|
|
13506014
Used-Bonnot 4" single screw extruder, model 4"SS/TWN PKR. Stainless steel contact parts. Equipped with twin packer dual agitated feed throat. Jacketed barrel measures 7' long from front of the feed throat. Screw is cored for heating. Driven by a 15 hp Eurodrive motor 3/60/230/460V, 1740 rpm. Eurodrive gearbox has 16.56:1 ratio, 4.2 service factor, 105 details
|
|
|
40530003
Used- Miltenz single screw laboratory steam extruder, model 51-SP. Approximate 2'' diameter screw. Approximate capacity 15 to 60 kg/hr. (4) barrel sections, water heated and cooled. Includes a model 515P steam conditioner with top screw feed, conditioning chamber, bottom force feed, (1) end cutter, with blades, and a control panel with (4) Allen Bradley details
|
|
|
|
|
90474
USED: Amberette Machinery Corp. extruder. Approximatly 6'' diameter x 48'' long Incoloy screw, driven by a 40hp,3/60/230/460 volt, 1760 rpm motor thru a Shimpo ringcone reducer, thru a sew reducer, ratio 14.7 to 1.Carbon steel jacketed barrel. Top mounted 304 stainless steel, and carbon steel conditioning hopper with agitator, and a Pennwalt feeder. Agitator details
|
|
|
522925
USED: Amandus Kahl continuous reciprocating feeder - paddle mixer,type M500, 316 stainless steel construction. Drive is Eurodrive,1740/118 rpm, 480 volt, 14.2 amps. Overall length is 157". Inlet is19" diameter. Outlet is 20" diameter. Center of feed to center ofdischarge is 71". Center of pivot point to center of outlet is 69".Pivot shaft is 3" diameter details
|
87171
USED: Bonnot forming extruder with cutter, model 10Preform, carbon steel. Approximately 10" diameter x 86" long chrome plated screw, approximate 9" diameter counter-rotating packer screw, (2) section jacketed barrel. 19" x 30" feed throat, no hopper. Unit driven by an 18.5 kw (25 hp), 3/60/266/460 volt, 1170 rpm motor with reducer. Unit includes an end air operated details
|
|
|
|
|
|
|
86248
USED: C A Lawton 285 ton lithium extruder, model 285TONEX. Barrel diameter 4-1/2" x 38" long, stroke 58", daylight, extruder retracted 20", fast close 50" per minute, slow close .02" to 14.6" per minute, fast open 60" per minute. Driven by a 30 hp hydraulic power pack. Includes a Technical Development Corp lithium threader, vacuum pump and control panels. details
|
|
|
|
|
81116
USED: Bonnot extruding system consisting of (2) Bonnot 2" labextruders, 20" long carbon steel jacketed barrels. Each driven by a3 hp, 3/60/230/460 volt, 1770 rpm gearmotor, ratio 22.4:1. (2) 4"diameter tapered screw vertical feeders with jacketed feed hoppers,each driven by a 1-1/2 hp Reeves varispeed drive, min/max rpm 3.2/29.2. (2) Reliance SP500 VS drives. details
|
81117
USED: Bonnot extruding system consisting of (2) Bonnot 2" labextruders, 20" long carbon steel jacketed barrels. Each driven by a3 hp, 3/60/230/460 volt, 1770 rpm gearmotor, ratio 22.4:1. (2) 4"diameter tapered screw vertical feeders with jacketed feed hoppers,(1) driven by a 1-1/2 hp Reeves varispeed drive, min/max rpm 3.2/29.2; (1) driven by a SEW Eurodrive details
|
|
|
79115
UNUSED: Bonnot extruder, model 12COLDEXTRUDER, 304 stainless steel.12" diameter, 8:1 L/D, 2 section carbon steel jacket. 12" diameter feed section with a12" diameter discharge with end strand hole plate.Driven by a 75 HP, 3/60/575 volt 1780 RPM motor thru reducer, ratio 57.22:1 Linkbelt gearbox. details
|
519430
USED: Bonnot 8" extruder, carbon steel jacketed with 8" x 12" feedopening and 26" long jacketed barrel designed for 15 psi. Drive isFalk gear reducer model 208042-B with input rpm 866, output rpm 29.2,ratio is 29.72, ratio is 2.96. 15 hp 3/60/220/440 drive. Unit needsmain shaft and other related parts to be complete. Mounted on carbonsteel 1-1/4" thick details
|
77286
USED: Fate-Root-Heath ceramic extrusion press, model PX3-CHTJ.Setmented 3" diameter screw feeder x 7" long. Auger speed set forinfinite variation between 10 and 30 rpm. 4-1/2" x 4" deaeratingchamber. 5-3/4" x 2-7/8" feed with cover. Includes a vacuum pump,1/3 hp 1800 rpm. Drive is a Reeves 1 hp output, rpm min 28, max 84.Body is removable for auger access. details
|
70799
USED:Bonnot cheese chopper/extruder, stainless steel. 20" diameter x50" long screw driven by a 60 hp, 3/60/230/460 volt, 1775 rpm motorthru a Dodge torque arm, model TDT10. Non-jacketed trough 20-1/2" x30" x 25" deep. 20" long bolt-on jacketed rifled barrel, 12" diameterdischarge with die plate, swing-away die clamp. Unit base mounted. details
|
69267
USED: Handle model PZVHTG 25a/25/25a combined de-airing extrusion machine. Consisting of: 1 horizontal primary pug mill, 15-3/4" x 15-3/4" feed with a single dispersion blade mixer, 10" diameter x 40" long, segmented screw and barrel with replaceable rifled liners. Belt driven by a 19.4 kw, 480 volt, DC drive thru a reducer. 15" x 15" lateral cleaning door, details
|
|
|
|
|