More Info
Diameter (in.): 30
Height (in.): 24
Material: SS
Type: Gas / Elec
42198001
Used Niro Atomizer Spray Dryer, Model Mobile Minor, Drying CHamber: 30" diameter x 24" straight side. / 800 mm diameter x 600 mm straight side cone angle 60 degrees, Stainles steel AISI 316 Atomizer: Rotates up to 40,000 RPM Max Inlet Air Temp: 350 c Max Outlet Air Temp: 120 c Dimensions: 75" x 41" x 68" h VOLTS: 200/220/380/400/415/440 AMPS: 25/16 details
|
More Info
Diameter (in.): 161
Height (in.): 362
Material: Stainless Steel
Type:
41174016
Used- APV Pasilac Anhydro spray dryer, stainless steel, evaporation capacity 1764 - 2200 lbs/hour (800 - 1000 kg/hour), 660 - 2420 lbs/hour (300 - 1100 kg/hour) of agglomerated milk powder, with internal and external NIRO type fluid beds and disc atomizer, chamber diameter approximately 161" (4100 mm) and height 362" (9200 mm). details
|
|
|
More Info
Diameter (in.): 48
Height (in.): 30
Material: 304SS
Type: SPRAY DRYER
41694001
Used- Niro Versitile Utility Spray Dryer, 304 Stainless Steel. Up to 10 to 25 kilograms an hour (22-55#) evaporation capacity. Electrically heated chamber 48" diameter x 30" straight side x 36" coned bottom. Side inspection door with sight glass. Unit includes 1.1 KW blower motor, no blower; 5 hp atomizer motor, no atomizer; a control panel, and some piping. details
|
More Info
Diameter (in.): 48
Height (in.): 30
Material: 316SS
Type: SPRAY DRYER
41694002
Used- Niro Versitile Utility Spray Dryer, Model V, 316 Stainless Steel. Up to 10 to 15 kilograms an hour (22-33#) evaporation capacity. Electrically heated chamber 48" diameter x 30" straight side x 36" coned bottom. Side inspection door with sight glass. Unit includes 1.5 KW blower motor, no blower. Set up for two fluid nozzle atomization, no atomizers. details
|
|
|
More Info
Diameter (in.): 7
Height (in.):
Material: 316SS
Type: BEL-521
10147006
Used-APV Anhydro spray dryer "closed circuit spin flash dryer", no. BEL-521, new 1995, in stainless steel (316), drying tower diameter 200mm (8''), motor 0,75 kW (1 hp), 380-420/220-240 volt, evaporation capacity 4-15 kg (9-33 lbs) water/h (75-250 deg C (167-500 deg F), air heating (electric) 20 kW (27 hp), with cyclone, cyclone size diameter 250 mm (10''), details
|
|
|
More Info
Diameter (in.): 30
Height (in.): 74
Material: 316SS
Type: SPRAY
40786001
Used- Niro/Bowen #1 Tower Gas Heated Spray Dryer, 316 stainless steel. Approximately 30'' diameter x 74' straight side x 36'' coned bottom chamber. Inlet air temp 500 deg C maximum. Airflow 250 cfm at 80 deg C. Approximately 5 to 40 KG/ hour (11-88 pounds an hour) water evaporation. Side access door. Mounted on a stainless steel frame. (1) Type 59-C-04 details
|
More Info
Diameter (in.):
Height (in.):
Material: 316L stainless steel
Type:
40685001
Used-Niro fluidized spray dryer, model FSD-0050-N-FV, mfg 1994. 316L stainless steel, 250 kg/hour @ 40% solids. Also includes the following:high pressure pump, rotary valve, gas fired heater, heat exchanger, tank, 5 blowers, scrubber, cooler. details
|
|
|
More Info
Diameter (in.): 108
Height (in.): 162
Material: 304 stainless steel
Type:
89596
USED: Anhydro gas heated spray dryer, size number 5/6, type III-AK, 304 stainless steel. Approximate 9' diameter x 13' straight side x 9' coned bottom chamber. Inlet air temp 662 deg F, outlet air temp 257 deg F, feed temp 70 deg F. Approximately 300 pounds an hour water evaporation, powder production 1,200 pounds an hour. Fluid bottom up nozzle assembly. details
|
More Info
Diameter (in.): 63
Height (in.): 33
Material: 304 stainless steel
Type:
89599
Used- Ohkawara Spray Dryer, 304 stainless steel. Electrically heated chamber 63" diameter x 33" straight side x 26" coned bottom, missing clamp-on bottom outlet section. Top mounted atomizer, no wheel. Driven by a 2 hp, 3/60/460 volt, 3510 rpm motor. Side access door. Unit includes a cyclone with collection jar, 2 blowers and a control panel. Mounted on a carbon details
|
More Info
Diameter (in.): 96
Height (in.): 120
Material: stainless steel
Type:
522079
USED: Niro spray dryer, 8' diameter chamber, stainless steel construction. Includes control panel, burner, gas train combustion blower, 2 rebuilt atomizer units (spare), 1 serviceable atomizer(installed), 3 atomizer rebuild kits, 11 oil filters, 4 liquid distributors, 1 new Hastelloy wheel, 1 stainless steel wheel plus miscellaneous parts, specialty tools details
|
More Info
Diameter (in.): 30
Height (in.): 72
Material: Stainless Steel
Type: Wheel
82483
USED: Bowen Engineering gas heated ceramic type lower laboratory spray dryer, 316 stainless steel. 30" diameter x 72" straight side x 38" coned bottom. Type 59 (2) fluid bottom up nozzle assembly, approximate evaporation rate up to 30 pounds an hour, air requirements 50 psi, temp range 150-750 deg F, side access door. Unit includes a cyclone, gas heater, details
|
More Info
Diameter (in.): 39
Height (in.): 27.6
Material: Stainless Steel
Type:
81957
USED: PTX Pentronix multi-sprayer, model 370, stainless steel. Electrically heated chamber 39" diameter x 27" straight side x coned bottom. 10" bottom outlet. Self-contained heat source with blower, side mounted cyclone with blower, front access door with sightglass. Includes atomizer assembly, no wheel. Unit rated approximately 3 liters per hour. details
|
More Info
Diameter (in.): 96
Height (in.): 100.8
Material: Stainless Steel
Type:
521315
USED: 8' APV Anhydro spray dryer, type III-A, No 4. 8' diameter x 100" straight side, flat bottom, stainless steel construction, with model CB-160 Anhydro centrifugal atomizer with 5 hp AC motor with inverter, bottom sweeping broom driven by a .5 hp 115/230 volt gearhead drive, gas fired hot air makeup system with burner, stainless steel cyclone fines details
|
More Info
Diameter (in.): 122
Height (in.): 157.2
Material: 304 Stainless Steel
Type:
520599
Used- Anhydro Inc Series 6, Model 3, 1979, 333 lbs/hour, 304 stainless steel spray dryer. 10'2" x 13'10" wide, 7' BC plus dust collector, vertical, 6" BCO, 15" x 19" side top inlet. 480V, 3 ph, 60 hz, 5 kw consumption. Gas fired with electric duct heaters. Air in = 600 deg F. Out = 300 deg F. Feed = 60 deg F. details
|
More Info
Diameter (in.): 123
Height (in.): 216
Material: 316 Stainless Steel
Type:
520600
USED: Anhydro Inc series 6, model 4, 1983, 427 lbs/hour, 316 stainless steel feed, bal 304 stainless steel spray dryer, 10'3" x 18' wide, 7' BC plus dust collector, vertical, 8" BCO, 15" x 19" side top inlet, 480V, 3 ph, 60 hz, gas fired with electric duct heaters. Air in = 600 deg F. Out = 300 deg F. Feed = 60 deg F. Feed = 577 lbs/hour. Water evap = 150 details
|