Rotary Hot Air Dryers - Drying Equipment

E-mail this page Printable Version Sell your Machinery

20 Rotary Hot Air Dryers - Drying Equipment In Stock

  »Click on links to view detailed information and additional photos
 
REQUEST PRICE QUOTE
Diameter (in.): 8
Length (in.): 36
Material: Carbon Steel
Heat Source:
Stock #: 40081001

40081001
Used Portable Aggregate Dryer. 8’ diameter X 36’ long,  Carbon steel construction. Dryer was rebuilt in 2005, Fully Flighted, 75 HP Saddle chain drive, 75HP Siemens premium efficiency motor. Includes inlet and outlet breechings, Used for less then 30,000 tons… details

REQUEST PRICE QUOTE
Diameter (in.): 24
Length (in.): 20
Material:
Heat Source:
Stock #: 523872

523872
USED: Bartlett Snow calciner, approximately 24" diameter  x 20" long.Carbon steel tube. details

REQUEST PRICE QUOTE
Diameter (in.): 150
Length (in.): 504
Material:
Heat Source:
Stock #: 523143

523143
USED: Heil model 125-42 dryer, 12'6" diameter x 42'  long. Evaporationcapacity 27,000 lbs/h. Includes high pressure blower for bunker fuel,modulated dose control valve, oven with refractory bricks reported ingood condition, bunker fuel heat exchanger, provisions to use naturalor LPG. Fan with 200 hp motor, primary cyclone, ducting, secondarycyclone, computerized details

REQUEST PRICE QUOTE
Diameter (in.): 126
Length (in.): 384
Material:
Heat Source:
Stock #: 523159

523159
USED: Heil model 105-32 dryer, 10'6" diameter x 32'  long. Evaporationcapacity 18,000 lbs/h. Includes high pressure blower for bunker fuel,modulated dose control valve, oven with refractory bricks reported ingood condition, bunker fuel heat exchanger, provisions to use naturalor LPG. Fan with 100 hp motor, primary cyclone, ducting, secondarycyclone, computerized details

REQUEST PRICE QUOTE
Diameter (in.): 54
Length (in.): 480
Material:
Heat Source:
Stock #: 523070

523070
USED: Rotary dryer, approximately 4'6" x 40' long,  natural gas directfire. (Assuming refractory lined), insulated shell, skid mounted. details

REQUEST PRICE QUOTE
Diameter (in.): 144
Length (in.): 540
Material:
Heat Source:
Stock #: 85974

85974
USED: (1) Set of trunnions for an approx 12' diameter  x 45' longrotary dryer. Trunnion rolls 30" diameter x 11" face. Includes a20 hp, 3/60/220/440 volt, 1750 rpm motor with a Falk reducer, ratio25.84:1. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 156
Material: 304 stainless steel
Heat Source:
Stock #: 83223

83223
USED: Rotary air dryer, 304 stainless steel. Horizontal  insulated tube 60" diameter x 156" long, end feed and discharge. 5" wide internal flights. Driven by a 3 hp, 3/60/460 volt, 1765 rpm XP motor with reducer. Includes a stainless steel blower, driven by a 25 hp, 3/60/230/460 volt, 1770 rpm XP motor. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 156
Material: 304 stainless steel
Heat Source:
Stock #: 83224

83224
USED: Rotary air dryer, 304 stainless steel. Horizontal  insulated tube 60" diameter x 156" long, end feed and discharge. 5" wide internal flights. Driven by a 3 hp, 3/60/460 volt, 1765 rpm XP motor with reducer. Includes a stainless steel blower, driven by a 25 hp, 3/60/230/460 volt, 1770 rpm XP motor. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 156
Material: 304 stainless steel
Heat Source:
Stock #: 83226

83226
USED: Rotary air dryer, 304 stainless steel. Horizontal  insulated tube 60" diameter x 156" long, end feed and discharge. 5" wide internal flights. Driven by a 3 hp, 3/60/460 volt, 1765 rpm XP motor with reducer. Includes a stainless steel blower, driven by a 25 hp, 3/60/230/460 volt, 175 rpm XP motor. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 156
Material: 304 stainless steel
Heat Source:
Stock #: 83227

83227
USED: Rotary air dryer, 304 stainless steel. Horizontal  insulated tube 60" diameter x 156" long, end feed and discharge. 5" wide internal flights. Driven by a 3 hp, 3/60/460 volt, 1765 rpm XP motor with reducer. Includes a stainless steel blower, driven by a 25 hp, 3/60/230/460 volt, 1760 rpm XP motor. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 156
Material: 304 stainless steel
Heat Source:
Stock #: 83229

83229
USED: Rotary air dryer, 304 stainless steel. Horizontal  insulated tube 60" diameter x 156" long, end feed and discharge. 5" wide internal flights. Driven by a 3 hp, 3/60/460 volt, 1765 rpm XP motor with reducer. Includes a stainless steel blower, driven by a 25 hp, 3/60/230/460 volt, 175 rpm XP motor. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 156
Material: 304 stainless steel
Heat Source:
Stock #: 83230

83230
USED: Rotary air dryer, 304 stainless steel. Horizontal  insulated tube 60" diameter x 156" long, end feed and discharge. 5" wide internal flights. Driven by a 3 hp, 3/60/460 volt, 1765 rpm XP motor. Mounted on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 60
Length (in.): 156
Material: 304 stainless steel
Heat Source:
Stock #: 83231

83231
USED: Rotary air dryer, 304 stainless steel. Horizontal  insulated tube 60" diameter x 156" long, end feed and discharge. 5" wide internal flights. Driven by a 3 hp, 3/60/460 volt, 1765 rpm XP motor with reducer. Includes a Westinghouse model SA417M stainless steel blower, driven by a 40 hp, 3/60/230/460 volt, 1775 rpm XP motor. Mounted on a carbon steel details

REQUEST PRICE QUOTE
Diameter (in.): 108
Length (in.): 384
Material: Carbon Steel
Heat Source:
Stock #: 521619

521619
USED: FMC Linkbelt "Rotolouver" dryer, model 900-32.  9' diameter x32'. 20mm btu combustor. Complete with a Carter Day HV90 cyclone.Two Micro pulse jet collectors, 144 bags each, 4-3/4" x 8', 1432 sqft each. 600 ton finished product storage, 40 hp combustion blower,twin 125 hp exhaust blowers, feeder and discharge systems, elevatorsand scalping screen. details

REQUEST PRICE QUOTE
Diameter (in.): 20
Length (in.): 120
Material: 304 Stainless Steel
Heat Source:
Stock #: 82137

82137
USED: Griffin and Company conditioning cylinder, 304  stainless steel. 20" diameter x 10' long tube with 4" wide x 1/8" thick internal flights. Approx 18" long middle screen section for heating or cooling, with spray bar. 12" x 15" feed chute, end discharge hood. Driven by a 1 hp, 3/60/230/460 volt, 1750 rpm gearmotor, ratio 29:1. Unit mounts on a carbon details

REQUEST PRICE QUOTE
Diameter (in.): 30
Length (in.): 96
Material: 304 Stainless Steel
Heat Source:
Stock #: 82138

82138
USED: Conditioning cylinder, 304 stainless steel. 30"  diameter x 8' long tube with internal pins. Requires feed chute, includes end discharge hood. Driven by an approx 2 hp Reeves varispeed motor. Unit mounts on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 30
Length (in.): 96
Material: 304 Stainless Steel
Heat Source:
Stock #: 82140

82140
USED: Conditioning cylinder, 304 stainless steel. 30"  diameter x 8' long tube with internal pins. Feed chute, end discharge hood. Driven by a 1 hp, 3/60/230/460 volt, 1725 rpm gearmotor, ratio 11.4:1. Unit mounts on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 48
Length (in.): 192
Material: 304 Stainless Steel
Heat Source:
Stock #: 82141

82141
USED: Griffin and Co conditioning cylinder, 304 stainless  steel. 48" diameter x 16' long tube with internal pins. Feed chute, end discharge hood. Driven by an approx 1 hp, 3/60/230/460 volt, 1750 rpm gearmotor, ratio 17.06:1. Unit mounts on a carbon steel frame. Includes cooling coil, Twin City 1.5 hp blower, spray bars, misc piping. details

REQUEST PRICE QUOTE
Diameter (in.): 24
Length (in.): 96
Material: 304 Stainless Steel
Heat Source:
Stock #: 82142

82142
USED: Griffin and Co conditioning cylinder, 304 stainless  steel. 24" diameter x 8' long tube with internal pins. Requires feed chute, includes end discharge hood. Driven by a 3/4 hp, 3/60/230/460 volt, 1725 rpm gearmotor, ratio 14:1. Unit mounts on a carbon steel frame. details

REQUEST PRICE QUOTE
Diameter (in.): 72
Length (in.): 288
Material:
Heat Source: 150 deg F
Stock #: 520106

520106
USED: Rotary crystallization kiln with 6' diameter  and 24' length within closed containment for temperature controlled processes. Includes air conditioning and refrigeration down to freezing and natural gas fired heater for up to 150 deg F for CIP cleaning. Rotary kiln acid resistant fiberglass. Comes with vacuum filter for freeze extraction/concentration details

Servicing all Major Industries Including: Chemical | Food & Beverage | Pharmaceutical | Plastics | Packaging | Cosmetic | Paint & Coatings | Waste Water