm pump, conveyor system underneath to a conveyorsystem to load the truck. Previously used for clay tiles. details

REQUEST PRICE QUOTE
Cubic Feet:
Square Feet:
Material:
Manufacturer: Eimco
Stock #: 522946

522946
USED: 24" x 24" Eimco Shriver filter press, 14 plates,  model M630FB.Maximum filtering pressure 225 psi. Maximum thrust 65 tons. Maximumoil pressure 1600 psi. Inlet air pressure 80 psi. With 14 polypropy-lene caulked and gasketed O-ring recessed plates. Flow design iscenter feed, four corner discharge. Plates are 2.25" thick and 24" x24" square, CGR design details

REQUEST PRICE QUOTE
Cubic Feet: 9.8
Square Feet: 187
Material:
Manufacturer: Filtration & Separat
Stock #: 522933

522933
NEVER USED: Filtration & Separation Dynamics model  EP630/32-30 filterpress. 187 square foot filtration area. 9.8 cubic foot press capacity. Max feed pressure 100 psi. Max operation temp 250 deg F. Pnumatic extend/retract. Aluminum plates.Shipping weight 6100 lbs. details

REQUEST PRICE QUOTE
Cubic Feet: 44
Square Feet: 1170
Material: carbon steel/poly
Manufacturer: Perrin
Stock #: 87117

87117
USED: Perrin filter press, model 100-48. (44) 48" x  48" polypropylene chambers, approximate 1/2" deep. Total filter area 1170 square feet, 44 cubic feet cake capacity, approximate 100 psi max filter pressure, (1) head, (1) tail plate, center feed (4) corner discharge, single ram. Unit includes a side plate shifter and a 60" wide x 12' long x approximate details

REQUEST PRICE QUOTE
Cubic Feet: 8.8
Square Feet: 106
Material: carbon steel/polypro
Manufacturer: Sperry
Stock #: 86987

86987
USED: Sperry filter press, carbon steel frame. 36"  x 36" polypropylene, approximately 15 plates 1" thick, and 17 frames 1-1/4" thick. Approximate 8.8 cubic feet cake capacity, approximate 106 square feet filter area. Manual close, 2 eye. details

REQUEST PRICE QUOTE
Cubic Feet: 30
Square Feet: 355
Material: carbon steel/polypro
Manufacturer: Shriver
Stock #: 86988

86988
USED: Shriver filter press, carbon steel frame. 36"  x 36" polypropylene, approximately 51 plates 1" thick, and 50 frames 1-1/4" thick. Approximate 30 cubic feet cake capacity, approximate 355 square feet filter area. Hydraulic ram, 4 eye. Stainless clad rails. details

REQUEST PRICE QUOTE
Cubic Feet: 10
Square Feet: 120
Material: polyprop
Manufacturer: Sperry
Stock #: 86831

86831
USED: Sperry plate and frame filter press, type 41-4,  size 24, carbon steel frame. (15) 24" x 24" x 1" thick polypropylene plates, (15) 24" x 24" polypropylene 2" thick frames. Approximate 120 square feet filter area, 10 cubic feet cake capacity. Hydraulic closure, (1) head plate, corner feed, corner discharge, single ram. details

REQUEST PRICE QUOTE
Cubic Feet: 1.88
Square Feet: 45
Material: carbon steel/poly
Manufacturer: Sperry
Stock #: 86833

86833
USED: Sperry plate and frame filter press, type 21,  size 18, carbon steel frame. (10) 18" x 18" polypropylene plates, (10) 18" x 18" polypropylene 1" thick frames. Approximate 45 square feet filter area, 1.88 cubic feet cake capacity. Manual hydraulic closure, (1) head plate, corner feed, corner discharge, single ram. details

REQUEST PRICE QUOTE
Cubic Feet: 13.78
Square Feet: 165
Material: carbon steel/poly
Manufacturer: Eimco
Stock #: 86834

86834
USED: Eimco Shriver filter press, model M800FB, carbon  steel frame. (23) 31.5" x 31.5" x 2-1/2" thick x approximate 1/2" recess polypropylene plates; (1) head, (1) tail plate. Approximate 165 square feet filter area, 13.78 cubic feet cake capacity, 100 psi max filter pressure. Center feed, corner discharge, single ram. details

REQUEST PRICE QUOTE
Cubic Feet:
Square Feet: 16
Material: 304 stainless steel
Manufacturer: Carlson
Stock #: 86529

86529
USED: Carlson polishing press, 304 stainless steel,  12 stainless steel plates 14" x 14". Approximately 16 square feet of filter area. 1" bottom corner feed with 2 hp pump, manual closing device. Mounted on a carbon steel frame with casters. details

REQUEST PRICE QUOTE
Cubic Feet: .95
Square Feet: 22
Material: 316 stainless steel
Manufacturer: Ertel
Stock #: 86486

86486
USED: Ertel plate and frame polishing press, model  EUS-10-10, all 316 stainless steel. 16" x 16" plates and frames, (3) frames 2" thick, (4) frames 3/8" thick, (8) plates. Approximate 22 square feet filter area, approximate .95 cubic feet cake capacity. Head and tail plates, 1" tri clamp inlet / outlet. Hand ratchet closure. Mounted on a stainless steel details

REQUEST PRICE QUOTE
Cubic Feet: 50
Square Feet: 914
Material: polyprop/carbon stee
Manufacturer: Netzsch
Stock #: 86056

86056
USED: Netzsch filter press, model 1200/LP/36. (36)  1200mm (47.2" x 47.2") polypropylene plates, approx 1/2" deep. Total filter area 914 square feet, 50 cubic feet cake capacity, approx 100 psi max filter pressure. Head and tail plates, center feed 4 corner discharge, single ram. Unit includes an overhead plate shifter and Bombay bottom doors. details